Unrestricted Travel in Solar Cells: In the past 2 years, organolead halide perovskites have emerged as a promising class of light-harvesting media in experimental solar cells, but the physical basis for their efficiency has been unclear (see the Perspective by Hodes ). Two studies now show, using a variety of time-resolved absorption and emission spectroscopic techniques, that these materials manifest relatively long diffusion paths for charge carriers energized by light absorption. Xing et al. (p. 344 ) independently assessed (negative) electron and (positive) hole diffusion lengths and found them well-matched to one another to the ~100-nanometer optical absorption depth. Stranks et al. (p. 341 ) uncovered a 10-fold greater diffusion length in a chloride-doped material, which correlates with the material's particularly efficient overall performance. Both studies highlight effective carrier diffusion as a fruitful parameter for further optimization.

This work reports a study into the origin of the high efficiency in solution-processable bilayer solar cells based on methylammonium lead iodide (CH₃NH₃PbI₃) and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PC₆₁BM). Our cell has a power conversion efficiency (PCE) of 5.2% under simulated AM 1.5G irradiation (100 mW cm⁻²) and an internal quantum efficiency of close to 100%, which means that nearly all the absorbed photons are converted to electrons and are efficiently collected at the electrodes. This implies that the exciton diffusion, charge transfer and charge collection are highly efficient. The high exciton diffusion efficiency is enabled by the long diffusion length of CH₃NH₃PbI₃ relative to its thickness. Furthermore, the low exciton binding energy of CH₃NH₃PbI₃ implies that exciton splitting at the CH₃NH₃PbI₃/PC₆₁BM interface is very efficient. With further increase in CH₃NH₃PbI₃ thickness, a higher PCE of 7.4% could be obtained. This is the highest efficiency attained for low temperature solution-processable bilayer solar cells to date.

This review provides an overview of factors affecting film morphology and how together with device architecture they impact perovskite cell performance.

A printable, all solid-state photo-supercapacitor (PSC) incorporating both organic photovoltaic (OPV) and supercapacitor (SC) functions has been demonstrated utilizing a single-walled carbon nanotube network, enabling a thinner (< 0.6 mm) and lighter (< 1 g) device architecture, which leads to a 43% reduction in device internal resistance as compared to external wire connected OPVs and SCs.