A compact four-port multiple-input multiple-output (MIMO) antenna for ultrawideband (UWB) applications is presented in this paper. The proposed antenna has four unit cell antennas. Each unit cell is placed orthogonal to its adjacent elements. The radiation element of each unit cell is composed of a cut semicircular patch and a stepped microstrip feed line. The whole ground on the back side consists of four parts of defective ground and their extended branches, which are connected through a “卍” structure. The main decoupling technology used in the MIMO antenna is polarization diversity. In addition, protruded ground and parasitic elements are added to achieve a higher isolation. This compact antenna has a small area of 45 mm × 45 mm and is printed on a single layer substrate (FR4) with an ε_r = 4.4 and a thickness of 1.6 mm. This antenna has an impedance bandwidth (S11 < −10 dB) of 3.1–13.1 GHz (123%) and an isolation of less than −17 dB. The envelope correction coefficient (ECC) is less than 0.02 and the average gain is 4 dBi. The ultrawide bandwidth and compact size of the proposed antenna make it a promising candidate for UWB applications.

The demand for high-speed wireless communication systems has led to the development of ultrawide-band (UWB) antennas with a compact size and high performance. In this paper, we propose a novel four-port multiple-input multiple-output (MIMO) antenna with an asymptote-shaped structure that overcomes the limitations of existing designs for UWB applications. The antenna elements are placed orthogonally to each other for polarization diversity, and each element features a stepped rectangular patch with a tapered microstrip feedline. The unique structure of the antenna significantly reduces its dimensions to 42 × 42 mm² ($0.43\lambda \times 0.43\lambda @ 3.09\mathrm{GHz}$), making it highly desirable for use in small wireless devices. To further enhance the antenna’s performance, we use two parasitic tapes on the ground plane at the back as decoupling structures between adjacent elements. The tapes are designed in a windmill shape and a rotating extended cross shape, respectively, to further improve the isolation. We fabricated and measured the proposed antenna design on a single-layer substrate (FR4) with a dielectric constant of 4.4 and a thickness of 1 mm. The measured results show that the impedance bandwidth of the antenna is 3.09–12 GHz, with an isolation of −16.4 dB, an envelope correlation coefficient (ECC) of 0.02, a diversity gain (DG) of 9.991 dB, an average total effective reflection coefficient (TARC) of −20 dB, an overall group delay value less than 1.4 ns, and a peak gain of 5.1 dBi. Although there may be some antennas that have better performance in one or two specific aspects, our proposed antenna has an excellent trade-off among all the antenna characteristics including bandwidth, size, and isolation. The proposed antenna also exhibits good quasi-omnidirectional radiation properties, making it well-suited for a range of emerging UWB-MIMO communication systems, particularly in small wireless devices. In summary, the compact size and ultrawide-band capabilities of the proposed MIMO antenna design, coupled with its improved performance compared to other recent UWB-MIMO designs, make it a promising candidate for 5G and next-generation wireless communication systems.

This paper proposes a real-time semantics-driven infrared and visible image fusion framework (RSDFusion). A novel semantics-driven image fusion strategy is introduced in image fusion to maximize the retention of significant information of the source image in the fusion image. First, a semantically segmented image of the source image is obtained using a pre-trained semantic segmentation model. Second, masks of significant targets are obtained from the semantically segmented image, and these masks are used to separate the targets in the source and fusion images. Finally, the local semantic loss of the separation target is designed and combined with the overall structural similarity loss of the image to instruct the network to extract appropriate features to reconstruct the fusion image. Experimental results show that the RSDFusion proposed in this paper outperformed other comparative methods on both subjective and objective evaluation of public datasets and that the main target of the source image is better preserved in the fusion image.

In this paper, a novel intrinsically switched tunable bandpass filter based on a dual-mode T-shaped varactor-loaded resonator is presented. The varactors loaded in the T-shaped resonator are capable of efficiently tuning the resonant frequencies of the even and odd modes, as well as the transmission-zero frequency. Without any additional RF switches, the passband of the filter can be intrinsically switched off by adjusting the transmission zero to the resonant frequencies. In the switch-on state, the constant absolute bandwidth (CABW) or constant fractional bandwidth (CFBW) passband can be achieved by controlling the frequency space between the two resonances. For a demonstration, a 0.8–1.1 GHz intrinsically switched tunable bandpass filter with 74 MHz CABW or 8.5% CFBW was fabricated and tested. In the whole operating band with |S₁₁| < 10 dB, the insertion losses for CABW and CFBW are better than 3.3 dB and 3 dB, respectively, and the isolations are better than 20 dB in the switch-off state. The measured results have a good agreement with simulated results, which verifies the design theory.

This letter proposes a multi-passband half-mode substrate integrated waveguide (HMSIW) filter based on the theory of odd and even mode analysis. The filter adopts a triangular HMSIW cavity cut along the diagonal of the rectangle. By etching two dual-mode resonators, the resonant mode of the HMSIW resonator is coupled with the odd-even mode of the dual-mode resonator to achieve multiple passbands. The defected ground structure (DGS) of the filter can reduce the resonance frequency of the HMSIW cavity without increasing the volume of the HMSIW cavity, making it easier to couple with the odd and even mode frequencies of the resonator. The input and output ports are directly coupled through a microstrip line. In this way, it adds an additional coupling path to the filter, which increases the out-of-band suppression without changing the performance in the passband, and improves the overall performance of the filter. To prove the feasibility of the above method, a multi-passband HMSIW filter was fabricated and tested. The center frequencies of the three passbands of the filter are 2.98 GHz, 4.78 GHz, and 6.62 GHz, respectively. The return loss in the passband is better than −15 dB, and the insertion loss is better than 2 dB. The measured results have a good agreement with the simulation results.

In this paper, a titled-beam antenna based on spoof surface plasmon polaritons (SSPPs) transmission lines (TLs) is proposed. The parallel SSPPs-TL is a slow-wave TL, which is able to limit waves in the TL strictly. By periodically introducing a set of tapered stubs along the SSPPs-TL, the backward endfire beams are formed by the surface waves in the slow-wave radiation region. Then, through the placement of a big metal plate below the endfire antenna, the backward endfire beams are tilted, and the tilted angle of the beams are steered by the distance of the metal plate and antenna. Over the band of 5.7 GHz~7.0 GHz, the tilted antenna performs constant shapes of radiation patterns. The gain keeps stable at around 12 dBi and the 1-dB gain bandwidth is 20%. The measured results of the fabricated prototypes confirm the design theory and simulated results.