The photovoltaic generation system (PGS) is considered a potential renewable energy harvesting system. However, the low conversion efficiency of PGS and maximum power point tracking (MPPT) technique are the main challenges that must be solved. In addition, the switching frequency of the converters employed also affects the MPPT system performance. A high gain voltage DC-DC converter is proposed to replace conventional power converter and fuzzy logic controller (FLC) is applied in the MPPT for optimizing solar energy harvesting system. Nevertheless, evaluation of suitable fuzzy membership function is needed for optimal MPPT technique of photovoltaic system. In this paper, FLC of MPPT for photovoltaic application system was built using various membership functions in MATLAB/Simulink environment. The switching frequency of the high gain voltage DC-DC converter is varied to test the robustness of the performance of each FLC membership function. The results showed that the FLC-based MPPT technique for high gain voltage DC-DC converter with GBell membership function type has the capability to track the maximum power point (MPP) accurately and to achieve optimum power conversion. Furthermore, GBell membership showed having stable and consistent performance at various switching frequencies.

Harvesting solar energy as a renewable energy source has received significant attention through serious studies that could be applied massively. However, the nonlinear nature of photovoltaic (PV) concerning the surrounding environment, especially irradiation and temperature, affects the resulting output. Therefore, the correlation between environmental parameters and PV's energy needs to be studied. This paper presents a design for measuring solar PV parameters monitored on a laboratory scale. The monitoring is based on internet of things (IoT) technology analyzed in realtime. The system was tested in various weather conditions for 18 hours. The results obtained indicate that the output voltage was influenced by the lighting factor of the PV and the surrounding temperature.

In the last decade, there has been a substantial surge in the advancement of research into the maximum power point tracking (MPPT) controller. The MPPT approaches, on the other hand, continue to be in high demand due to the ease and simplicity with which tracking techniques can be implemented on the maximum power point (MPP). Diverse MPPT approaches and their modifications from various literature are categorized and thoroughly explored in this work, which is divided into two sections. The discussions are centered on the primary goal of attaining the most extraordinary feasible MPPT technique that produces the best results at the lowest possible expense. In order to determine which MPPT approaches to use, evaluations from earlier literature are used to guide the decision. In this section, we will examine the evaluation of the MPPT technique in two sections. Previously, in Part I, we explored the MPPT techniques based on constant parameters and trial-and- error. Part II of this article will examine the MPPT technique, which is based on mathematical computation, measurement, and comparison, and the algorithm development that has occurred in recent years. Furthermore, this section’s assessment for selecting MPPT approaches is based on previous literature reviews. To aid with this selection, the following criteria for the MPPT approach are proposed: sensors and analog/digital requirements, costeffectiveness, simplicity, stability, efficiency, and tracking speed. This enables the reader to select the MPPT technique that is most appropriate for their application.

The development of research on the maximum power point tracking (MPPT) controller has increased significantly in this decade. The MPPT technique, however, is still demanding because of the ease and simplicity of implementing tracking technique on the maximum power point (MPP). In this paper, MPPT techniques and their modifications from various literature are classified and examined in detail. The discussions are focused on the main objective of obtaining the best possible MPPT technique with the best results at a low cost. The assessment for the selection of MPPT techniques is based on assessments from the previous literature. The discussion of the MPPT technique assessment is divided into two parts. In Part I, the MPPT technique based on constant parameters, and trial-and-error will be discussed in detail, along with its algorithm development in recent times.

Solar harvesting system with photovoltaic (PV) is one of the most desirable renewable energy sources because of its prominent advantages. However, low efficiency due to fluctuating output power is a major problem for PV systems. A technique used to maximize power extraction known as maximum power point tracking (MPPT) has been proposed by various literature to deal with this problem. One of the most widely developed MPPT methods due to its ease of implementation is perturb and observe (P&O). Since the initial discovery of the principle, the P&O method has been extensively modified including the fixed step-size: step-size variables, partial shading, threshold module current, three-point-comparison, maximization of dynamic performance, minimization of dynamic performance, bandwidth of 𝑃 − 𝑉 curve, decoupling, observation of 𝑑𝑉, 𝑑𝐼, and 𝑑𝑃, datasheet parameters, curve fitting, voltage hold P&O, and observation of 𝑑𝑉 and 𝑑𝑃. This paper presents the development of the P&O method from the initial principle to the end as a reference source for readers. The hope is that a new easy and robust P&O method as a complement to the implementation of the MPPT technique is developed in the solar harvesting system.