Ali Omar Turky

Dr. Ali Omar Turky

CMRDI
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2017 in Physical Chemistry Chemical Physics
Verified
Journal Article
Closed access
PDF file
Ali Omar TurkyAli Omar Turky
Ali Omar Turky
Mohamed M. RashadMohamed M. Rashad
Mohamed M. Rashad
AHAli Mostafa Hassan
Ali Mostafa Hassan
EEElsayed M. Elnaggar
Elsayed M. Elnaggar
Mikhael BECHELANYMikhael BECHELANY
Mikhael BECHELANY
Generally, strontium-doped lanthanum manganites (LSM) are materials connected ordinarily as cathodes in the solid oxide fuel cell (SOFC). In this study, the structural, optical, electrical and magnetic properties of La1−xSrxMnO3 (x = 0.2, 0.5, 0.8) synthesized using an organic acid precursor strategy were investigated, based on using citric acid as a fuel. Evidently, the results disclosed that a pure single monoclinic LSM phase was obtained from the thermally treated precursors annealed at 1000 °C with an annealing time of 2 h. The microstructure of the formed sample relied on the Sr2+ ion content. Moreover, a good optical transparency of 45–60% in a wide range of wavelengths between 800 and 1800 nm for all samples substituted by Sr2+ ions was performed. The optical band gap energy was increased from 2.09 to 2.76 eV by increasing the Sr2+ ion molar ratios. The trend in the calculated refractive index, the high frequency dielectric constant (εα) and the static dielectric constant (ε0) of all the produced samples can be linked to an increase in the Sr2+ ion concentration. Moreover, the magnetic properties were enhanced with increasing Sr2+ ion content.

8 February 2016 in RSC Advances
Verified
Journal Article
Closed access
PDF file
Ali Omar TurkyAli Omar Turky
Ali Omar Turky
Mohamed M. RashadMohamed M. Rashad
Mohamed M. Rashad
AHAli Hassan
Ali Hassan
EEElsayed M. Elnaggar
Elsayed M. Elnaggar
MBMikhael Bechelany
Mikhael Bechelany
Lanthanum strontium manganite (LSM) nanopowders La1−xSrxMnO3 (x = 0.2, 0.5, 0.8) have been synthesized using the co-precipitation method based on methyl amine as a base at a pH value 12. The effect of Sr2+ ion concentration on the crystal structure, microstructure, optical, magnetic and the electrical properties was investigated. Typically, in all of the formed LSM powders, XRD revealed that a pure single perovskite LSM phase was obtained after annealing at 1000 °C for 2 h. This temperature was relatively low compared to what has been reported elsewhere. The microstructure of the produced LSM nanopowders depends on the Sr2+ concentration. The observations of these powders confirmed their rough surface. Meanwhile, the transmittance of the sample was around 40% for LSM with an Sr2+ ratio of 0.8. Furthermore, the band gap energy of this powder was 2.6 eV. The refractive index was decreased with an enhanced Sr2+ ion content. Indeed, the saturation magnetization of the LSM powders was increased on increasing the Sr2+ ion concentration. Electrochemical impedance spectroscopy (EIS) evinced that the electrode specific polarization resistance of the LSM samples was increased by increasing the Sr2+ ion concentration from 3.10 to 8.56 Ω cm2.


31 August 2017 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
Ali Omar TurkyAli Omar Turky
Ali Omar Turky
Ahmed BarhoumAhmed Barhoum
Ahmed Barhoum
MMMohamed MohamedRashad
Mohamed MohamedRashad
Mikhael BECHELANYMikhael BECHELANY
Mikhael BECHELANY

31 March 2015 in Physical Chemistry Chemical Physics
Verified
Journal Article
Closed access
PDF file
Ali Omar TurkyAli Omar Turky
Ali Omar Turky
Mohamed M. RashadMohamed M. Rashad
Mohamed M. Rashad
AKAbd El-Hakim Taha Kandil
Abd El-Hakim Taha Kandil
Mikhael BECHELANYMikhael BECHELANY
Mikhael BECHELANY
Monodispersed barium strontium titanate Ba0.5Sr0.5TiO3 nanopowders synthesized using the oxalate precursor route based on low cost starting materials.

22 January 2015 in RSC Advances
Verified
Journal Article
Closed access
PDF file
Ali Omar TurkyAli Omar Turky
Ali Omar Turky
Mohamed M. RashadMohamed M. Rashad
Mohamed M. Rashad
ZZZaki Ismail Zaki
Zaki Ismail Zaki
IIIbrahim Ahmed Ibrahim
Ibrahim Ahmed Ibrahim
Mikhael BECHELANYMikhael BECHELANY
Mikhael BECHELANY
Calcium copper titanate CaxCu3−xTi4O12 (CCTO) nanopowders have been synthesized using the organic acid precursor method based on commercially available materials. The results revealed that cubic CCTO phase was accomplished for the formed citrate precursors annealed at 1000 °C for 2 h. The crystallite size of the formed powders was found to increase from 44.2 to 64.8 nm upon increasing the molar ratio of Ca2+ ion from 1.0 to 2.0. A slight increase in the lattice parameter “a” and unit cell volume were observed, while a slight decrease in the porosity was evidenced as a result of increasing Ca2+ ion concentration. FE-SEM observations of these powders confirmed their homogeneous regular cubic-like structure. It can be noted that the transmittance of the sample was around 85% with Ca2+ ratio 1.0. Furthermore, the band gap energy increased from 3.8 to 4.2 eV, and the DC resistivity was increased from 6.4 × 104 to 6.8 × 104 cm Ω with increasing calcium content. We demonstrate that without any dopant, only by controlling the chemistry and engineering of the interfacial regions at the grain boundaries, the dielectric loss was suppressed remarkably while retaining the giant dielectric constant. These investigations would allow the application of these materials in transparency, microelectronics and memory devices.