This paper presents the experimental results on the Terapia Oncologica con Protoni-Intensity Modulated Proton Linear Accelerator (TOP-IMPLART) beam that is currently accelerated up to 35 MeV, with a final target of 150 MeV. The TOP-IMPLART project, funded by the Innovation Department of Regione Lazio (Italy), is led by Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA) in collaboration with the Italian Institute of Health and the Oncological Hospital Regina Elena-IFO. The accelerator, under construction and test at ENEA-Frascati laboratories, employs a commercial 425 MHz, 7 MeV injector followed by a sequence of 3 GHz accelerating modules consisting of side coupled drift tube linac (SCDTL) structures up to 71 MeV and coupled cavity linac structures for higher energies. The section from 7 to 35 MeV, consisting on four SCDTL modules, is powered by a single 10 MW klystron and has been successfully commissioned. This result demonstrates the feasibility of a “fully linear” proton therapy accelerator operating at a high frequency and paves the way to a new class of machines in the field of cancer treatment.
Microorganisms often cause significant damage on historical objects. The archive or library materials as well as textile or leather artifacts suffer serious attacks that need appropriate care treatments. Several biocide processes have been implemented but often their application does not preserve the material of the good. The objective of this work is the disinfection through ionizing radiation of leather wallpaper from the museum building Palazzo Chigi in Ariccia (Rome, Italy). The controlled sterilization treatments were carried out using X-ray beams to eliminate the microorganisms present on the leather and maintaining unchanged the properties of the constituent material. Some fragments of decorated leather wallpaper, dating back to the 1700s, were irradiated with X-rays up to 5,000 Gy. The amount of microorganisms was evaluated by microbiological analysis before and after X-ray irradiation treatments to identify the dose that inhibits the bacterial load. It will be shown how the results obtained by the application of different chemical-physical techniques (Scanning Electron Microscopy, Fourier Transform Infrared spectroscopy and Light Transmission Analysis) have helped in the evaluation of the impact of the X-rays on leather chemical and physical integrity.