In the context in which severe visual impairment significantly affects human life, this article emphasizes the potential of Artificial Intelligence (AI) and Visible Light Communications (VLC) in developing future assistive technologies. Toward this path, the article summarizes the features of some commercial assistance solutions, and debates the characteristics of VLC and AI, emphasizing their compatibility with blind individuals’ needs. Additionally, this work highlights the AI potential in the efficient early detection of eye diseases. This article also reviews the existing work oriented toward VLC integration in blind persons’ assistive applications, showing the existing progress and emphasizing the high potential associated with VLC use. In the end, this work provides a roadmap toward the development of an integrated AI-based VLC assistance solution for visually impaired people, pointing out the high potential and some of the steps to follow. As far as we know, this is the first comprehensive work which focuses on the integration of AI and VLC technologies in visually impaired persons’ assistance domain.

The use of visible light communications technology in communication-based vehicle applications is gaining more and more interest as the research community is constantly overcoming challenge after challenge. In this context, this article addresses the issues associated with the use of Visible Light Communications (VLC) technology in Vehicle-to-Vehicle (V2V) communications, while focusing on two crucial issues. On the one hand, it aims to investigate the achievable communication distance in V2V applications while addressing the least favorable case, namely the one when a standard vehicle rear lighting system is used as a VLC emitter. On the other hand, this article investigates another highly unfavorable use case scenario, i.e., the case when two vehicles are located on adjacent lanes, rather than on the same lane. In order to evaluate the compatibility of the VLC technology with the usage in inter-vehicle communication, a VLC prototype is intensively evaluated in outdoor conditions. The experimental results show a record V2V VLC distance of 75 m, while providing a Bit Error Ratio (BER) of 10⁻⁷–10⁻⁶. The results also show that the VLC technology is able to provide V2V connectivity even in a situation where the vehicles are located on adjacent lanes, without a major impact on the link performances. Nevertheless, this situation generates an initial no-coverage zone, which is determined by the VLC receiver reception angle, whereas in some cases, vehicle misalignment can generate a BER increase that can go up to two orders of magnitude.

The use of Visible Light Communications (VLC) in vehicular applications has become a major research area due to its simplicity, high performance to cost ratio, and great deployment potential. In this context, this article provides one of the very few analyses and experimental evaluations concerning the integration of a light dimming function in vehicular VLC systems. For this purpose, a vehicle-to-vehicle VLC prototype has been implemented and used to evaluate the systems’ communication performances in light dimming conditions, while decreasing the duty cycle from 40% to 1%, and increasing the communication range from 1 to 40–50 m. The experimental results showed that in normal lighting conditions, the VLC technology can easily support low duty cycle light dimming for ranges up to 40 m, while maintaining a 10⁻⁶ BER. Nevertheless, in strong optical noise conditions, when the system reaches its SNR limit, the communication range can decrease by half, whereas the BER can increase by 2–4 orders of magnitude. This article provides consistent evidence concerning the high potential of the VLC technology to support inter-vehicle communication links, even in light dimming conditions.

The usage of Visible Light Communications (VLC) technology in automotive applications is very promising. Nevertheless, in outdoor conditions, the performances of existing VLC systems are strongly affected by the sun or other sources of light. In such situations, the strong parasitic light can saturate the photosensitive element and block data communication. To address the issue, this article analyzes the usage of an adaptive logarithmic transimpedance circuit as an alternative to the classical linear transimpedance circuit. The simulation and experimental evaluation demonstrate benefits of the proposed technique, as it significantly expands the communication distance and optical noise functionality range of the VLC systems and reduces the possibility of photoelement saturation. As a result, this approach might enable outdoor VLC sensors to work in strong sun conditions, the experimental results confirming its validity not only in the laboratory but also in outdoor conditions. A reliable 50 m communication distance is reported for outdoor sunny conditions using a standard power traffic light VLC emitter and a PIN photodiode VLC sensor.

In urban areas, pedestrians are the road users category that is the most exposed to road accident fatalities. In this context, the present article proposes a totally new architecture, which aims to increase the safety of pedestrians on the crosswalk. The first component of the design is a pedestrian detection system, which identifies the user’s presence in the region of the crosswalk and determines the future street crossing action possibility or the presence of a pedestrian engaged in street crossing. The second component of the system is the visible light communications part, which is used to transmit this information toward the approaching vehicles. The proposed architecture has been implemented at a regular scale and experimentally evaluated in outdoor conditions. The experimental results showed a 100% overall pedestrian detection rate. On the other hand, the VLC system showed a communication distance between 5 and 40 m when using a standard LED light crosswalk sign as a VLC emitter, while maintaining a bit error ratio between 10⁻⁷ and 10⁻⁵. These results demonstrate the fact that the VLC technology is now able to be used in real applications, making the transition from a high potential technology to a confirmed technology. As far as we know, this is the first article presenting such a pedestrian street crossing assistance system.

As the interest toward communication-based vehicle safety applications is increasing, the development of secure wireless communication techniques has become an important research area. In this context, the article addresses issues that are related to the use of the visible light communication (VLC) technology in vehicular applications. Thus, it provides an extensive presentation concerning the main challenges and issues that are associated to vehicular VLC applications and of some of the existing VLC solutions. Moreover, the article presents the aspects related to the design and intensive experimental evaluation of a new automotive VLC system. The experimental evaluation performed in indoor and outdoor conditions shows that the proposed system can achieve communication distances up to 50 m and bit error ratio (BER) lower than 10⁻⁶, while being exposed to optical and weather perturbations. This article provides important evidence concerning the snowfall effect on middle to long range outdoor VLC, as the proposed VLC system was also evaluated in snowfall conditions. Accordingly, the experimental evaluation showed that snowfall and heavy gust could increase bit error rate by up to 10,000 times. Even so, this article provides encouraging evidence that VLC systems will soon be able to reliably support V2X communications.