A multifunctional switchable terahertz (THz) absorber based on graphene and vanadium dioxide (VO₂) is presented. The properties of the absorber are studied theoretically by the finite-difference time-domain (FDTD) method. The results illustrate that the structure switches between the single-broadband or double-broadband absorption depending on the temperature of VO₂. Moreover, the amplitude of the absorptivity can be adjusted by changing the Fermi energy level (E_F) of graphene or the conductivity of VO₂ separately. Via impedance matching theory, the physical mechanism of the absorber is researched. Furthermore, the effects of incidence angle on absorption have also been studied. It is found that the absorber is insensitive to the polarization of electromagnetic waves.

We designed an infrared ultra-broadband metal–insulator–metal (MIM)-based absorber which is composed of a top layer with four different chromium (Cr) nano-rings, an intermediate media of aluminum trioxide (Al₂O₃), and a bottom layer of tungsten (W). By using the finite-difference time-domain (FDTD), the absorption performance of the absorber was studied theoretically. The results indicate that the average absorption of the absorber can reach 94.84% in the wavelength range of 800–3000 nm. The analysis of the electric and magnetic field indicates that the ultra-broadband absorption rate results from the effect of local surface plasmon resonance (LSPR). After that, the effect of structural parameters, metal and dielectric materials on the absorptivity of the absorber was also discussed. Finally, the effect of incidence angle on absorption was investigated. It was found that it is not sensitive to incidence angle; even when incidence angle is 30°, average absorptivity can reach 90%. The absorber is easy to manufacture and simple in structure, and can be applied in infrared detection and optical imaging.

We propose and demonstrate a tunable dual-band mid-infrared absorber structure based on the coupling effect of a surface plasmon polariton (SPP) and Tamm phonon-polariton (TPhP). The structure is composed of the distributed Bragg reflector (DBR), air layer, SiC and graphene ribbons. In the air layer, the graphene ribbons are embedded to realize the localized SPP (LSPP), which makes the structure support both the graphene LSPP (GLSPP) and TPhP. The absorption properties of the structure are investigated theoretically and numerically. It is found that strong coupling of the GLSPP and TPhP can be realized by choosing reasonable parameters, which causes a dual-frequency perfect absorption and makes the maximum Rabi splitting of the coupled mode reach 5.76 meV. Furthermore, the mode coupling and absorption intensity can be tuned by adjusting the thickness of the air layer and the Fermi level of the graphene ribbons. This work might provide new possibilities for the development of mid-infrared band sensors, filters and emitters based on the coupling of multiple modes.

A dual broadband terahertz bifunction absorber that can be actively tuned is proposed. The optical properties of the absorber were simulated and numerically calculated using the finite-difference time-domain (FDTD) method. The results show that when the conductivity of vanadium dioxide is less than ${\sigma }_0=8.5\times {10}^3$ S/m, the absorptance can be continuously adjusted between 2% and 100%. At vanadium dioxide conductivity greater than ${\sigma }_0=8.5\times {10}^3$ S/m, the absorption bandwidth of the absorber can be switched from 3.4 THz and 3.06 THz to 2.83 THz and none, respectively, and the absorptance remains above 90%. This achieves perfect modulation of the absorptance and absorption bandwidth. The physical mechanism of dual-broadband absorptions and perfect absorption is elucidated by impedance matching theory and electric field distribution. In addition, it also has the advantage of being polarization insensitive and maintaining stable absorption at wide angles of oblique incidence. The absorber may have applications in emerging fields such as modulators, stealth and light-guided optical switches.

A bifunctional tunable metamaterial composed of pattern metal structure, graphene, and strontium titanate (STO) film is proposed and studied numerically and theoretically. The dual plasmon-induced transparency (PIT) window is obtained by coupling the bright state cut wire (CW) and two pairs of dark state dual symmetric semiring resonators (DSSRs) with different parameters. Correspondingly, slow light effect can also be realized. When shifting independently, the Fermi level of the graphene strips, the amplitudes of the two PIT transparency windows and slow light effect can be tuned, respectively. In addition, when independently tuning the temperature of the metamaterial, the frequency of the dual PIT windows and slow light effect can be tuned. The physical mechanism of the dual-PIT was analyzed theoretically by using a three-harmonic oscillator model. The results show that the regulation function of the PIT peak results from the change of the oscillation damping at the dark state DSSRs by tuning conductivity of graphene. Our design presents a new structure to realize the bifunctional optical switch and slow light.