This article presents an automated Sentinel-1-based processing chain designed for flood detection and monitoring in near-real-time (NRT). Since no user intervention is required at any stage of the flood mapping procedure, the processing chain allows deriving time-critical disaster information in less than 45 min after a new data set is available on the Sentinel Data Hub of the European Space Agency (ESA). Due to the systematic acquisition strategy and high repetition rate of Sentinel-1, the processing chain can be set up as a web-based service that regularly informs users about the current flood conditions in a given area of interest. The thematic accuracy of the thematic processor has been assessed for two test sites of a flood situation at the border between Greece and Turkey with encouraging overall accuracies between 94.0% and 96.1% and Cohen’s kappa coefficients (κ) ranging from 0.879 to 0.910. The accuracy assessment, which was performed separately for the standard polarizations (VV/VH) of the interferometric wide swath (IW) mode of Sentinel-1, further indicates that under calm wind conditions, slightly higher thematic accuracies can be achieved by using VV instead of VH polarization data.
20 March 2007 in Proceedings of the National Academy of Sciences
Losses of biodiversity and ecosystem functioning due to rainforest destruction and agricultural intensification are prime concerns for science and society alike. Potentially, ecosystems show nonlinear responses to land-use intensification that would open management options with limited ecological losses but satisfying economic gains. However, multidisciplinary studies to quantify ecological losses and socioeconomic tradeoffs under different management options are rare. Here, we evaluate opposing land use strategies in cacao agroforestry in Sulawesi, Indonesia, by using data on species richness of nine plant and animal taxa, six related ecosystem functions, and on socioeconomic drivers of agroforestry expansion. Expansion of cacao cultivation by 230% in the last two decades was triggered not only by economic market mechanisms, but also by rarely considered cultural factors. Transformation from near-primary forest to agroforestry had little effect on overall species richness, but reduced plant biomass and carbon storage by ≈75% and species richness of forest-using species by ≈60%. In contrast, increased land use intensity in cacao agroforestry, coupled with a reduction in shade tree cover from 80% to 40%, caused only minor quantitative changes in biodiversity and maintained high levels of ecosystem functioning while doubling farmers' net income. However, unshaded systems further increased income by ≈40%, implying that current economic incentives and cultural preferences for new intensification practices put shaded systems at risk. We conclude that low-shade agroforestry provides the best available compromise between economic forces and ecological needs. Certification schemes for shade-grown crops may provide a market-based mechanism to slow down current intensification trends.
1 June 2015 in ISPRS Journal of Photogrammetry and Remote Sensing
In recent years, the German Remote Sensing Data Center (DFD) of the German Aerospace Center (DLR) has gained a lot of experience in water surface extraction from synthetic aperture radar (SAR) data for various application domains. In this context, four approaches have been developed, which jointly form the so-called DFD Water Suite: The Water Mask Processor (WaMaPro) is based on a simple and high-performance algorithm that processes multi-sensor SAR data in order to provide decision-makers with information about the location of water surfaces. The Rapid Mapping of Flooding tool (RaMaFlood) has been developed for flood extent mapping using an interactive object-based classification algorithm. The TerraSAR-X Flood Service (TFS) is used for rapid mapping activities and provides satellite-derived information about the extent of floods in order to support emergency management authorities and decision-makers. It is based on a fully automated processing chain. The last approach is the TanDEM-X Water Indication Mask processor (TDX WAM). It is part of the processing chain for the generation of the seamless, accurate, and high-resolution global digital elevation model (DEM) produced based on data of the TanDEM-X mission. Its purpose is to support the subsequent DEM editing process by the generation of a global reference water mask. In this study, the design of the four approaches and their methodological backgrounds are explained in detail, while simultaneously elaborating on the preferred application domains for the different algorithms. The advantages and disadvantages of the four approaches are identified by qualitatively as well as quantitatively evaluating the water masks derived from data of the TanDEM-X mission for five test sites located in Vietnam, China, Germany, Mali, and the Netherlands.
3 August 2010 in IEEE Transactions on Geoscience and Remote Sensing
The near real-time provision of precise information about flood dynamics from synthetic aperture radar (SAR) data is an essential task in disaster management. A novel tile-based parametric thresholding approach under the generalized Gaussian assumption is applied on normalized change index data to automatically solve the three-class change detection problem in large-size images with small class a priori probabilities. The thresholding result is used for the initialization of a hybrid Markov model which integrates scale-dependent and spatiocontextual information into the labeling process by combining hierarchical with noncausal Markov image modeling. Hierarchical maximum a posteriori (HMAP) estimation using the Markov chains in scale, originally developed on quadtrees, is adapted to hierarchical irregular graphs. To reduce the computational effort of the iterative optimization process that is related to noncausal Markov models, a Markov random field (MRF) approach is defined, which is applied on a restricted region of the lowest level of the graph, selected according to the HMAP labeling result. The experiments that were performed on a bitemporal TerraSAR-X StripMap data set from South West England during and after a large-scale flooding in 2007 confirm the effectiveness of the proposed change detection method and show an increased classification accuracy of the hybrid MRF model in comparison to the sole application of the HMAP estimation. Additionally, the impact of the graph structure and the chosen model parameters on the labeling result as well as on the performance is discussed.
Mapping of landslides, quickly providing information about the extent of the affected area and type and grade of damage, is crucial to enable fast crisis response, i.e., to support rescue and humanitarian operations. Most synthetic aperture radar (SAR) data-based landslide detection approaches reported in the literature use change detection techniques, requiring very high resolution (VHR) SAR imagery acquired shortly before the landslide event, which is commonly not available. Modern VHR SAR missions, e.g., Radarsat-2, TerraSAR-X, or COSMO-SkyMed, do not systematically cover the entire world, due to limitations in onboard disk space and downlink transmission rates. Here, we present a fast and transferable procedure for mapping of landslides, based on change detection between pre-event optical imagery and the polarimetric entropy derived from post-event VHR polarimetric SAR data. Pre-event information is derived from high resolution optical imagery of Landsat-8 or Sentinel-2, which are freely available and systematically acquired over the entire Earth’s landmass. The landslide mapping is refined by slope information from a digital elevation model generated from bi-static TanDEM-X imagery. The methodology was successfully applied to two landslide events of different characteristics: A rotational slide near Charleston, West Virginia, USA and a mining waste earthflow near Bolshaya Talda, Russia.