This paper investigates the effect of multiwalled carbon nanotubes on the mechanical and electrical properties of epoxy resins and epoxy composites. The research concerns multiwalled carbon nanotubes obtained by catalytic chemical vapor deposition, subjected to purification processes and covalent functionalization by depositing functional groups on their surfaces. The study included the analysis of the change in DC resistivity, tensile strength, strain, and Young’s modulus with the addition of carbon nanotubes in the range of 0 to 2.5 wt.%. The effect of agents intended to increase the affinity of the nanomaterial to the polymer on the aforementioned properties was also investigated. The addition of functionalized multiwalled carbon nanotubes allowed us to obtain electrically conductive materials. For all materials, the percolation threshold was obtained with 1% addition of multiwalled carbon nanotubes, and filling the polymer with a higher content of carbon nanotubes increased its conductivity. The use of carbon nanotubes as polymer reinforcement allows higher values of tensile strength and a higher strain percentage to be achieved. In contrast, Young’s modulus values did not increase significantly, and higher nanofiller percentages resulted in a drastic decrease in the values of the abovementioned properties.
In this paper we present a wearable biopotential measurement system with expanded data safety feature. The proposed solution combines dry electrodes as a biopotential interface and Bluetooth Low Energy (BLE) transmission which together with a pairing feature based on NFC aim to provide reliable yet safe data transfer. Electrodes were prepared as conductive pads made of composite with Multiwall Carbon Nanotubes (MWCNT) filler. Such a material is convenient for integration with textiles and provides required electrical properties. The main module of the system's electronic part is based on nRF52832 microcontroller with embedded BLE radio supporting Near Field Communication (NFC). The main focus of this paper is the development and testing of safety mechanisms in a short distance communication that can be implemented in medical data transfer.