The harmonic reducer, with its advantages of high precision, low noise, light weight, and high speed ratio, has been widely used in aerospace solar wing deployment mechanisms, antenna pointing mechanisms, robot joints, and other precision transmission fields. Accurately predicting the performance of the harmonic reducer under various application conditions is of great significance to the high reliability and long life of the harmonic reducer. In this paper, a set of automatic harmonic reducer performance test systems is designed. By using the CANOpen bus interface to control the servo motor as the drive motor, through accurately controlling the motor speed and rotation angle, collecting the angle, torque, and current in real time, the life cycle test of space harmonic reducer was carried out in high vacuum and low temperature environment on the ground. Then, the collected data were automatically analyzed and calculated. The test data of the transmission accuracy, backlash, and transmission efficiency of the space harmonic reducer were obtained. It is proven by experiments that the performance data of the harmonic reducer in space work can be more accurately obtained by using the test system mentioned in this paper, which is convenient for further research on related lubricating materials.
The two-dimensional material graphene has many excellent physicochemical properties such as large specific surface area, high electron migration rate, good chemical properties, good thermal conductivity, high elastic modulus and mechanical strength that make it very valuable for theoretical research and application in the preparation of graphene/polymer composites. In this paper, the effects of ultrasonic intensity and reaction time on the molecular weight and yield of PMMA under supercritical CO2 conditions were investigated. It was found that there are threshold and optimal values of ultrasonic intensity for initiating the reaction in supercritical CO2 system. The threshold value is 150 W/cm2 and the optimal ultrasonic intensity value is 225 W/cm2. There is also an optimal value of ultrasonic initiation time for ultrasonic initiation polymerization. Combining the reaction yield and the molecular weight of the product, 2 h of ultrasonic initiation is a suitable initiation reaction time. Based on the synthesis of PMMA by ultrasonic excitation, the preparation of Graphene/PMMA composites by ultrasound assistance was also investigated. The TG and DTG characterization of PMMA and complex materials prepared by ultrasonic excitation showed that the radicals generated by ultrasonic excitation were uniformly distributed and did not generate unsaturated double bonded polymers. The electrical conductivity of the Graphene/PMMA composites prepared by ultrasonic excitation at a graphene content of 1 wt% increased to 1.13 × 10-1 S/cm, which is better than that of the Graphene/PMMA prepared by in situ polymerization. This may be attributed to the ultrasound-assisted supercritical CO2 fluid action that resulted in a more uniform distribution of Graphene mixed with PMMA in the prepared composites. Therefore, it is of important practical significance for the preparation of Graphene/PMMA composites by ultrasound-induced polymerization.