The IEEE ``Tactile Internet'' (TI) Standards working group (WG), designated the numbering IEEE 1918.1, undertakes pioneering work on the development of standards for the TI. This paper describes the WG, its intentions, and its developing baseline standard and the associated reasoning behind that and touches on a further standard already initiated under its scope: IEEE 1918.1.1 on ``Haptic Codecs for the TI.'' IEEE 1918.1 and its baseline standard aim to set the framework and act as the foundations for the TI, thereby also serving as a basis for further standards developed on TI within the WG. This paper discusses the aspects of the framework such as its created TI architecture, including the elements, functions, interfaces, and other considerations therein, as well as the novel aspects and differentiating factors compared with, e.g., 5G Ultra-Reliable Low-Latency Communication, where it is noted that the TI will likely operate as an overlay on other networks or combinations of networks. Key foundations of the WG and its baseline standard are also highlighted, including the intended use cases and associated requirements that the standard must serve, and the TI's fundamental definition and assumptions as understood by the WG, among other aspects.

The tactile internet will enable a new range of capabilities to enable immersive remote operations and interactions with a physical world. Tactile internet use cases span over many fields, from remote operation of industrial applications in, e.g., hazardous environments, via remote-controlled driving in a fully automated intelligent transport system, to remote surgery where the unique expert skills can be delivered to different locations in the world. Fifth-generation (5G) communication will play a fundamental part in this tactile internet vision, as it will provide necessary capabilities for the demanding communication needs in terms of reliability and low latency, for operators or teleoperated systems that are connected wirelessly. This paper provides an overview of tactile internet services and haptic interactions and communication. The 5G functionality for ultrareliable and low-latency services is described in depth and it is shown how 5G new radio (NR) and the evolved long-term evolution (LTE) radio interface can achieve guaranteed low-latency wireless transmission. The costs for providing reliable and low-latency wireless transmission in terms of reduced spectral efficiency and coverage are discussed. The 5G system architecture with a software-based network design based on a distributed cloud platform is presented. It is shown how the 5G network is configured for tactile internet services via multidomain orchestration.

Wireless- and 5G-enabled industrial automation is expected to include a plethora of different applications with a wide variety of requirements. In this article, evaluations are undertaken for the deployment of 5G in realistic industrial production environments with realistic deployment settings. Both deployments using commercial 5G systems and a 5G prototype system including pre-commercial and standard compliant URLLC functionality have been investigated. Systematic latency and reliability measurements were performed, over the air and in live networks, for different packet sizes, different devices, and networks with different capabilities (at different sites) to characterize the expected performance. The results indicate that today’s 5G latency performance significantly depends on packet size, transmission direction (uplink or downlink), and network configuration as well as on the end device’s design and capabilities. Our over-the-air measurements also empirically show that 5G technology and future networks have the capability of providing one-way latency of around 1 ms in both uplink and downlink for the various packet sizes tested. It is concluded that the requirements for very low latencies can be achieved with high reliability guarantees, as required in some of the most stringent industrial IoT applications.

Over the last decade, society and industries are undergoing rapid digitization that is expected to lead to the evolution of the cyber-physical continuum. End-to-end deterministic communications infrastructure is the essential glue that will bridge the digital and physical worlds of the continuum. We describe the state of the art and open challenges with respect to contemporary deterministic communications and compute technologies— 3GPP 5G, IEEE Time-Sensitive Networking, IETF DetNet, OPC UA as well as edge computing. While these technologies represent significant technological advancements towards networking Cyber-Physical Systems (CPS), we argue in this paper that they rather represent a first generation of systems which are still limited in different dimensions. In contrast, realizing future deterministic communications systems requires, firstly, seamless convergence between these technologies and, secondly, scalability to support heterogeneous (time-varying requirements) arising from diverse CPS applications. In addition, future deterministic communication networks will have to provide such characteristics end-to-end , which for CPS refers to the entire communication and computation loop, from sensors to actuators. In this paper, we discuss the state of the art regarding the main challenges towards these goals: predictability, end-to-end technology integration, end-to-end security, and scalable vertical application interfacing. We then present our vision regarding viable approaches and technological enablers to overcome these four central challenges. In particular, we argue that there is currently a window of opportunity to establish, through 6G standardization, the foundations towards a scalable and converged deterministic communications and compute infrastructure. Key approaches to leverage in that regard are 6G system evolutions, wireless-friendly 6G integration with TSN and DetNet, novel end-to-end security approaches, efficient edge-cloud integrations, data-driven approaches for stochastic characterization and prediction, as well as leveraging digital twins towards system awareness.

The digitization of industries enables a rapid transformation from mass production to individualized manufacturing. Communication plays an essential role in this digital transformation; in particular, wireless communication enables a high degree of flexibility, dynamic interactions, and mobility support in production systems. This paper presents an implementation of a 5G system with Time-Sensitive Networking (TSN) and analyzes a typical industrial use case involving cloud-controlled mobile robots. A prototype setup integrating 5G in a TSN network has been completed to evaluate the 5G-TSN performance for industrial applications. The integrated 5G and TSN prototype has been evaluated with over the air tests in an industrial shopfloor using TSN features of traffic shaping and scheduling.