Silver is a low‐cost candidate electrode material for perovskite solar cells. However, in such cells the silver electrodes turn yellow within days of device fabrication. The color change is also accompanied by a dramatic decrease in the power conversion efficiency when compared to otherwise identical devices using gold electrodes. Here, it is shown that the color change results from silver oxidation to silver iodide, due to a reaction with iodine in methyl ammonium lead perovskite. The change in X‐ray diffraction and X‐ray photo­electron spectroscopy is discussed. Exposure to air accelerates corrosion of the Ag electrodes when compared to dry nitrogen gas exposure. However, iodine not reacted with silver is observed by X‐ray photoelectron spectroscopy even for the perovskite solar cell kept in dry nitrogen gas. It is proposed that silver iodide is formed when methyl ammonium iodide migration is facilitated by the small pinholes in the hole transport layer spiro‐MeOTAD.

Organometal halide based perovskites are promising materials for solar cell applications and are rapidly developing with current devices reaching ∼19% efficiency. In this work we introduce a new method of perovskite synthesis by hybrid chemical vapor deposition (HCVD), and demonstrate efficiencies as high as 11.8%. These cells were found to be stable with time, and retained almost the same efficiency after approximately 1100 h storage in dry N₂ gas. This method is particularly attractive because of its ability to scale up to industrial levels and the ability to precisely control gas flow rate, temperature, and pressure with high reproducibility. This is the first demonstration of a perovskite solar cell using chemical vapor deposition and there is likely still room for significant optimization in efficiency.

The use of a solid hole transport layer (HTL) was transformational for the recent perovskite solar cell (PSC) revolution in solar energy technology. Often high efficiency PSC devices employ heavily doped hole transport materials such as spiro-MeOTAD. Independent of HTL chemistry, lithium-bis-trifluoromethanesulfonyl-imide (LiTFSI) and tert-butylpyridine (TBP) are commonly used as additives in HTL formulations for PSCs. LiTFSI and TBP were originally optimized for dye-sensitized solar cells, where their roles have been extensively studied. However, in the case of PSCs, the function of TBP is not clearly understood. In this study, properties of the HTL composite deposited on flat silicon substrates were systematically measured at several length scales, e.g., macroscopically (profilometry, 4-point probe conductivity, and thermogravimetry-differential thermal analysis), microscopically, and at the nanoscale to investigate film morphology, conductivity, and dopant distribution. Microscopic distributions of spiro-MeOTAD, LiTFSI, and TBP were determined using 2D Fourier transform infrared (FTIR) microscopy and electrostatic atomic force microscopy (EFM). Our findings reveal that the main role of TBP is to prevent phase segregation of LiTFSI and spiro-MeOTAD, resulting in a homogeneous hole transport layer. These properties are critical for charge transport in the HTL bulk film as well as at the perovskite/HTL and HTL/electrode interfaces and for efficient solar cell performance.

Vapor based methods provide a promising alternative way to fabricate organometal halide perovskite solar cells.