The response and recovery of turbulent pipeflow over multiple square bar roughness elements with periodic and staggered patterns are examined at a Reynolds number of 1.56 × 105. The square bar roughness elements have a height of h/D = 0.05 and 0.1. Two, three, and four periodically separated bar elements are considered using the smaller height of 0.05, along with one with staggered separation between four tandem elements. An asymptotic trend in response and recovery is observed with three bar roughness elements, after which no substantial variations occur with additional elements. The three elements in the pipe increase the rate of turbulent diffusion compared to cases with a smaller number of elements, which leads to a faster recovery. The separation patterns have negligible effects on the overall recovery or response as long as the elements are positioned outside the recirculation zone formed by the upstream element.
The wake of a wall-mounted finite prism is numerically studied and characterized with an aspect ratio (height-to-width) of $1$ and varying depth ratios (length to width) of between $0.016$ and $4$ at Reynolds numbers of 50–500. The prism is immersed in a laminar boundary layer. The minimum depth ratio considered here accounts for the special case of a wall-mounted very thin prism (similar to a flat plate), which is used to establish the mechanism and evolution of the wake associated with free-end effects and the shear-layer dynamics in small aspect-ratio prisms. The onset of an unsteady wake behind a very thin prism at a Reynolds number of $200$ is characterized by symmetric shedding of hairpin-like vortices. A unique asymmetric wake pattern appears at lower depth ratios starting at a Reynolds number of 250, which transitions to an symmetric wake with increasing depth ratio. The threshold depth ratio for this symmetric transition increases with Reynolds number. The asymmetric wake results from alternate shear-layer peel-off from either side of the prism, which itself is attributed to the out-of-phase shedding of tip vortices at a lower Strouhal number ( $St_{sh}/2$ ) that interact with the detaching side shear layers. Alternate shedding of tip vortices form secondary vortex structures that are fed by the excess vorticity resulting from shear-layer detachment from either side of the prism. Increasing the depth ratio leads to simultaneous shedding of the tip vortices, which restores the commonly observed wake symmetric patterns. Thus, we identify and characterize the formation and interaction mechanisms of symmetric and asymmetric wakes during the transition process with increasing Reynolds number for different depth-ratio prisms.
The Reynolds number effects and scaling on response and recovery of flow over square bar roughness elements are numerically examined at a range of Reynolds numbers between 5 × 103 and 1.56 × 105. The square bar roughness element has a height of 0.05D, where D is the pipe diameter. The response is examined using streamline plots and reattachment lengths. An asymptotic trend is observed in reattachment lengths with increasing the Reynolds number. The recovery is examined quantitatively by tracing the transport of Reynolds shear stress downstream of the roughness element. While the overall trend for recovery is similar for all Reynolds numbers, the collapse of stresses toward the wall appears earlier at lower Reynolds numbers. The recovery trends follow a power-law of diffusion toward the centerline. The point of initial response, that is, the point of collapse, appears independent from the effects of Reynolds numbers at Re ≥ 5.0 × 104.
The influence of viscoelastic polymer additives on response and recovery of turbulent pipeflow over square bar roughness elements was examined using Direct Numerical Simulations at a Reynolds number of . Two different bar heights for the square bar roughness elements were examined, and . A Finitely Extensible Non-linear Elastic-Peterlin (FENE-P) rheological model was employed for modeling viscoelastic fluid features. The rheological parameters for the simulation corresponded to a high concentration polymer of 160 ppm. Recirculation regions formed behind the bar elements by the viscoelastic fluid were shorter than those associated with Newtonian fluid, which was attributed to mixed effects of viscous and elastic forces due to the added polymers. The recovery of the mean viscoelastic flow was faster. The pressure losses on the surface of the roughness were larger compared to the Newtonian fluid, and the overall contribution to local drag was reduced due to viscoelastic effects.
This paper presents a numerical investigation of the turbulence transition phenomenon in the wake of wall-mounted prisms. Large-eddy simulations are performed at $Re = 1\times 10^3 {-}5\times 10^3$ for prisms with a range of aspect ratio (height to width) from $0.25$ to $1.5$ , and depth ratios (length to width) between $1$ and $4$ . The results show that the wake irregularity is enhanced with increasing depth ratio, evidenced by higher turbulent kinetic energy ( ${\approx}90\,\%$ ) near the leading edge, and the onset of irregular, unsteady vortex shedding. This is attributed to interactions between Kelvin–Helmholtz instability (KHI) of the shear layer and large-scale vortex shedding, and it is induced by an unsteady shear layer, resembling flapping-like motion. These interactions elevate the flow momentum due to increased turbulence intensity and mixing, contributing to the wake transition phenomenon. To this end, this study defines the role of depth ratio in the transition phenomenon by showing that increasing depth ratio (e.g. from $1$ to $4$ ) leads to earlier onset of KHIs in the shear layer. These instabilities intensify with depth ratio, resulting in stronger interactions between shear layer and large-scale vortex shedding. Specifically, KHI-induced vortices interact more frequently with large-scale wake structures for higher depth ratio prisms, exciting larger flow fluctuations and irregular wake patterns. This interaction alters the frequency and coherence of vortex shedding, revealing a complex coupling mechanism that drives the transition to turbulence.
This numerical investigation explores the flow dynamics around wall-mounted prisms with small aspect-ratio (AR=0.25−1.5) and changing depth-ratio (streamwise length, DR=1−4) at a Reynolds number of Re=1000−2500. This study focuses on understanding the formation and evolution of Kelvin–Helmholtz Instability (KHI) and its interactions with coherent wake structures, e.g., hairpin-like vortices. Additionally, it examines the influence of depth-ratio on prism surface pressure distribution and the origin of pressure fluctuations. The results, driven from the extreme geometrical cases of AR=1, DR=1 and 4 at Re=2500, reveal distinct KHI rollers originating from the leading edge shear layer. These impact prism surface pressure distribution and contribute to downstream wake structures. Interactions between KHI rollers and coherent wake structures are more pronounced for larger depth-ratio prisms, leading to a complex wake system. These interactions are quantified using turbulence–mean-shear interaction and turbulence–turbulence interaction from analyzing the Poisson equation. Cross-spectral density analysis highlights the influence of KHI rollers on coherent structures in the wake. These findings emphasize the significance of depth-ratio in shaping prism flow dynamics.