The total solar irradiance at the top of the atmosphere is the primary source of energy of the Earth’s highly coupled atmosphere–land–ocean system. Small fluctuations of the solar flux density in scales from years to millennia could impact the energy balance of this system due to nonlinear effects. The quantification of this variability depends on absolute radiometers on board of space-based platforms. Although there has been significant improvement in the design and calibration of absolute radiometers during the last decades, the uncertainties in the measurements have not allowed us to untangle the natural and anthropogenic drivers of the observed changes of the climatic patterns appropriately. One of the critical components of the absolute radiometers is the coating of the sensor elements, which should absorb the radiation efficiently. Here we discuss the optical characteristics of ultra-black Nickel–Phosphorus (Ni–P) and its relations with the surface morphology. The ultra-black Ni–P has important unique properties such as low reflectance and uniformity of deposition in complex geometries. Ni–P multilayer was deposited by electroless on aluminum substrates. The surface was etched by oxidizing acid to produce ultra-black Ni–P. Characterization techniques were used to describe the properties of the material. We describe the directional reflectance employing the bidirectional reflectance distribution function. Additionally, we used reflectance maps to show the influence of the pores on the reflectance. Ultra-black Ni–P exhibited a high absorptance and dependence with the light incidence angle. Based on the results, the material demonstrated the opportunity of many terrestrial and space applications as a black coating absorber.
26 March 2018 in Revista Brasileira de Ensino de Física
Resumo A radiação solar ou irradiância constitui um importante fator que influencia os processos químicos, físicos e biológicos na Terra. Essa radiação emitida por diferentes camadas da atmosfera solar afeta a atmosfera superior e também o clima da Terra. Neste artigo serão descritos os conceitos físicos sobre a irradiância total e irradiância espectral. Essas medidas são fundamentais para a modelagem do clima da Terra. Também alguns modelos utilizados são descritos. A relação entre a irradiância solar e o clima da Terra será discutido.
Absolute radiometers are based on electrical substitution radiometers, which compare optical and electrical power. The same physical principle applies to standard reference detectors operating at cryogenic temperatures and room temperature radiometers for total solar irradiance (TSI) measurements. Both types rely on the cavity with an internal low-reflectance coating to absorb incident radiation similar to a black body. The cavity shape design requires an analysis of the coating reflection properties. Like many materials, ultra-black Ni-P exhibits a mixture of diffuse and specular reflection that depends on the angle of incidence of light in the pores. We employed ray-tracing software to study the impact of the geometry on the absorptivity and distribution of the scattered rays. We describe the scattering model of the black coating in terms of the bidirectional reflectance distribution function. Also, we examined the difficulties of Ni-P electroless deposition and blackening inside the cavity. The measured absorptance of the cavity showed some discrepancies of the simulated absorptance mostly probably due to Ni-P non-uniformity coating.
Membrane performance is decreased by fouling, reducing permeate flux and membrane lifespan. This paper assesses ultrafiltration of a model textile effluent assisted by permanent magnetic field as an alternative to improve the water permeability recovery. Ultrafiltration was performed in a tangential module and model solutions, composed of carboxymethylcellulose (CMC) and sodium sulphate (Na2SO4). The feed was permeated through 30 kDa polysulphone membrane with and without the presence of a permanent magnetic field of 0.41 T, perpendicular to the membrane surface. Magnetic induction (MI) of feed solution was also investigated by recirculation of the feed stream through the magnetic field for 3 h. The increase in feed concentration did not affect permeate flux, while the presence of salt resulted in a severe flux decline. Effective water permeability recovery was obtained when the magnetic field was applied in the ultrafiltration process, although the MI of the CMC and Na2SO4 solutions also caused some enhancement in permeability recovery. Scanning electron microscopy images showed differences between the assays done with and without the presence of magnetic field. The magnetic field application in ultrafiltration of CMC and Na2SO4 solutions has proved to be an attractive alternative for improving the permeability recovery.
Long and reliable total solar irradiance (TSI) time series is one of the essential parameters for understanding solar contributions to climate change. The minor fluctuations of TSI in long timescales could impact the energy balance. Despite the improvement of accurate measurements provided by the instruments, at the time, long-term TSI variability and its effects had not been established. The space-borne radiometer era provided observations in short timescales from minutes to years. Therefore, this study presents an overview of irradiance observations, highlighting the importance of following its variability in different time scales. In this context, the Galileo Solar Space Telescope that has been developed by the Institute for Space Research (INPE), Brazil, includes the Irradiance Monitor Module with a radiometer cavity like the classical design and a next-generation compact radiometer.
23 February 2021 in Journal of Solar Energy Engineering
The study of solar radiation in space has become something necessary, motivating the launch of radiometers on board satellites dedicated to perform total solar irradiance (TSI) measurements and to build a record of their behavior over the years, thus making these data essential for meteorology and climatology. In this study, we propose a simplified model to understand the thermal behavior of absolute radiometers, which are used in this type of measurement. The model considers the heat transfer among parts through conduction and loss only by radiation since the instrument operates in a space environment. The goal is to understand how each component interferes with sensitivity and response time of the instrument depending on its design, material, volume, and thermal contact. The model was applied to data generated by a prototype for validation.