Accurate pulmonary nodule detection is a crucial step in lung cancer screening. Computer-aided detection (CAD) systems are not routinely used by radiologists for pulmonary nodule detection in clinical practice despite their potential benefits. Maximum intensity projection (MIP) images improve the detection of pulmonary nodules in radiological evaluation with computed tomography (CT) scans. Inspired by the clinical methodology of radiologists, we aim to explore the feasibility of applying MIP images to improve the effectiveness of automatic lung nodule detection using convolutional neural networks (CNNs). We propose a CNN-based approach that takes MIP images of different slab thicknesses (5 mm, 10 mm, 15 mm) and 1 mm axial section slices as input. Such an approach augments the two-dimensional (2-D) CT slice images with more representative spatial information that helps discriminate nodules from vessels through their morphologies. Our proposed method achieves sensitivity of 92.7% with 1 false positive per scan and sensitivity of 94.2% with 2 false positives per scan for lung nodule detection on 888 scans in the LIDC-IDRI dataset. The use of thick MIP images helps the detection of small pulmonary nodules (3 mm-10 mm) and results in fewer false positives. Experimental results show that utilizing MIP images can increase the sensitivity and lower the number of false positives, which demonstrates the effectiveness and significance of the proposed MIP-based CNNs framework for automatic pulmonary nodule detection in CT scans. The proposed method also shows the potential that CNNs could gain benefits for nodule detection by combining the clinical procedure.

Segmentation of mandibular bone in CT scans is crucial for 3D virtual surgical planning of craniofacial tumor resection and free flap reconstruction of the resection defect, in order to obtain a detailed surface representation of the bones. A major drawback of most existing mandibular segmentation methods is that they require a large amount of expert knowledge for manual or partially automatic segmentation. In fact, due to the lack of experienced doctors and experts, high quality expert knowledge is hard to achieve in practice. Furthermore, segmentation of mandibles in CT scans is influenced seriously by metal artifacts and large variations in their shape and size among individuals. In order to address these challenges we propose an automatic mandible segmentation approach in CT scans, which considers the continuum of anatomical structures through different planes. The approach adopts the architecture of the U-Net and then combines the resulting 2D segmentations from three orthogonal planes into a 3D segmentation. We implement such a segmentation approach on two head and neck datasets and then evaluate the performance. Experimental results show that our proposed approach for mandible segmentation in CT scans exhibits high accuracy.

Medical imaging techniques, such as (cone beam) computed tomography and magnetic resonance imaging, have proven to be a valuable component for oral and maxillofacial surgery (OMFS). Accurate segmentation of the mandible from head and neck (H&N) scans is an important step in order to build a personalized 3D digital mandible model for 3D printing and treatment planning of OMFS. Segmented mandible structures are used to effectively visualize the mandible volumes and to evaluate particular mandible properties quantitatively. However, mandible segmentation is always challenging for both clinicians and researchers, due to complex structures and higher attenuation materials, such as teeth (filling) or metal implants that easily lead to high noise and strong artifacts during scanning. Moreover, the size and shape of the mandible vary to a large extent between individuals. Therefore, mandible segmentation is a tedious and time-consuming task and requires adequate training to be performed properly. With the advancement of computer vision approaches, researchers have developed several algorithms to automatically segment the mandible during the last two decades. The objective of this review was to present the available fully (semi)automatic segmentation methods of the mandible published in different scientific articles. This review provides a vivid description of the scientific advancements to clinicians and researchers in this field to help develop novel automatic methods for clinical applications.

Lung cancer, chronic obstructive pulmonary disease (COPD), and coronary artery disease (CAD) are expected to cause most deaths by 2050. State-of-the-art computed tomography (CT) allows early detection of lung cancer and simultaneous evaluation of imaging biomarkers for the early stages of COPD, based on pulmonary density and bronchial wall thickness, and of CAD, based on the coronary artery calcium score (CACS), at low radiation dose. To determine cut-off values for positive tests for elevated risk and presence of disease is one of the major tasks before considering implementation of CT screening in a general population. The ImaLife (Imaging in Lifelines) study, embedded in the Lifelines study, is designed to establish the reference values of the imaging biomarkers for the big three diseases in a well-defined general population aged 45 years and older. In total, 12,000 participants will undergo CACS and chest acquisitions with latest CT technology. The estimated percentage of individuals with lung nodules needing further workup is around 1–2%. Given the around 10% prevalence of COPD and CAD in the general population, the expected number of COPD and CAD is around 1000 each. So far, nearly 4000 participants have been included. The ImaLife study will allow differentiation between normal aging of the pulmonary and cardiovascular system and early stages of the big three diseases based on low-dose CT imaging. This information can be finally integrated into personalized precision health strategies in the general population.

Purpose: Classic encoder–decoder-based convolutional neural network (EDCNN) approaches cannot accurately segment detailed anatomical structures of the mandible in computed tomography (CT), for instance, condyles and coronoids of the mandible, which are often affected by noise and metal artifacts. The main reason is that EDCNN approaches ignore the anatomical connectivity of the organs. In this paper, we propose a novel CNN-based 3D mandible segmentation approach that has the ability to accurately segment detailed anatomical structures. Methods: Different from the classic EDCNNs that need to slice or crop the whole CT scan into 2D slices or 3D patches during the segmentation process, our proposed approach can perform mandible segmentation on complete 3D CT scans. The proposed method, namely, RCNNSeg, adopts the structure of the recurrent neural networks to form a directed acyclic graph in order to enable recurrent connections between adjacent nodes to retain their connectivity. Each node then functions as a classic EDCNN to segment a single slice in the CT scan. Our proposed approach can perform 3D mandible segmentation on sequential data of any varied lengths and does not require a large computation cost. The proposed RCNNSeg was evaluated on 109 head and neck CT scans from a local dataset and 40 scans from the PDDCA public dataset. The final accuracy of the proposed RCNNSeg was evaluated by calculating the Dice similarity coefficient (DSC), average symmetric surface distance (ASD), and $95\%$ Hausdorff distance (95HD) between the reference standard and the automated segmentation. Results: The proposed RCNNSeg outperforms the EDCNN-based approaches on both datasets and yields superior quantitative and qualitative performances when compared to the state-of-the-art approaches on the PDDCA dataset. The proposed RCNNSeg generated the most accurate segmentations with an average DSC of 97.48%, ASD of 0.2170 mm, and 95HD of 2.6562 mm on 109 CT scans, and an average DSC of 95.10%, ASD of 0.1367 mm, and 95HD of 1.3560 mm on the PDDCA dataset. Conclusions: The proposed RCNNSeg method generated more accurate automated segmentations than those of the other classic EDCNN segmentation techniques in terms of quantitative and qualitative evaluation. The proposed RCNNSeg has potential for automatic mandible segmentation by learning spatially structured information.

Glaucoma is a chronic progressive optic neuropathy that causes visual impairment or blindness if left untreated. It is crucial to diagnose it at an early stage in order to enable treatment. Fundus photography is a viable option for population-based screening. A fundus photograph enables the observation of the excavation of the optic disk—the hallmark of glaucoma. The excavation is quantified as a vertical cup-to-disk ratio (VCDR). The manual assessment of retinal fundus images is, however, time-consuming and costly. Thus, an automated system is necessary to assist human observers. We propose a computer-aided diagnosis system, which consists of the localization of the optic disk, the determination of the height of the optic disk and the cup, and the computation of the VCDR. We evaluated the performance of our approach on eight publicly available datasets, which have, in total, 1712 retinal fundus images. We compared the obtained VCDR values with those provided by an experienced ophthalmologist and achieved a weighted VCDR mean difference of 0.11. The system provides a reliable estimation of the height of the optic disk and the cup in terms of the relative height error (RHE = 0.08 and 0.09, respectively). The Bland–Altman analysis showed that the system achieves a good agreement with the manual annotations, especially for large VCDRs which indicate pathology.