With the rise of Deep Learning approaches in computer vision applications, significant strides have been made towards vehicular autonomy. Research activity in autonomous drone navigation has increased rapidly in the past five years, and drones are moving fast towards the ultimate goal of near-complete autonomy. However, while much work in the area focuses on specific tasks in drone navigation, the contribution to the overall goal of autonomy is often not assessed, and a comprehensive overview is needed. In this work, a taxonomy of drone navigation autonomy is established by mapping the definitions of vehicular autonomy levels, as defined by the Society of Automotive Engineers, to specific drone tasks in order to create a clear definition of autonomy when applied to drones. A top–down examination of research work in the area is conducted, focusing on drone navigation tasks, in order to understand the extent of research activity in each area. Autonomy levels are cross-checked against the drone navigation tasks addressed in each work to provide a framework for understanding the trajectory of current research. This work serves as a guide to research in drone autonomy with a particular focus on Deep Learning-based solutions, indicating key works and areas of opportunity for development of this area in the future.
A series of experiments were conducted to measure and quantify the yield, dry matter content, sugars content, and nitrates content of grass intended for ensilement. These experiments took place in the East Midlands of Ireland during the Spring, Summer, and Autumn of 2019. A bespoke sensor rig was constructed; included in this rig was a hyperspectral radiometer that measured a broad spectrum of reflected natural light from a circular spot approximately 1.2 m in area. Grass inside a 50 cm square quadrat was manually collected from the centre of the circular spot for ground truth estimation of the grass qualities. Up to 25 spots were recorded and sampled each day. The radiometer readings for each spot were automatically recorded onto a laptop that controlled the sensor rig, and ground truth measurements were made either on-site or within 24 h in a wet chemistry laboratory. The collected data was used to build Partial Least Squares Regression (PLSR) predictive models of grass qualities from the hyperspectral dataset, and it was found that substantial relationships exist between the spectral reflectance from the grass and yield (r2 = 0.62), dry matter % (r2 = 0.54), sugar content (r2 = 0.54) and nitrates (r2 = 0.50). This shows that hyperspectral reflectance data contains substantial information about key grass qualities and can form part of a broader holistic data-driven approach to provide accurate and rapid predictions to farmers, agronomists, and agricultural contractors.
To facilitate the integration of autonomous unmanned air vehicles (UAVs) in day-to-day life, it is imperative that safe navigation can be demonstrated in all relevant scenarios. For UAVs using a navigational protocol driven by artificial neural networks, training and testing data from multiple environmental contexts are needed to ensure that bias is minimised. The reduction in predictive capacity when faced with unfamiliar data is a common weak point in trained networks, which worsens the further the input data deviates from the training data. However, training for multiple environmental variables dramatically increases the man-hours required for data collection and validation. In this work, a potential solution to this data availability issue is presented through the generation and evaluation of photo-realistic image datasets from a simulation of 3D-scanned physical spaces which are theoretically linked in a digital twin (DT) configuration. This simulation is then used to generate environmentally varied iterations of the target object in that physical space by two contextual variables (weather and daylight). This results in an expanded dataset of bicycles that contains weather and time-varied components of the same images which are then evaluated using a generic build of the YoloV3 object detection network; the response is then compared to two real image (night and day) datasets as a baseline. The results reveal that the network response remained consistent across the temporal axis, maintaining a measured domain shift of approximately 23% between the two baselines.
A series of experiments were conducted to measure and quantify the yield, dry matter content, sugars content and nitrates content of grass intended for ensilement. These experiments took place in the East Midlands of Ireland during the Spring, Summer and Autumn of 2019. A bespoke sensor rig was constructed; included in this rig was a hyperspectral radiometer that measured a broad spectrum of reflected natural light from a circular spot approximately 1.2 metres in area. Grass inside a 50cm square quadrat was manually collected from the centre of the circular spot for ground truth estimation of the grass qualities. Up to 25 spots were recorded and sampled each day. The radiometer readings for each spot were automatically recorded onto a laptop that controlled the sensor rig, and ground truth measurements were made either on site or within 24 hours in a wet chemistry laboratory. The collected data was used to build Partial Least Squares Regression (PLSR) predictive models of grass qualities from the hyperspectral dataset and it was found that substantial relationships exist between the spectral reflectance from the grass and yield (r2 = 0.62), dry matter % (r2 = 0.54), sugar content (r2 = 0.54) and nitrates (r2 = 0.50). This shows that hyperspectral reflectance data contains substantial information about key grass qualities and can form part of a broader holistic data driven approach to provide accurate and rapid predictions to farmers, agronomists and agricultural contractors.