This work considers the application of eco-friendly, biodegradable materials based on polylactide (PLA) and polyhydroxybutyrate (PHB), instead of conventional polymeric materials, in order to prevent further environmental endangerment by accumulation of synthetic petro-materials. This new approach to the topic is focused on analyzing the processing properties of blends without incorporating any additives that could have a harmful impact on human organisms, including the endocrine system. The main aim of the research was to find the best PLA/PHB ratio to obtain materials with desirable mechanical, processing and application properties. Therefore, two-component polymer blends were prepared by mixing different mass ratios of PLA and PHB (100/0, 50/10, 50/20, 40/30, 50/50, 30/40, 20/50, 10/50 and 0/100 mass ratio) using an extrusion process. The prepared blends were analyzed in terms of thermal and mechanical properties as well as miscibility and surface characteristics. Taking into account the test results, the PLA/PHB blend with a 50/10 ratio turned out to be most suitable in terms of mechanical and processing properties. This blend has the potential to become a bio-based and simultaneously biodegradable material safe for human health dedicated for the packaging industry.

The aim of the research was to obtain intelligent and eco-friendly packaging materials by incorporating innovative additives of plant origin. For this purpose, natural substances, including green tea extract (polyphenon 60) and caffeic acid, were added to two types of biodegradable thermoplastics (Ingeo™ Biopolymer PLA 4043D and Bioplast GS 2189). The main techniques used to assess the impact of phytocompounds on materials’ thermal properties were differential scanning calorimetry (DSC) and thermogravimetry (TGA), which confirmed the improved resistance to thermo-oxidation. Moreover, in order to assess the activity of applied antioxidants, the samples were aged using a UV aging chamber and a weathering device, then retested in terms of dynamic mechanical properties (DMA), colour changing, Vicat softening temperature, and chemical structure, as studied using FT-IR spectra analysis. The results revealed that different types of aging did not cause significant differences in thermo-mechanical properties and chemical structure of the samples with natural antioxidants but induced colour changing. The obtained results indicate that polylactide (PLA) and Bioplast GS 2189, the plasticizer free thermoplastic biomaterial containing polylactide and starch (referred to as sPLA in the present article), both with added caffeic acid and green tea extract, can be applied as smart and eco-friendly packaging materials. The composites reveal better thermo-oxidative stability with reference to pure materials and are able to change colour as a result of the oxidation process, especially after UV exposure, providing information about the degree of material degradation.

The aim of this research was to enhance thermal stability of aliphatic polyester blends via incorporation of selected natural antioxidants of plant origin. Thermal methods of analysis, including differential scanning calorimetry (DSC) and thermogravimetry (TGA), are significant tools for estimating the stabilization effect of polyphenols in a polymer matrix. Thermal stability was determined by analyzing thermogravimetric curves. Polymers with selected antioxidants degraded more slowly with rising temperature in comparison to reference samples without additives. This property was also confirmed by results obtained from differential scanning calorimetry (DSC), where the difference between the oxidation temperatures of pure material and polymer with natural stabilizers was observed. According to the results, the materials with selected antioxidants, including trans-chalcone, flavone and lignin have higher oxidation temperature than the pure ones, which confirms that chosen phytochemicals protect polymers from oxidation. Moreover, based on the colour change results or FT-IR spectra analysis, some of the selected antioxidants, including lignin and trans-chalcone, can be utilized as colorants or aging indicators. Taking into account the data obtained, naturally occurring antioxidants, including polyphenols, can be applied as versatile pro-ecological additives for biodegradable and bio-based aliphatic polyesters to obtain fully environmentally friendly materials dedicated for packaging industry.

Silica is a popular filler, but in epoxidized natural rubber, can act as a cross-linking agent. Unfortunately, a high amount of silica is necessary to obtain satisfactory tensile strength. Moreover, a high amount of silica in ENR/silica hybrids is associated with low elongation at break. In our paper, we propose natural phenolic compounds, including quercetin, tannic acid, and gallic acid as natural and safe additional crosslinkers dedicated to ENR/silica hybrids to obtain bio-elastomers with improved mechanical properties. Therefore, toxic crosslinkers, such as peroxides or harmful accelerators can be eliminated. The impact of selected natural phenolic compounds on crosslinking effect, mechanical properties, color, and chemical structure of ENR/silica composite have been analyzed. The obtained results indicated that only 3 phr of selected natural phenolic compounds is able to improve crosslinking effect as well as mechanical properties of ENR/silica hybrids. Moreover, some of the prepared materials tend to regain mechanical properties after reprocessing. Such materials containing only natural and safe ingredients have a chance of becoming novel elastomeric biomaterials dedicated to biomedical applications.

This research focuses on revealing the double role of quercetin accompanied by silica in epoxidized natural rubber. A crosslinking ability with antioxidative properties exists and reveals the dependence of these functions on quercetin content. Here, the aging resistance of self-healable biocomposites was analyzed. The self-healing properties were presented in our previous work. The stabilizing effect of quercetin applied as a crosslinking agent has been studied in epoxidized natural rubber with a 50 mol% of epoxidation (ENR-50). Some of five -OH moiety groups existing in the quercetin structure are able to react with epoxy rings of ENR-50 and cure this elastomer, whereas other free hydroxyl groups can donate the hydrogen molecule to a radical molecule, stabilizing it. The aging resistance of prepared composites was estimated by mechanical tests conducted before and after different types of aging, as well as by differences in color and surface energy between aged and un-aged samples. Changes within the oxygen function, which occurred as a result of the aging process, were observed using FT-IR absorbance spectroscopy. Furthermore, the impact of quercetin content on composites’ thermal stability was investigated by thermogravimetry (TGA). According to the results, a proper dose of quercetin can act as a crosslinker and antioxidant in ENR-50 at the same time.

This study presents a new approach to developing protective material structures for personal protective equipment (PPE), and in particular for protective gloves, with the use of ultrasonic and contact welding processes. The goal was to assess the quality of joints (welds) obtained between a synthetic polyamide knitted fabric (PA) and selected polymers (PLA, ABS, PET-G) in the developed materials using X-Ray microtomography (micro-CT). Quantitative and qualitative analyses were performed to determine the joint area produced by the selected welding methods for the examined materials. In this article, we assumed that obtaining a greater contact area seems to be the most promising from the point of view of future PPE utility tests characterizing protective glove structures. This research is a continuation of our previous study focused on functional 3D-printed polymeric materials for protective gloves.