In order to study the sugarcane cutting mechanism and the effects of influence factors on the sugarcane cutting quality (SCQ) of small sugarcane harvesters in hilly areas, sugarcane cutting experiments and simulations were done through a self-developed sugarcane harvester experiment platform (SHEP) and the finite element analysis (FEA) method. The comprehensive cutting quality evaluating value (CCQEV) was calculated through the number of sugarcane cracks, the crack thickness, and the crack length to evaluate the SCQ. Effects of the amplitude and the frequency of the axial cutter vibration, the cutter rotation velocity, the sugarcane feeding velocity, and the cutter installing angle on the CCQEV were studied. Effects of interaction between the amplitude and the frequency of the axial cutter vibration and that between the axial cutter vibration amplitude and the cutter rotation velocity on the CCQEV were also studied. The sugarcane cutting mechanism was studied through analysis of cutting force signals, the high-speed photographing result in the sugarcane cutting process, and FEA simulations of the sugarcane cutting process, which verified discoveries obtained through sugarcane cutting experiments. This research laid the foundation for the development of small sugarcane harvesters with a good SCQ in hilly areas.
23 June 2021 in Advances in Structural Engineering
With the increase of the arch bridge span, the mechanical properties of arch bridges will decrease rapidly. In order to solve this problem, triangular net is set between the arch rib and girder to form a kind of truss arch bridge in which arch rib acts as top chord, girder acts as lower chord, triangular net acts as web member, and hangers provide elastic restrains at several points. The triangle stability of the truss can improve linear stiffness of arch rib and girder, which will thus improve the mechanical properties of arch bridges. A test bridge with a span of 50 m was built to prove the superiority of the truss arch bridge with multi-point elastic constraints (MTAB). Structural stresses and displacements were obtained through dead load experiments, and the mechanical properties of the structure were calculated through the finite element (FE) software. It is turned out that, compared with the conventional through arch bridge (CTAB), the mechanical performance of the MTAB is greatly improved. The test values of structural stresses and displacements match calculation values well. Moreover, with the same steel consumption, the more layers of the triangular net, the better the mechanical properties of the structure.
The sugarcane harvester vibration has a bad effect on the sugarcane cutting quality. The effect of sugarcane field roughness on the sugarcane harvester vibration is much more significant than those of cutting forces and the engine. In order to simulate sugarcane field roughness, a simulated sugarcane field exciter (SSFE) was developed to actuate a self‐developed sugarcane harvester experiment platform (SHEP). The dynamics and the mathematical models of the SHEP were established. Simulations of the mathematical model show these two models are reasonable. The dynamic characteristic experiment of the SSFE shows it matches characteristics of sugarcane field roughness, but great lateral oscillations existed when it worked. Then the SSFE II was developed. The dynamic characteristic experiment of the SSFE II shows it matches characteristics of sugarcane field roughness and improves the SSFE. The modal test of the SHEP was done to further study dynamic characteristics of the SSFE II. With the SSFE II, simulated experiments of sugarcane harvesters under complete vibration causing conditions can be done in labs instead of sugarcane fields to avoid the low efficiency, poor security, and bad reliability during experiments in sugarcane fields.