The literature has shown that there is no consensus regarding the best resin composite photoactivation protocol. This study evaluated the efficiency of the conventional, soft-start, pulse-delay and exponential protocols for photoactivation of resin composites in reducing the shrinkage stress and temperature variation during the photopolymerisation. The photoactivation processes were performed using a photocuring unit and a smartphone app developed to control the irradiance according each photoactivation protocol. These photoactivation methods were evaluated applying photoactivation energies recommended by the resins manufactures. Three brands of resin composites were analysed: Z-250, Charisma and Ultrafill. The cure effectiveness was evaluated through depth of cure experiments. All results were statistically evaluated using one-way and multi-factor analysis of variance (ANOVA). The use of exponential and pulse-delay methods resulted in a significant reduction of the shrinkage stress for all evaluated resins; however, the pulse-delay method required too long a photoactivation time. The increases on the temperature were lower when the exponential photoactivation was applied; however, the temperature variation for all photoactivation protocols was not enough to cause damage in the restoration area. The evaluation of the depth of cure showed that all photoactivation protocols resulted in cured resins with equivalent hardness, indicating that the choice of an alternative photoactivation protocol did not harm the polymerisation. In this way, the results showed the exponential protocol as the best photoactivation technique for practical applications.

This study explores the chemical composition of different macrophyte species and infers their potential in extracting nutrients and some heavy metals from water as well as the use of macrophytes’ biomass as natural fertilizers. It used a dataset obtained from a previous study composed of 445 samples of chemical concentrations in the dried biomass of 16 macrophyte species collected from the Santana Reservoir in Rio de Janeiro, Brazil. Correlation tests, analysis of variance, and factor analysis of mixed data were performed to infer correspondences between the macrophyte species. The results showed that the macrophyte species can be grouped into three different clusters with significantly different profiles of chemical element concentrations (N, P, K⁺, Ca²⁺, Mg²⁺, S, B, Cu²⁺, Fe²⁺, Mn²⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ni²⁺, Pb²⁺) in their biomass (factorial map from PCA). Most marginal macrophytes have a lower concentration of chemical elements (ANOVA p-value < 0.05). Submerged and floating macrophyte species presented a higher concentration of metallic and non-metallic chemical elements in their biomass (ANOVA p-value < 0.05), revealing their potential in phytoremediation and the removal of toxic compounds (such as heavy metal molecules) from water. A cluster of macrophyte species also exhibited high concentrations of macronutrients and micronutrients (ANOVA p-value < 0.05), indicating their potential for use as soil fertilizers. These results reveal that the plant’s location in the reservoir (marginal, floating, or submerged) is a relevant feature associated with macrophytes’ ability to remove chemical components from the water. The obtained results can contribute to planning the management of macrophyte species in large water reservoirs.

ÍNDICE DE DESCONFORTO E ÍNDICE DE TEMPERATURA EFETIVA: UMA IMPLEMENTAÇÃO PARA SMARTPHONES E TABLETS.

ANÁLISE NO ACIONAMENTO DE MOTOBOMBAS ATRAVÉS DE SISTEMAS FOTOVOLTAICOS