Amine-containing polyelectrolytes such as polyethyleneimine (PEI) are commonly used as cathode interfacial materials (CIMs); however, they are rarely found in non-fullerene acceptor (NFA) organic solar cells due to undesirable chemical reactions between PEI and NFAs. Unveiling the nature of these chemical interactions and developing chemically stable amine-containing polyelectrolytes is inevitable for achieving highly efficient and stable NFA organic solar cells. Herein, the reaction between PEI and 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (INCN)-based NFAs was investigated using a model system. 15N-isotope labeling experiments and 2D nuclear magnetic resonance (NMR) studies revealed that the products were generated by the Michael addition reaction and existed as the keto–enol tautomers. Based on the identified undesirable reaction, we developed a series of functionalized PEIs that are compatible with INCN-based NFAs by protecting the reactive amine functional groups. Highly efficient and stable NFA organic solar cells were successfully fabricated by the use of functionalized PEIs with broad work function tunability and improved chemical stability, which led to NFA organic solar cells with high power conversion efficiency (PCE) values of over 15% and thermally stable device operation for more than 360 hours at 100 °C.
29 April 2016 in Physical Chemistry Chemical Physics
A new series of D–A–D-type small-molecule photovoltaic donors are designed and virtually screened before synthesis using time-dependent density functional theory calculations carefully validated against various polymeric and molecular donors. In this series of new design, benzodithiophene is kept as D to achieve the optimum highest-occupied molecular orbital energy level, while thienopyrroledione is initially chosen as A but later replaced by difluorinated benzodiathiazole or its selenide derivative to achieve the optimum band gap. The D–A–D core is end-capped by pyridone units which could not only enhance their self-assembly via hydrogen bonds but also play a role as an acceptor (A′) to form an extended A′–D–A–D–A′ small-molecule donor.
The purpose of this study was to investigate the effect of the aliphatic moiety in the sulfonated poly(arylene ether sulfone) (SPAES) backbone. A new monomer (4,4’-dihydroxy-1,6-diphenoxyhexane) was synthesized and polymerized with other monomers to obtain partially alkylated SPAESs. According to differential scanning calorimetry analysis, the glass transition temperature (Tg) of these polymers ranged from 85 to 90 °C, which is 100 °C lower than that of the fully aromatic SPAES. Due to the low Tg values obtained for the partially alkylated SPAESs, it was possible to prepare a hydrocarbon electrolyte membrane-based membrane electrode assembly (MEA) with Nafion® binder in the electrode through the use of a decal transfer method, which is the most commercially suitable system to obtain an MEA of proton exchange membrane fuel cells (PEMFCs). A single cell prepared using this partially alkylated SPAES as an electrolyte membrane exhibited a peak power density of 539 mW cm−2.