Ping Li

Prof. Ping Li


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 April 2022 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
HZHuanhuan Zhang
Huanhuan Zhang
ZXZhao Sheng Xue
Zhao Sheng Xue
XLXin Yi Liu
Xin Yi Liu
PLPing Li
Ping Li
LJLi Jun Jiang
Li Jun Jiang
GSGuang Ming Shi
Guang Ming Shi
A deep genetic algorithm (GA) is proposed to optimize the high-speed channel for signal integrity. In the traditional genetic algorithm-based high-speed channel optimization method, the eye height and eye width of the eye diagram are obtained by eye diagram simulation based on the full-wave algorithm, which is computationally expensive. In this letter, a deep neural network (DNN) is trained to predict the eye diagram information corresponding to a set of given design parameters of the high-speed channel. This DNN is embedded into the genetic algorithm to carry out the evaluation operation, which can greatly accelerate the evaluation process. A high-speed channel model is constructed to demonstrate the optimization capability and the benefit of the proposed method.

2 August 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZWZi An Wang
Zi An Wang
ZXZhi Fei Xiao
Zhi Fei Xiao
JMJun Fa Mao
Jun Fa Mao
LJLi Jun Jiang
Li Jun Jiang
HBHakan Bagci
Hakan Bagci
PLPing Li
Ping Li
In this work, to characterize the radiated emission from electronic circuits in shielding enclosure, an improved electric dipole-based source reconstruction method (SRM) is developed. Moreover, by resorting to this reconstructed equivalent source, the estimation of electromagnetic interference (EMI) between different circuit modules in the enclosure can be conveniently and accurately evaluated. Different from the free-space SRM, the equivalent dipoles of the proposed SRM are directly placed over the shielding box enclosed circuit board, and the numerical Green’s function (NGF) is developed to bridge the connection between the equivalent dipoles and the planar scanned magnetic near-field. With the NGF strategy, the effects of surrounding environments (including the presence of substrate, ground plane, and shielding enclosure) are inclusively considered, which makes the proposed SRM valid for any complex EM environments in theory. Since the proposed SRM also has the capability of reproducing the radiated emission inside the shielding enclosure, it is critically helpful to evaluate the EMI between different circuit modules inside the shielding enclosure. To reach this aim, the Rayleigh-Carson Reciprocity theorem is referred, in which the original EM coupling problem is decomposed into the “forward problem” and “reverse problem.” A Huygens box enclosing the victim circuit module is built and the EM fields on the box are obtained using the reconstructed dipoles in both problems. Then the EMI can be calculated accordingly. Therefore, the novelty and merits of the proposed approach are threefold: 1) the physically-based equivalent dipole model considers the interactions between the radiation sources and the surrounding objects, leading to the accurate prediction of radiated emissions both outside and inside the enclosure; 2) due to the utilization of the NGF, there is no approximation involved in the solution of the dipole’s radiation, thus improving the calculation precision; and 3) the near-field coupling between multiple electronic circuit modules inside the shielding enclosure can be identified precisely, which is useful for diagnostics of radiation sources. The effectiveness of this algorithm is verified by representative numerical examples.

3 May 2019 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
YDYilin Dong
Yilin Dong
BZBinshan Zhao
Binshan Zhao
PLPing Li
Ping Li
JMJunfa Mao
Junfa Mao
In this paper, the transient electromagnetic–thermal simulation is performed for dispersive media using the discontinuous Galerkin time-domain (DGTD) method. Both the frequency-dependent and temperature-dependent properties of dispersive media are considered in the modeling. Instead of executing the complex convolution in the time domain, an auxiliary differential equation (ADE) method is employed to manipulate dispersive media, where the polarization current density is introduced as an auxiliary variable. While dealing with the thermal issue by the DGTD, the heat flux is utilized to construct the ADE for solving the thermal conduction equation. As the heat source in electromagnetic–thermal simulation, the transient power loss density for three typical dispersive media (Debye, Lorentz, and Drude) is derived by the electrodynamic approach and also explained with equivalent circuit models. The validity and accuracy of the proposed electromagnetic–thermal co-simulation method are demonstrated by the numerical examples.

1 March 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
WMWending Mai
Wending Mai
PLPing Li
Ping Li
HBHuaguang Bao
Huaguang Bao
XLXianjin Li
Xianjin Li
LJLi Jun Jiang
Li Jun Jiang
DWDouglas H. Werner
Douglas H. Werner
In this letter, we develop a prism-based discontinuous Galerkin time domain (DGTD) algorithm with simplified periodic boundary conditions (PBCs) to analyze infinite doubly-periodic frequency selective surfaces (FSS). Most FSS structures contain patterned planar conductive layers and supporting dielectric layers. These layers are very thin compared to the wavelength. Therefore, general tetrahedral discretization of space will unnecessarily increase the number of mesh elements, as well as the number of unknowns. Instead, we propose using prismatic elements, which are more optimal for planar structures, resulting in less unknowns, less memory usage and higher efficiency. The accuracy of the proposed prism-based DGTD method is verified by numerical examples compared with commercial software packages. Moreover, the CPU and memory costs are also compared, demonstrating clear advantages of the proposed prism-based DGTD method.

30 March 2020 in IEEE Journal on Multiscale and Multiphysics Computational Techniques
Verified
Journal Article
Open access
KNKaikun Niu
Kaikun Niu
PLPing Li
Ping Li
Zhixiang HuangZhixiang Huang
Zhixiang Huang
LJLi Jun Jiang
Li Jun Jiang
HBHakan Bagci
Hakan Bagci
Graphene's remarkable electrical, mechanical, thermal, and chemical properties have made this frontier of many other two-dimensional materials a focus of significant research interest in the last decade. Many theoretical studies of the physical mechanisms behind these properties have been followed by those investing the graphene's practical use in various fields of engineering. Electromagnetics, optics, and photonics are among these fields, where potential benefits of graphene in improving device/system performance have been studied. These studies are often carried out using simulation tools. To this end, many numerical methods have been developed to characterize electromagnetic field/wave interactions on graphene sheets and graphene-based devices. In this paper, most popular of these methods are reviewed and their advantages and disadvantages are discussed. Numerical examples are provided to demonstrate their applicability to real-life electromagnetic devices and systems.

13 April 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
KNKaikun Niu
Kaikun Niu
Zhixiang HuangZhixiang Huang
Zhixiang Huang
Xingang RenXingang Ren
Xingang Ren
KXKe Xu
Ke Xu
MLMinquan Li
Minquan Li
HBHakan Bagci
Hakan Bagci
We propose a stochastic hybrid implicit-explicit finitedifference time-domain method (S-HIE-FDTD) to compute the mean and variance of the electromagnetic fields using a single simulation, given those of the conductivity and permittivity in the computation domain. The mean and variance field update equations underlying the proposed method are derived from the field update equations of the “traditional” deterministic HIE-FDTD. The Courant-Friedrichs-Lewy condition of the S-HIE-FDTD depends on the spatial discretization sizes only in two dimensions, therefore for computation domains with fine geometric features only in the remaining dimension, it uses a time step size that is larger than that of fully explicit schemes. Indeed, numerical results demonstrate that the proposed method is faster than the previously developed stochastic FDTD in computing the mean and variance of the electromagnetic fields in two different problems: wave propagation through a multi-layer human tissue and transmission through a frequency selective surface.