Exposed rock masses in tunnel portals are susceptible to thermal deterioration in southern China, where temperatures are relatively high. The thermal stress field of rock masses is affected by fracture shape and distribution as fractures near the surface are channels for solar radiation energy to be converted into rock thermal energy. In this study, a function expression is developed for triangular heat sources of fractured rock masses in a tunnel portal in a high-temperature environment. By the function expression, the temperature field and thermal stress field are calculated, and the influence of fracture shape parameters and multi-fracture interaction is analyzed. The results are as follows: (1) the temperature field and thermal stress field of exposed rocks are redistributed by fractures. The internal temperature of the fractured rocks is higher than that of non-fractured rocks, and thermal stress near the fracture tip increases. (2) For triangular fractures of the same length, thermal stress increases as the apex angle increases. (3) When the spacing between parallel fractures or coplanar fractures is close, the superposition effect of thermal stress becomes significant. (4) In a high-temperature environment, temperature field and thermal stress field of a fractured rock are both nonlinear as temperature and thermal stress around fractures increase significantly. The results provide effective reference for stability evaluation of fractured rock masses in tunnel portals and offer theoretical foundation for thermal diseases analysis and protection measures of tunnel engineering in high-temperature environments of southern China.
15 March 2023 in Geotechnical and Geological Engineering
Composite foundations reinforced with rigid columns have been widely used as a ground-improvement technique in highway and railway embankments in China. In this study, plate load tests were performed on rigid column–reinforced composite foundations to investigate its load-bearing behavior and the mechanism of load transfer. Two design factors were considered in the study: column length and column spacing. Axial forces of columns as well as vertical stresses and settlement of soils were measured during the loading process. Results show that the upper section of columns together with surrounding soils played a dominant role in the load-bearing capacity of the composite foundation. A significant portion of settlement occurred in the soils within the depth of 0–2 m. With the increase in column spacing or column length, the share of load carried by column increased, but the overall load-bearing capacity of the composite foundation decreased. Negative friction may be generated when a large column spacing was used. Based on the results, proper column length and column spacing should be carefully selected to achieve an optimal overall bearing capacity of the composite foundation.