Pawel Krol

Dr. Pawel Krol

Warsaw University of Technology, Faculty of Civil Engineering
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 June 2021 in Materials
Verified
Journal Article
Open access
PDF file
Pawel KrolPawel Krol
Pawel Krol
Marcin WachowskiMarcin Wachowski
Marcin Wachowski
In this study, the influence of different fire conditions on tempered 32CrB3 steel bolts of Grade 8.8 was investigated. In this research different temperatures, heating time, and cooling methods were correlated with the microstructure, hardness, and residual strength of the bolts. Chosen parameters of heat treatments correspond to simulated natural fire conditions that may occur in public facilities. Heat treated and unheated samples cut out from a series of tested bolts were subjected to microstructural tests using light microscopy (LM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), XRD phase analysis, and the quantitative analysis of the microstructure. The results of the microstructure tests were compared with the results of strength tests, including hardness and the ultimate residual tensile strength of the material (UTS) in the initial state and after the heat treatments. Results of the investigations revealed considerable microstructural changes in the bolt material as a result of exposing it to different fire conditions and cooling methods. A conducted comparative analysis also showed a significant effect of all such factors as the temperature level of the simulated fire, its duration, and the fire-fighting method on the mechanical properties of the bolts.

20 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
Rafal WyczolkowskiRafal Wyczolkowski
Rafal Wyczolkowski
Vazgen BagdasaryanVazgen Bagdasaryan
Vazgen Bagdasaryan
MGMarek Gała
Marek Gała
Pawel KrolPawel Krol
Pawel Krol
The paper presents chosen experimental and model methods of investigating heat transfer in a steel porous charge. The results of this investigation provide information on both the qualitative and quantitative course of the analysed processes of heat exchange. The parameters which characterise the analysed phenomenon in a quantitative manner, among others, are: The effective thermal conductivity kef, the thermal contact resistance Rct and Nusselt number Nu. It has been established that it is not possible to use literature models in order to determine the kef coefficient. The authors present their own model of effective thermal conductivity. The above-mentioned parameters for a porous charge reach the values within the following ranges: kef: 1.0–8.5 W/(m·K); Rct: 0.0019–0.0057 (m2⋅K)/W; Nu: 1.2–7.1.

13 May 2021 in Preprints.org
Verified
Preprint
Open access
Pawel KrolPawel Krol
Pawel Krol
Marcin WachowskiMarcin Wachowski
Marcin Wachowski
The article presents results of research consisting in an attempt to assess the influence of temperature, heating time and cooling method on microstructure and residual strength properties of steel previously tempered during the production process. Simulated environmental conditions to which high-strength bolts, commonly used in steel construction, were subjected, were intended to reflect conditions of a natural fire that may occur in public facilities where the obligation to ensure safety of users and rescue teams is of key importance, also required by law. Furthermore, the tests carried out also comprised a simulated effect of a rescue and firefighting operation using shock, rapid cooling of some of the heated bolts. Samples cut out from the tested bolts, after they were properly prepared, were subjected to microstructural tests using light microscopy, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), phase analysis with the use of an X-ray diffractometer (XRD) and quantitative analysis of the microstructure involving, inter alia, measuring the surface area of grains, their equivalent diameter and mean diameter. As a result of the tests, considerable microstructure changes were identified occurring in the bolt material as a result of exposing it to fire conditions, leading to a change in key, from the point of view of structural safety, mechanical properties. The results of the microstructure tests were compared with the results of previous strength tests, including hardness of the material after the heat treatment and the residual tensile strength of the material Rm. A conducted comparative analysis showed a significant effect of all such factors as the temperature level of the simulated fire, its duration and the fire-fighting method on the mechanical properties of bolts. Results obtained were provided with required comments and the concept of using the microstructure for the post-fire assessment of steel structures was referred to.

16 December 2016 in Periodica Polytechnica Civil Engineering
Verified
Journal Article
Closed access
Pawel KrolPawel Krol
Pawel Krol
The purpose of this article is to identify sources of uncertaintyand outline the basis of probabilistic safety assessmentof steel structures exposed to fire conditions. Awareness of theexistence of unavoidable uncertainties and non-deterministicnature of many phenomena and parameters may be essentialfor a proper understanding of the issues of structural reliabilityin the event of extreme or accidental actions.The study highlights various sources of uncertainty associatedwith practical fire safety assessment of steel structureswhich significantly affects the reliability of estimates. Universalfactors influencing random structural resistance in alldesign conditions were separately described. A significant partof the paper is devoted to issues that relate only to an accidentaldesign situation of fire. Reference was made to the uncertaintyof the analytical model describing the bearing capacityof the structure in terms of probabilistic approach. A syntheticsummary on the impact of the method of carrying out materialtesting in elevated temperatures on the strength parameters,was made. In the conclusion it has been underlined that, interalia, due to the lack of relevant statistical data, conducting afully reliable probabilistic analysis of random structural resistanceunder fire is currently not possible. A unique part of thepaper contains the proposed model of probability-based analyticalapproach to assess random structural resistance in fireconditions, incorporating an authorial modification to modelsused for standard conditions.

1 January 2014 in Procedia Engineering
Verified
Journal Article
Open access
Pawel KrolPawel Krol
Pawel Krol
MPMagdalena Papadopoulos-Woźniak
Magdalena Papadopoulos-Woźniak
JWJarosław Wójt
Jarosław Wójt

15 September 2021
Verified
Book Chapter
Closed access
PDF file
Pawel KrolPawel Krol
Pawel Krol
RJRadosław Jóźwik
Radosław Jóźwik