As a highly complex aqueous effluent, tannery wastewater from leather industry should be treated appropriately before discharging into the environment. Membrane technology has been shown to be a promising approach for tannery wastewater treatment as it may achieve “Zero Liquid Discharge (ZLD)”. This work, as the state-of-the-art, attempts to review the world-wide research trends of membrane technologies, the technical recapitulation and recent advances of such technology for tannery wastewater treatment. Generally, manufacture membrane, membrane-based integrated process, MBR, NF, UF and RO are the hotspots in this field. Details of different membrane technologies configured for tannery wastewater treatment, such as membrane materials, scale, membrane modules, operating conditions and removal efficiency of pollutants, are also summarized. It should be noted that membrane fouling is still a major challenge in the membrane technology during tannery wastewater treatment. Therefore, process coupling, either within diverse membrane technologies or between membrane and non-membrane technologies, is considered as a promising alternative to treat the leather tannery wastewater in the future. Graphical abstract
Daqu can be divided into artificially pressed daqu (A-Daqu) and mechanically pressed daqu (M-Daqu) based on pressing patterns. Here, we compared the discrepancies in physicochemical properties, volatile metabolites, and microbiota features between A-Daqu and M-Daqu during fermentation and further investigated the factors causing those differences. A-Daqu microbiota was characterized by six genera (e.g., Bacillus and Thermoactinomyces), while five genera (e.g., Bacillus and Thermomyces) dominated in M-Daqu. The flavor compounds analysis revealed that no obvious difference was observed in the type of esters between the two types of daqu, and M-Daqu was enriched with more alcohols. The factors related to differences between the two types of daqu were five genera (e.g., Hyphopichia). The functional prediction of microbial communities revealed that the functional discrepancies between the two types of daqu were mainly related to ethanol metabolism and 2,3-butanediol metabolism. This study provided a theoretical basis for understanding the heterogeneity of daqu due to the different pressing patterns.
Forward osmosis (FO) technology has a broad application prospect in the field of liquid food concentration because of the complete retention of flavor components and bioactive substances. Membrane fouling is the main obstacle affecting the FO performance and concentration efficiency. This work systematically investigated the membrane fouling behavior of the FO process for fruit juice concentration elucidated by the models of resistance-in-series, xDLVO theory and FTIR analysis. The results show that the AL-FS mode was more suitable for concentrating orange juice. Increasing the cross-flow rate and pretreatment of feed solutions can effectively improve the water flux and reduce the fouling resistance. The ATR-FTIR analysis revealed that the fouling layer of orange juice was mainly composed of proteins and polysaccharides, and the pretreatment of microfiltration can greatly reduce the content of the major foulant. There was an attractive interaction between the FO membrane and orange juice foulants; by eliminating those foulants, the microfiltration pretreatment then weakened such an attractive interaction and effectively prevented the fouling layer from growing, leading to a lower process resistance and, finally, resulting in a great improvement of concentration efficiency.
Ultrafiltration is a promising, environment-friendly alternative to the current physicochemical-based tannery wastewater treatment. In this work, ultrafiltration was employed to treat the tanning wastewater as an upstream process of the Zero Liquid Discharge (ZLD) system in the leather industry. The filtration efficiency and fouling behaviors were analyzed to assess the impact of membrane material and operating conditions (shear rate on the membrane surface and transmembrane pressure). The models of resistance-in-series, fouling propensity, and pore blocking were used to provide a comprehensive analysis of such a process. The results show that the process efficiency is strongly dependent on the operating conditions, while the membranes of either PES or PVDF showed similar filtration performance and fouling behavior. Reversible resistance was the main obstacle for such process. Cake formation was the main pore blocking mechanism during such process, which was independent on the operating conditions and membrane materials. The increase in shear rate significantly increased the steady-state permeation flux, thus, the filtration efficiency was improved, which resulted from both the reduction in reversible resistance and the slow-down of fouling layer accumulate rate. This is the first time that the fouling behaviors of tanning wastewater ultrafiltration were comprehensively evaluated, thus providing crucial guidance for further scientific investigation and industrial application.
Cigar is made of a typical fermented tobacco where the microbiota inhabits within an alkaline environment. Our current understanding on cigar fermentation is far from thorough. This work employed both high-throughput sequencing and chromatography-mass spectrometric technologies to provide new scientific reference for this specific fermented system. Typical cigar samples from different regions (the Caribbeans, South America, East Asia, and Southeast Asia) were investigated. The results show that Firmicutes, Actinobacteria, Proteobacteria, Ascomycota, and Basidiomycota were the predominant phyla in the cigar samples. Rather than the fungal community, it was the bacterial community structures that played vital roles to differentiate the cigar from different regions: Staphylococcus was the dominant genus in the Americas; Bacillus was the dominant genus in Southeast Asia; while in East Asia, there was no dominant genus. Such differences in community structure then affected the microflora metabolism. The correlation between microbiota and metabolites revealed that Aspergillaceae, Cercospora, and Staphylococcus were significantly correlated with sclareolide; Bacillus were positively associated with isophorone. Alcaligenaceae was significantly and positively correlated with L-nicotine and hexadecanoic acid, methyl ester. GRAPHICAL ABSTRACT
2 September 2024 in Applied Microbiology and Biotechnology
Roasted-rice leachate fermentation, a distinctive local tobacco fermentation method in Sichuan, imparts a mellow flavor and glossy texture to tobacco leave