The volatility of the cumulative displacement of landslides is related to the influence of external factors. To improve the prediction of nonlinear changes in landslide displacement caused by external influences, a new combined forecasting model of landslide displacement has been proposed. Variational modal decomposition (VMD) was used to obtain the trend and fluctuation sequences of the original sequence of landslide displacement. First, we established a stacked long short time memory (LSTM) network model and introduced rainfall and reservoir water levels as influencing factors to predict the fluctuation sequence; next, we used a threshold autoregressive (TAR) model to predict the trend sequence, following which the trend and fluctuation prediction sequence were superimposed to obtain the cumulative predicted displacement of the landslide. Finally, the VMD-stacked LSTM-TAR combination model based on the variational modal decomposition, stacked long short time memory network, and a threshold autoregressive model was built. Taking the landslide of Baishuihe in the Three Gorges Reservoir area as an example, through comparison with the prediction results of the VMD-recurrent neural network-TAR, VMD-back propagation neural network-TAR, and VMD-LSTM-TAR, the proposed combined prediction model was noted to have high accuracy, and it provided a novel approach for the prediction of volatile landslide displacement.
On 25 June 2020, a glacial lake outburst flood (GLOF) occurred in Jinwuco, Nidou Zangbo, and southeast Tibet, causing catastrophic damage to multiple infrastructures such as roads, bridges, and farmlands in the surrounding and downstream areas. Due to the lack of long-term monitoring of glacial lake and glacier changes in the region and the surrounding surface, the spatial and temporal evolutionary characteristics and triggering factors of the disaster still need to be determined. Here, we combine multi-temporal optical remote sensing image interpretation, surface deformation monitoring with synthetic aperture radar (SAR)/InSAR, meteorological observation data, and corresponding soil moisture change information to systematically analyze the spatial and temporal evolution characteristics and triggering factors of this GLOF disaster. Optical images taken between 1987 and 2020 indicate that the glacial lake’s initial area of 0.39 km2 quickly grew to 0.56 km2, then plummeted to 0.26 km2 after the catastrophe. Meanwhile, we found obvious signs of slippage beside the lateral moraine at the junction of the glacier’s terminus and the glacial lake. The pixel offset tracking (POT) results based on SAR images acquired before and after the disaster reveal that the western lateral moraine underwent a 40 m line of sight (LOS) deformation. The small baseline subset InSAR (SBAS-InSAR) results from 2017 to 2021 show that the cumulative deformation of the slope around the lateral moraine increased in the rainy season before the disaster, with a maximum cumulative deformation of −52 mm in 120 days and gradually stabilized after the disaster. However, there are three long-term deformation areas on the slope above it, showing an increasing trend after the disaster, with cumulative deformation exceeding −30 mm during the monitoring period. The lateral moraine collapse occurred in a warm climate with continuous and intense precipitation, and the low backscatter intensity prior to the slide suggests that the soil was very moist. Intense rainfall is thought to be the catalyst for lateral moraine collapse, whereas the lateral moraine falling into the glacier lake is the direct cause of the GLOF. This study shows that the joint active–passive remote sensing technique can accurately obtain the spatial and temporal evolution characteristics and triggering factors of GLOF. It is helpful to understand the GLOF event caused by the slide of lateral moraine more comprehensively, which is essential for further work related to glacial lake hazard assessment.
The measurement of atmospheric moisture content is essential for the monitoring of severe weather events and hydrological studies. This paper proposes a multivariate linear regression correction model that integrates elevation data with Global Navigation Satellite System (GNSS)-derived precipitable water vapor (PWV) to refine the water vapor content based on FY-4A satellite remote sensing data, thereby improving its accuracy. Taking Hong Kong as an experimental area, we investigated the correlation between GNSS PWV and FY-4A PWV, confirming the feasibility of utilizing GNSS PWV to calibrate FY-4A PWV. Subsequently, by examining the differences between the two PWV values, we found that the elevation of the stations affects the consistency of PWV measurement. Based on this finding, the elevation data are introduced to construct a multivariate linear regression correction model with a first-order polynomial. To evaluate the performance of the proposed model, a comparison with other correction models is made, including second-order polynomials and power functions. The results indicate that the elevation-integrated water vapor correction model improves the root mean square error (RMSE) by 27.4% and the MAE by 26.7%, and reduces the bias from 0.592 to nearly 0. Its accuracy surpasses that of second-order polynomial and power function models, demonstrating a considerable improvement in the precision of FY-4A.
Due to space environment interference, imperfect data processing model, and the performance of atomic clocks, real-time satellite clock products often contain outliers or irregular biases. We propose a real-time linear moving short-term prediction algorithm to predict clock offsets and detect abnormalities. The proposed algorithm mainly includes phase/frequency anomaly detection and real-time prediction part. Both the phase and frequency domains are used to detect abnormal clock offsets with previous epochs for building the clock prediction model accurately. The real-time moving prediction module utilizes the high short-term prediction performance to check the clock abnormality. The performance of the algorithm is then evaluated for all satellites with real-time estimated satellite clock offsets. To verify the feasibility and effectiveness of the proposed linear moving model and algorithm, the results of the grey model GM(1,1) and the ARIMA model are also compared. The experimental results indicated that the algorithm can detect clock outliers, frequency modulation, and phase jumps, and the linear model has a better clock performance improvement. After the abnormalities are removed with the proposed algorithm, the average STD accuracy of the real-time clock offsets for all satellites is improved by 15.5%, compared to an improvement of 11.4% by the GM(1,1) model and 11.5% by the ARIMA model. The PPP results demonstrate that the proposed clock prediction algorithm improves the positioning accuracy by 8.1%, 13.3%, and 16.9% in the east, north, and up components, respectively.
Linear combinations of triple-frequency help improve the performance of cycle slip detection for high-precision positioning using a single receiver; however, the position can be easily misjudged under ionospheric scintillation conditions or low sampling rates. We propose a method, which is developed specially for the datasets under ionospheric scintillation conditions or low sampling rates, to detect the triple-frequency cycle slips in real-time based on optimal linear combination coefficients and ionospheric range delay. Detection formulas are derived from the triple-frequency geometry-free code-phase combination, and ionospheric range delay is estimated by the wide lane combination. In addition, the principle used to select an optimal linear phase combination coefficient is derived, and the optimal linear coefficient suitable under high ionospheric activity conditions is provided. Finally, the data collected from self-build stations JYPS and NQ01 are used to test the performance of the method. The results demonstrate that the improved method can be used to detect all combinations of cycle slips in real-time, even under conditions of ionospheric scintillation or a sampling period exceeding 10 s.