The introduction of an opening into a Reinforced Concrete (RC) beam leads to a reduction to both the beam’s stiffness and its overall structural capacity due to stress concentrations and local cracking around the opening. This paper uses both the experimental and finite element (FE) method to analyze the shear behavior of RC beams with opening. The shear span-to-depth ratios (av/d), opening size, and opening location were considered as the main parameters. The beams were divided into three series according to the shear span-to-depth ratios. Three reinforced concrete beams without openings and one beam with openings were tested experimentally under two-point loading. These beams were considered as control beams so as to validate the FE model using ANSYS14.5 software. A total of 31 specimens were analyzed using ANSYS14.5 while considering the above mentioned parameters. Results showed that the openings located in a high shear region (the line connecting the load and support points) led to the early collapse of the beam. In addition, by comparing the experimental results with those of the non-linear FE analysis, it was concluded that both results were in accordance. An analytical equation for predicting the shear strength of RC beams with circular openings was then proposed, and the obtained results later compared with those from FE model. Furthermore, the developed FE models can serve as a numerical platform for performance predictions of RC beams with different web opening geometries.
15 August 2016 in International Journal of Advanced Structural Engineering
The use of externally bonded fiber reinforced polymer (FRP) sheets, strips or steel plates is a modern and convenient way for strengthening of reinforced concrete (RC) beams. Several researches have been carried out on reinforced concrete beams with web openings that strengthened using fiber reinforced polymer composite. Majority of researches focused on shear strengthening compared with flexural strengthening, while others studied the effect of openings on shear and flexural separately with various loading. This paper investigates the impact of more than sixty articles on opening reinforced concrete beams with and without strengthening by fiber reinforcement polymers FRP. Moreover, important practical issues, which are contributed in shear strengthening of beams with different strengthening techniques, such as steel plate and FRP laminate, and detailed with various design approaches are discussed. Furthermore, a simple technique of applying fiber reinforced polymer contributed with steel plate for strengthening the RC beams with openings under different load application is concluded. Directions for future research based on the existing gaps of the present works are presented.
1 October 2012 in Journal of Performance of Constructed Facilities
This paper presents the integral lifting and seismic isolation retrofit of the great hall of Nanjing Museum, a 78-year-old cultural and historical building. Due to the need for extension, the great hall of the Nanjing Museum needed to be lifted 3.0 m. The total building area for lifting was 4,830 m2, with a total of 161 lifting points, which made this project quite challenging and also the largest done to date. Moreover, seismic isolation retrofit was utilized to improve the seismic performance of the translocated building. Details of the integral lifting and the seismic retrofit are presented in this paper, which include (1) the load underpinning system, (2) the spatial strengthening truss system, (3) the lifting control system, and (4) the base isolation using laminated rubber isolators. The entire lifting system performed well, and the main construction was finished within 5 months. Seismic time-history analyses were further performed to evaluate the effect of the seismic isolation. It was obse...
1 February 2022 in Asian Journal of Civil Engineering
Carbon fiber reinforcement polymer (CFRP) sheets are the most commonly materials that are used to strengthen reinforced concrete members due to high strength-to-weight ratio, excellent mechanical strength, and good fatigue properties. In this research program seven reinforced concrete beams were tested under four points loading with different shear span-to-depth ratios <!--mathContainer--> <!--Loading Mathjax--> , longitudinal and vertical reinforcement ratios. A numerical analysis using ANSYS software program was done by modeling 27 reinforced concrete beams with and without CFRP sheets. The beam dimensions, concrete strength, strengthening configuration of the CFRP sheets (full wrapped, U shape, and side bonding), and FRP thickness were considered as the main parameters of the numerical analysis. A comparison between the finite element (FE) results and the ACI standard code demonstrated the validity of the computational models in capturing the structural response of FRP contribution with variation varied from (10–16)%, (12–20)% and (13–19)% for full wrapping, U-jacketing, and side bonding, respectively. The finite element models were able to accurately predict the load capacities for the simulated RC beams strengthened in shear with CFRP composites. The results obtained using ANSYS finite element are relatively identical to the experimental ones, showing reasonable agreement with variation not more than 5% in all the specimens.
8 March 2017 in Journal of Adhesion Science and Technology
This paper presents a repairing technique of the steel plate that effectively strengthen RC members, control both the failure modes and the stress distribution around the beam chords and enhance the serviceability of pre-cracked RC beams with openings. Furthermore, to evaluate the usage of a temporary pre-stressed force that was applied on the RC beam so as to close all of the presence shear cracks before the steel plate application. Two un-strengthened control beams, five beams that were pre-cracked before the application of the steel plate, and one beam that was strengthened without pre-cracking were tested. Cracking was first induced, followed by repair using various strengthening technique, and then the beams were tested to failure. The advantages of the shear strengthening of RC beams that were obtained using this technique are based on the closing of all the existing cracks around the openings via epoxy injection. The results show that both the pre-existing damage level and the steel plate strengthening have a significant effect on strengthening effectiveness and failure mode at the ultimate strength. An analytical equation for predicting the shear strength of pre-damaged RC beams with circular openings was then proposed, and the obtained results later compared with those from the tests, results were in accordance.