This paper studies the impact of metro train operation on the shield tunnel lining and its soft foundation. A complex elasto-plastic 3D dynamic finite difference model is used by fully considering the joints to show the dynamic response of the shield tunnel buried in soft soil under the vibrating load. The simulation result for joint was compared with the result when the joint was not considered. Through the formulation of computationally efficient numerical models, this paper examines the dynamic behaviour of these two particular types of lining structure. The differential Eq.s governing the vibration of a curved beam is discretized by the FLAC3D code. Numerical results demonstrate that an operating metro train induces significant dynamic response in the structure of the lining of the shield tunnel and its soft foundation. Of two horizontally symmetric the one near the joint is more severe in its dynamic response than that of the one far from the joint; the nearer the zone of the foundation soil to the lower half of the segment-ring, the more severe the dynamic response. The dynamic response influenced by joints is more severe than the response not influenced by joints, showing that the non-joint assumption is somewhat impractical.
Groundwater level monitoring is critical to the protection and management of groundwater resources. Properly designed and executed instrumentation can play an important role in increasing the quality and reliability of collected data and reducing total monitoring costs. The efficiency of the instrumentation depends mainly on the accuracy and reliability of the installed sensors. This study presents the testing and application of a cost-effective pressure sensor (0–689 kPa range) for water level monitoring based on microelectromechanical system (MEMS) technology and the internet of things concept. The sensor performance, in terms of accuracy, precision, repeatability, and temperature, was investigated in laboratory columns (with constant water level, increasing and decreasing water levels at various rates) and in situ conditions in an observation bore (with natural groundwater level fluctuations). The results show that the MEMS sensor is capable of providing a reliable and adequate monitoring scheme with an accuracy of 0.31% full scale (FS) (2.13 kPa).
5 June 2021 in Rock Mechanics and Rock Engineering