Alexander Anikin

Mr. Alexander Anikin

Power Engineering Faculty, South Ural State University, 454080 Chelyabinsk, Russia
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2017
Verified
Conference Paper
Closed access
VKV. L. Kodkin
V. L. Kodkin
Alexander AnikinAlexander Anikin
Alexander Anikin
ABA. A. Baldenkov
A. A. Baldenkov
The article presents the results of a study into the asynchronous electric drive with positive dynamic feedback on stator current. The experiments were carried out with external analog processing and generating a control signal unit and the programmable logic controller. Correction algorithms are based on previously conducted theoretical studies and computer modeling. The resulting diagrams of transient processes confirm that the proposed correction in static modes is much more efficient than the traditional IR-compensation, and the reaction to the load sketch exceeds the closed-speed electric drive by dynamic characteristics. The ndustrial equipment by Schneider Electric - Frequency converter ATV71 and PLC Modicon TM241 - was used as a pilot.

14 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
Vladimir KanoveiVladimir Kanovei
Vladimir Kanovei
Alexander AnikinAlexander Anikin
Alexander Anikin
This article considers the possibility of connecting the problems of the engineering synthesis of frequency control systems for induction motor drives (IMD) with the theory of the identification of IMD based on the equations of a generalized AC electric machine. The article presents experimental studies of load parrying in IMD with vector (VC) and scalar (SC) controls. These results indicate the absence of fundamental advantages in a drive with VC. This advantage should manifest in a more efficient formation of the moment and fast transients. A method was proposed for describing IMD by nonlinear transfer functions, making it possible to formulate the principle of the correction of IMD and a method for assessing their efficiency. The article shows that the correction based on the proposed nonlinear transfer functions of the induction motor is much more efficient than the traditional VC, which was confirmed by detailed experiments and modeling. The most important results are given in the article. An assumption was made that the efficiency advantage was due to more accurate identification of the dynamics of an IMD with a gear function instead of vector equations.

1 October 2014 in Russian Electrical Engineering
Verified
Journal Article
Closed access
PDF file
VKV. L. Kodkin
V. L. Kodkin
Alexander AnikinAlexander Anikin
Alexander Anikin
YSYa. A. Shmarin
Ya. A. Shmarin
This paper considers features of mechanical characteristics of induction motor drives, as well as methods that increase their efficiency in a static regime under overloading. The induction motor vector diagrams are constructed by an L-shaped equivalent circuit taking into account and neglecting the stator resistance in order to describe the physical process of reducing the electromagnetic torque with increasing frequency of the supply voltage. Using vectors of rotor current codirected with the main magnetic flux of magnetizing current and the angle between them, it is shown how the shape of a torque triangle changes with increasing frequency of the supply voltage. Mathematical analysis of the elaborated formula of Kloss showed that the derivative of the electromagnetic torque of the induction motor has a negative sign in terms of the frequency of the supply voltage. Due to this, the conventional methods of correction under overloading, which increase the supply voltage frequency with the increasing stator currents, lead to even higher currents and reduction of the actual engine speed. Algorithms for improving the efficiency of frequency control of induction electric drives are proposed. Under a heavy load, it is required to increase the flux in the motor voltage by increasing the voltage, and if this is not possible, by reducing the frequency. The proposed algorithms are confirmed by experimental studies of the traction drive of a shaft self-propelled car.

1 March 2020 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Verified
Journal Article
Open access
PDF file
VKVladimir L. Kodkin
Vladimir L. Kodkin
Alexander AnikinAlexander Anikin
Alexander Anikin
ABAleksander Aleksandrovich Baldenkov
Aleksander Aleksandrovich Baldenkov
The article is a continuation of the authors' work in research, mainly experimental, asynchronous electric drives with frequency regulation (AED FR) of hoisting-and-transport mechanisms, in which for constructive, operational and other reasons it is difficult to install additional sensors, for example encoders. The results of the analysis of the dynamics of AED FR with two types of sensorless control: vector and scalar are presented in this article. The study was conducted by mathematical modeling in the Simulink application of the MatLab software using standard control system models. The processes of sequential acceleration of the engine to fixed speeds with overload and load shedding on each of them were simulated. At the same time, the speed and effective values of the flux linkages of the rotor and stator and the stator current were monitored, by which the dynamics and efficiency of each type of control were evaluated. As in experimental studies, the dynamic and efficiency of a more stable scalar control was significantly improved by the use of dynamic positive feedback on stator current.

1 May 2015
Verified
Conference Paper
Closed access
VKV.L. Kodkin
V.L. Kodkin
Alexander AnikinAlexander Anikin
Alexander Anikin
The present article deals with the peculiarities of induction motor drives, as well as the methods of increasing their efficiency in static modes. The physical process of reducing the electromagnetic torque by increasing frequency of the supply voltage is illustrated by vector diagrams and proved by mathematical analysis of the refined Kloss formula. Under heavy load the motor flux should be increased by increasing the motor voltage, and if it isn't possible - by reducing the frequency. The proposed algorithms are confirmed by experiments on traction drive of self-propelled car.

1 March 2020 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Verified
Journal Article
Open access
PDF file
VKVladimir L. Kodkin
Vladimir L. Kodkin
Alexander AnikinAlexander Anikin
Alexander Anikin
ABAleksandr Aleksandrovich Baldenkov
Aleksandr Aleksandrovich Baldenkov
Frequency analysis of processes in the frequency-controlled induction motor drive s, as in automatic control systems with dynamic non-linearities, are presented in this paper. For the first time, dynamic formulas of transfer functions of a torque driver in an induction motor with frequency control, taking into account the slip and frequency of the stator voltage, are proposed. Methods for constructing families of frequency characteristics of such electromechanical systems with “frozen” but different values of the frequency of the stator voltage and slip are described. The frequency characteristics corresponding to these transfer functions are constructed in the Simulink application of the MatLab software. Based on results of the analysis the structural correction methods that improve the dynamics of such nonlinear systems are proposed. The nonlinear transfer functions obtained in this work made it possible to substantiate structural solutions that linearize frequency-controlled electric drives and significantly increase their efficiency. This paper is an example of how the initial complicated (but more accurate) interpretation of nonlinearity allowed us to find a new best solution to the problem of controlling a complex dynamic object.