The problem of leader-follower formation of a platoon of differential-drive wheeled mobile robots without using attitude measurements is addressed in this paper. Contrary to the position-distance approaches existing in the literature, the formation and collision avoidance is achieved by introducing a state-dependent delay in the desired trajectory. The delay is obtained as the output of a dynamical system and its magnitude will decrease/increase depending on the distance between the robots. To guarantee trajectory tracking and to overcome the lack of orientation measurements, an output feedback control and attitude observer are proposed based on the kinematic model of the robots. The attitude observer is designed directly on the special orthogonal group and it can be used in open-loop schemes. The proposed control-observer scheme ensures asymptotic convergence of the tracking and observer errors. Finally, experimental results are presented to show the performance of the proposed approach.
4 February 2021 in International Journal of Adaptive Control and Signal Processing
Grasping and manipulation are common robotic tasks which require to properly control the interaction forces and position of multiple robots end‐effectors. In this study, the authors focus on the problem of dexterous manipulation of rigid objects by means of a cooperative robotic system. Unlike several works, they consider the more complex case when the manipulated object is not mechanically attached to the robots' end‐effectors. In addition, they address the control problem of designing a control law with continuous and bounded input torques for cooperative robots in constrained motion. To guarantee a stable grasp and a fine manipulation a centralised control algorithm based on the Orthogonalisation principle and a dynamic sliding mode control is proposed. The control algorithm does not require the knowledge of the dynamic model of the robot manipulators and manipulated object for implementation. Experimental results are presented to show the good performance of the proposed controller. In addition, the stability analysis of the closed‐loop dynamics is developed.