An experimental and numerical investigation of the flow near a blunt body has been conducted in this study. Most experimental methods of flow studies use flow visualization and probes introduction into the flow field. The main goal of this research was the development of a new methodology to analyze flows, and to measure flow characteristics without taking into account the distorting effects of measuring probes. A series of experiments were performed on a ground surveillance radar in the Price-Païdoussis subsonic wind tunnel. Forces and moments were measured as functions of wind speeds and angular positions by the use of a six-component aerodynamic scale. A Computational Fluid Dynamics three-dimensional model was employed to analyze the wake region of the ground surveillance radar. A turbulence reduction system was proposed and analyzed in this research. The use of the proposed turbulence reduction system was found to be an effective way to reduce turbulent flow intensity by 50%, drag coefficients by 9.6%, and delay the flow transition point by 7.6 times.
New knowledge in multidisciplinary methodology is presented in this article for the design, aerodynamic optimization, and model validation of an adaptive wing prototype. The optimization framework integrates the design, the finite element analysis, and the model validation. A computational fluid dynamics model of the adaptive wing and the flow in its vicinity was developed and validated with experimental metrics, such as the lift, the drag, and the lift-to-drag ratio. A new genetic algorithm strategy was chosen to find the optimized airfoil shapes for the prototype’s upper surface. The reliability of the proposed methodology was investigated through the design, manufacture, and testing of a wing prototype proposed for the UAV S45. The experimental and simulated results have shown a low drag production and a high lift-to-drag ratio of the adaptive wing prototype that will translate into a reduction in fuel consumption and an increase in cruising flight range and therefore into climate improvement.