Acoustic metamaterials are materials with artificially designed structures, which have characteristics that surpass the behavior of natural materials, such as negative refraction, anomalous Doppler effect, plane focusing, etc. This article mainly introduces and summarizes the related research progress of acoustic metamaterials in the past two decades, focusing on meta-atomic acoustic metamaterials, metamolecular acoustic metamaterials, meta-atomic clusters and metamolecule cluster acoustic metamaterials. Finally, the research overview and development trend of acoustic metasurfaces are briefly introduced.
The effect of underwater radiated noise (URN) pollution (produced by merchant ships) on marine ecology has become a topic of extreme concern for both the academic community and the general public. This paper summarises some research results and modelling about shipping noise published over several decades, which comprises the research significance of low-frequency ambient noise and shipping noise, shipping noise source levels (SL), empirical models and the measurement standards of shipping noise. In short, we try to present an overall outline of shipping noise and ocean ambient noise for related research.
18 November 2022 in Arabian Journal for Science and Engineering
Compared to conventional materials, underwater metamaterials possess numerous advantages in the manipulation of sound waves, which have garnered increasing attention. In terms of composition, commonly studied underwater wideband metamaterials can be classified into solid-phase pentamode metafluid and water–solid coupling metafluid. The concept of multiphase design in pentamode metafluid allows for decoupling the regulation of equivalent density from that of the equivalent bulk modulus, facilitating more convenient structural design. In typical auxetic metamaterial structure designs, the “re-entrant” mechanism is commonly employed; the skeleton is inwardly bent to a certain extent, enabling the design of a low volume-modulus for each cell. Consequently, a novel type of water–solid coupling metafluid is devised by combining the concepts of “multiphase” and “re-entrant”. Firstly, a straight-sided skeleton (referred to as “ss” skeletal) unit cell is designed, and its compression wave frequency band is determined through analysis of its band characteristics and related vibration modes. Subsequently, the “re-entrant” (referred to as “re”) mechanism is introduced into a unit cell, revealing an increase in equivalent density while decreasing the equivalent volume modulus due to this feature. The bent skeleton provides lower bulk modulus, while multiphase (referred to as “mp”) counterweighting offers higher equivalent density; their combination enables designing more impedance-matched metafluid. Then, a unit cell is designed utilizing both “re” and “mp” characteristics. Finally, acoustic performance simulations and analyses verify that both types exhibit excellent broadband water-like properties within the frequency range of 5000–27,000 Hz. In order to further validate the reliability of the design concept, two pairs of underwater metafluid cells with an impedance-matching effect were subsequently developed, demonstrating sound speeds that are half and one-third that of water, respectively. The skeleton thickness of the “re” cell was moderately enhanced compared to that of the straight side cell, thereby presenting an innovative approach for designing robust underwater metafluid cells.
Based on the finite element method, this paper first discusses the sound absorption characteristics of acoustic materials with a cavity structure backed by air, and then takes the internal cavity of the acoustic material and the acoustic material as the research object, considering the sound waves of different frequencies and different incident angles. The maximum sound absorption coefficient is used as the objective function to optimize the design of the cavity acoustic material. The calculation results show that the sound absorption performance of the optimized acoustic material has been significantly improved.
A method of measuring the reflection coefficient for a double-layered scaled model using the inverse filter is presented. First, the response of the circuit and underwater acoustical channel is measured, and the retransmitted inverse signal isestimated with the least square method for solving the cost function, which is constructed by the inverse filtering theory. Then, by retransmitting the inverse signal, the incident signal at the position of the double-layered scaled model is focused with high-main-lobe resolution, low side-lobelevel and a narrow pulse signal in temporal domain. The focus improves the measurement accuracy of the reflection coefficient for the double-layered scaled model in low frequencies. The feasibility of replacing the whole cylindrical with the double-layered scaled model is verified by simulation. The validity of the proposed method is verified by experiments carried out in a cylindrical tank for a double-layered scaled model at the frequency 0.5 kHz~10 kHz. The experimental results show that the proposed method is effective to the measurement of the reflection coefficient for the double-layered scaled model.The experimental results for the double-layered scaled model with acoustical coating on different shells have strongly directive significance for the process design and improvement of the acoustical coating.