We report the influence of microstructural disorder, introduced by varying nitrogen content, on the vortex dissipation mechanisms of molybdenum nitride thin films grown by reactive sputtering at room temperature. The 22 nm-thick films were deposited at a total pressure of 0.66 Pa using (Ar+N2) mixtures with nitrogen concentrations of 7.5%, 10%, 15%, and 20%. Under these conditions, the superconducting critical temperature (Tc) gradually decreases from approximately 7.6 K to 6.4 K as the N2 concentration in the reactive mixture increases. This reduction in Tc is attributed to increased disorder induced by interstitial nitrogen and amorphous phases, affecting the microstructure of the films. Using current–voltage curves, we investigated vortex instability and the corresponding vortex velocities as functions of temperature and magnetic field. While inhomogeneities and pinning centers are expected to reduce vortex velocities due to localized heating in the bridge, we observed that the velocity plateau at moderate and high fields—typically indicative of a uniform quasiparticle distribution—depends on the microstructure of the samples (linked to Tc) and scales with the absolute temperature at which measurements were conducted. For comparison, nitrogen-doped W thin films with Tc ≈ 4.6 K, and a plateau in the vortex velocities at T = 3 K, show a good match with the values observed in molybdenum nitride samples at higher temperatures. This finding suggests that, in addition to the disorder and intrinsic superconducting properties of the films, thermally activated phonons, potentially associated with the silicon substrate, contribute to the enhancement of vortex velocities within the analyzed temperature range.
A system of magnetite single-domain magnetic nanoparticles in an aqueous colloidal suspension at different temperatures is simulated. In this framework, we study the response of the magnetization of the system to the presence of a time-dependent magnetic field at certain frequency. To do that, a Hamiltonian that includes the Zeeman interaction and the uniaxial magneto-crystalline anisotropy energy is considered. The dynamics of the system is driven according to the solution of the stochastic Landau–Lifshitz–Gilbert differential equation, in combination with a torque term acting on the nanoparticle in order to consider the Brown rotation influenced by the viscosity of the solvent. Thus, both Néel and Brown rotation mechanisms are contemplated. Our results allow us to conclude that Brownian relaxation mediates the alignment of the anisotropy axes with the external field. Thus, depending on the solid or liquid state of the solvent, it is possible to determine the conditions under which a reinforcement of the magnetic anisotropy can take place in order to increase the remanence and squareness of the hysteresis loops.
A standard canonical Markov Chain Monte Carlo method implemented with a single-macrospin movement Metropolis dynamics was conducted to study the hysteretic properties of an ensemble of independent and non-interacting magnetic nanoparticles with uniaxial magneto-crystalline anisotropy randomly distributed. In our model, the acceptance-rate algorithm allows accepting new updates at a constant rate by means of a self-adaptive mechanism of the amplitude of Néel rotation of magnetic moments. The influence of this proposal upon the magnetic properties of our system is explored by analyzing the behavior of the magnetization versus field isotherms for a wide range of acceptance rates. Our results allows reproduction of the occurrence of both blocked and superparamagnetic states for high and low acceptance-rate values respectively, from which a link with the measurement time is inferred. Finally, the interplay between acceptance rate with temperature in hysteresis curves and the time evolution of the saturation processes is also presented and discussed.