Air quality is very important in the people’s lives. In Malaysia, the quality of air needs to be monitored as the level is getting worst day by day. This is especially the case in areas where activities such as construction and quarry mining operate actively. This paper presents the findings of an investigation into air quality status in a community adjacent to a quarry. Air pollutants were monitored according to PM2.5 and PM10, using the TSI 8533 DustTrak, DRX Desktop Aerosol Monitor. The data were used to examine the influence of mining activities (blasting and non-blasting) within variability of PM2.5 and PM10 concentrations inside residential buildings. Indoor dust was collected manually to be tested in the lab to identify the chemical composition. The result indicates that within-day variability of indoor PM2.5 and PM10 was influenced by the occupant’s activities and surrounding outdoor activities such as blasting and vehicle movements. Mitigation measures are proposed to ensure the achievement of sustainable development and indirectly improve the quality of air around the nearby residential area. It is anticipated that both residents and the quarry management are aware of the importance of monitoring air quality towards sustainable life in the future.
Nearly Zero Energy Building (NZEB) leverage passive architectural design and active energy-saving technologies to create comfortable indoor environments while minimising energy use. This study aims to explore the utilisation of Phase Change Materials (PCM) to enhance the thermal inertia of building envelopes, reduce indoor temperature fluctuations, and decrease the capacity requirements of heating and cooling systems. The methodology involves a comprehensive review of the categorisation and properties of PCM, examining their integration with solar, air, and other renewable energy sources. The findings indicate that phase change materials applications in walls, windows, roofs, and floors can significantly enhance thermal inertia, reduce indoor temperature fluctuations, and improve energy efficiency. Additionally, incorporating nanoparticles such as Al₂O₃, TiO₂, and ZnO into PCM has been shown to enhance thermal conductivity, further optimising heat storage performance. The use of PCM presents an efficient and sustainable strategy for improving the energy performance of NZEBs. This study provides a valuable reference for the study and design of nearly zero energy buildings, emphasising sustainability and energy efficiency.
Malaysian low-cost housing developments are one of the solutions to meet the housing demands of the urban B40. However, due to the low pricing and quick building time, the poor architectural quality of those low-cost dwellings is becoming increasingly evident. This research aims to identify a daylighting system for low-cost housing in Sarawak. The outlined objectives of this research are: i) to investigate the daylighting system for low-cost housing in Sarawak and ii) to measure the daylight performance. Three types of low-cost housing in Sarawak with different designs of the house were studied, measured and simulated for daylight performances. The data analysis involved Revit Software for the 3D model and then importing the Revit data to IESVE simulation Software. The illuminance level (lux) and Daylight Factor (DF) of the three houses were tabulated. The result shows, that the low-cost house at Kg Tengah Maludam is having the most effective daylight design system, with enough windows, correct house orientation and the brighter area in the living room, bedroom 1, kitchen and dining room for an entire year.
With the population growing and keeping up with the pace of urbanisation in Malaysia, the terraced residence was constructed to address new social and economic necessities. Modern terraced house is an ideal typology of housing for high-density development. However, these houses, especially intermediate units, often lack natural ventilation, with just two or three façades accessible for openings on the front and rear façades, causing sluggish and inefficient air exchange in the house. As a result, modifications on the fenestration as the application of passive design solutions are required to improve indoor thermal comfort and energy conservation. This research determines the different types of fenestration placement in Malaysian terraced houses as well as analyses how different types of fenestrations in terraced houses affect the energy consumption. This research utilises Revit modeling software to develop a series of prototypes of intermediate terrace houses incorporated with different fenestration treatments. The developed prototypes are tested by conducting building simulation to record findings of building energy performance based on annual and monthly energy consumption. This study concludes that the design of fenestration of terraced house façade effectively reduce energy consumption, thus contributes towards formulating future energy-efficient terraced houses with improved thermal comfort.
Decision-making is essential for maintaining quality in large infrastructure projects like the MRT2 Elevated Project in Klang Valley, Malaysia. Decision-making involves gathering information, evaluating options, and making choices that affect time, cost, and quality. This research examines challenges faced by main contractors in decision-making related to quality and suggests solutions for better project outcomes. A mixed-method approach was used, including a survey of executive-level contractors and interviews analysed with Atlas.Ti. The research identified twelve key issues under three (3) categories: Top Management, Customer Satisfaction, and Strategic Management Process. It also highlighted eight (8) important factors for effective decision-making: strategic management, clear guidelines, quality assurance and control, regular meetings, effective communication, managing constraints, skilled decision-makers, and continuous training. These findings provide practical solutions to improve quality management, helping.