The facile synthesis approach, surface-active properties, and anti-corrosive efficiency of innovative urea-based cationic fluorinated surfactants (FUS) of variable alkyl chain length were investigated. The effect of as-prepared FUS inhibitors on carbon steel corrosion in 15% HCl solution at 20–50 °C was examined using weight loss and various electrochemical methods (open circuit potential (OCP) vs. time, potentiodynamic polarization (PDA) and electrochemical impedance spectroscopy (EIS) methods). The corrosion protection capacities at an optimum concentration (0.5 mM) are 93.2% (FUS-8), 96.3% (FUS-10) and 97.6% (FUS-12) by PDA, comparable to the findings achieved by EIS. PDA measurements indicated that the studied FUS act as inhibitors of mixed-type and chemical adsorption on a carbon steel interface following the Langmuir isotherm model. The thermodynamic and kinetic indices of the corrosion and adsorption processes were estimated and interpreted. Surface examinations by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy and energy dispersive X-ray analysis (FESEM/EDX) revealed the formation of a protecting layer at the carbon steel/HCl interface. Quantum chemical indices (DFT based) delivered more understanding of the inhibition mechanism. Molecular dynamics (MD) simulations were accomplished to explore the configurational adsorption performance of the studied fluorosurfactants on the iron(110) interface. It is supposed that these findings are of some significance for the reasonable design of effective inhibitors for acidic corrosion.
In this work, three nanometal complexes named cetyltrimethyammonium dibromodichloro zincate (CT-Zn), cetyltrimethyammonium dibromodichloro cuprate (CT-Cu), and cetyltrimethyammonium dibromodichloro manganesate (CT-Mn) were prepared, characterized, and evaluated as corrosion inhibitors for carbon steel in water-based mud (WBM). The chemical structure of the prepared complexes was confirmed by the use of Fourier transform infrared spectroscopy, Raman spectroscopy, elemental analysis, atomic absorption spectroscopy, dynamic light scattering, and thermogravimetric analysis techniques. The surface tension of the complexes was measured. The critical micelle concentrations and some of the surface properties were also determined. The compounds were evaluated as corrosion inhibitors for carbon steel in the prepared WBM using potentiodynamic polarization and weight loss methods during the static and dynamic conditions of the drilling operations. The results indicated that the prepared metal complexes showed high anticorrosion action as the inhibition efficiency increased gradually with the increase in the concentrations of the prepared complexes until it reached the maximum value (93.1%) at 300 ppm for CT-Cu. The order of inhibition efficiency of these inhibitors was as follows: CT-Cu > CT-Zn > CT-Mn. The polarization curves showed that these complexes acted as mixed-type inhibitors. According to the results, the adsorption of these compounds obeyed Langmuir adsorption isotherm. Surface analysis of the carbon steel samples was investigated using scanning electron microscopy, energy dispersive X-ray, and X-ray diffraction techniques. Rheological properties, gel strength, thixotropy, and filtration properties were also measured according to American Petroleum Institute specifications.
Through our present study, three novel Gemini-fluorinated cationic surfactants bearing different spacers (FSG6-2, FSG6-4, and FSG6-6) were synthesized, and their structures were explained via different spectroscopic instruments such as 1H, 13C, and 19F NMR spectra. The surface activity of the as-prepared surfactants was examined. The inhibiting influence of FSG6 molecules on the X60 steel corrosion in the pickling solution (HCl) was examined by diverse methods comprising electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), and X-ray photoelectron spectroscopy (XPS) experimentations, and computational calculations. The inhibition effectiveness of FSG6 surfactants followed the order of 93.37% (FSG6-2) < 96.74% (FSG6-4) < 98.37% (FSG6-6) at 2.0 × 10−4 M. The FSG6 surfactants function as mixed-type inhibitors, according to PDP investigations. The H2O molecules that adsorbed on the steel interface were substituted with surfactant molecules, and the surfactant’s inhibitory activity is likely caused by the improvement in an adsorptive layer on the steel substrate, as specified by the EIS results. The Langmuir isotherm describes the absorption of FSG6 molecules on the metal surface. The XPS investigations validate the steel interface’s extremely protective nature. The mechanism of interaction between FSG6 molecules with an X60-steel employing the DFT calculations and MC simulations methods was also examined and discussed.