Design principles, engineering strategies, challenges, and opportunities of gel polymer electrolytes for rechargeable batteries toward wide-temperature applications are thoroughly reviewed.
Developing cost-effective cathode materials is conducive to accelerating the commercialization of sodium-ion batteries. Na4Fe3(PO4)2P2O7 (NFPP) has attracted extensive attention owning to its high theoretical capacity, stable structure, and low cost of raw materials. However, its inherent low conductivity hinders its further application. Herein, carbon-coated NFPP nanospheres are anchored to crumpled MXene nanosheets by an electrostatic self-assembly; this cross-linked structure induced by CTAB not only significantly expands the contact area between particles and improves the electronic conductivity, but also effectively reduces the aggregation of NFPP nanoparticles. The as-designed Na4Fe3(PO4)2(P2O7)@C/Ti3C2Tx (NFPP@MX) cathode exhibits a high discharge capacity (106.1 mAh g−1 g at 0.2 C), good rate capability (60.4 mAh g−1 at 10 C), and a long-life cyclic stability (85.2% capacity retention after 1000 cycles at 1 C). This study provides an effective strategy for the massive production of high-performance NFPP cathodes and broadens the application of MXene in the modification of other cathode materials.
A one-step coprecipitation process is designed to synthesize zinc hexacyanoferrate (ZnHCF) cathodes in aqueous zinc-ion batteries (ZIBs). The morphology of the cathode is influenced by the concentration of the precursor solution and valence of iron ions. The rhombohedral ZnHCF sample exhibits high crystallinity on the microscale in the cut-angle cubic structure, whereas Na-rich NaZnHCF contains many interstitial water molecules in the rhombic nanoplates. Both samples show effective insertion of Zn ions in the aqueous ZnSO4 solution. ZnHCF shows a specific capacity of 66.7 mA h g-1, a redox voltage of 1.73 V, and fast decline in a few cycles. On the other hand, NaZnHCF has a lower specific capacity of 48.2 mA h g-1, showing two voltage platforms and robust cycling stability. However, owing to serious side reactions, both samples have low Columbic efficiency. To improve the properties such as Coulombic efficiency, specific capacity, and cycling stability, Ni ions are introduced by adding 10 wt % NiSO4 to the ZnSO4 electrolyte. The ZnHCF cathode in the Ni-containing electrolyte has the best properties such as a high specific capacity of 71.2 mA h g-1 at a current density of 100 mA g-1, 93% retention of the Coulombic efficiency, and a good rate performance manifested by a reversible capacity of 58.2 mA h g-1 at 1 A g-1. The results reveal a strategy to improve the electrochemical properties of aqueous ZIBs by modifying the electrolytes.
The anode-free lithium metal battery (AFLMB) is attractive for its ultimate high energy density. However, the poor cycling lifespan caused by the unstable anode interphase and the continuous Li consumption severely limits its practical application. Here, facile one-step heat treatment of the Cu foil current collectors before the cell assembly is proposed to improve the anode interphase during the cycling. After heat treatment of the Cu foil, homogeneous Li deposition is achieved during cycling because of the smoother surface morphology and enhanced lithiophilicity of the heat-treated Cu foil. In addition, Li2O-riched SEI is obtained after the Li deposition due to the generated Cu2O on the heat-treated Cu foil. The stable anode SEI can be successfully established and the Li consumption can be slowed down. Therefore, the cycling stability of the heat-treated Cu foil electrode is greatly improved in the Li|Cu half-cell and the symmetric cell. Moreover, the corresponding LFP|Cu anode-free full cell shows a much-improved capacity retention of 62% after 100 cycles, compared to that of 43% in the cell with the commercial Cu foil. This kind of facile but effective modification of current collectors can be directly applied in the anode-free batteries, which are assembled without Li pre-deposition on the anode.
21 May 2024 in Journal of Colloid and Interface Science
The structural defects of ball-milled graphite (BMG) mainly exist as carbon atom vacancies within the graphene structure, which are proven to be the main source of lithium/sodium storage performance promotion of BMGs.