A hydrodynamic/acoustic splitting method was used to examine the effect of supraglottal acoustics on fluid–structure interactions during human voice production in a two-dimensional computational model. The accuracy of the method in simulating compressible flows in typical human airway conditions was verified by comparing it to full compressible flow simulations. The method was coupled with a three-mass model of vocal fold lateral motion to simulate fluid–structure interactions during human voice production. By separating the acoustic perturbation components of the airflow, the method allows isolation of the role of supraglottal acoustics in fluid–structure interactions. The results showed that an acoustic resonance between a higher harmonic of the sound source and the first formant of the supraglottal tract occurred during normal human phonation when the fundamental frequency was much lower than the formants. The resonance resulted in acoustic pressure perturbation at the glottis which was of the same order as the incompressible flow pressure and found to affect vocal fold vibrations and glottal flow rate waveform. Specifically, the acoustic perturbation delayed the opening of the glottis, reduced the vertical phase difference of vocal fold vibrations, decreased flow rate and maximum flow deceleration rate (MFDR) at the glottal exit; yet, they had little effect on glottal opening. The results imply that the sound generation in the glottis and acoustic resonance in the supraglottal tract are coupled processes during human voice production and computer modeling of vocal fold vibrations needs to include supraglottal acoustics for accurate predictions.
21 September 2021 in Journal of Biomechanical Engineering
A combined experimental–numerical work was conducted to comprehensively validate a subject-specific continuum model of voice production in larynx using excised canine laryngeal experiments. The computational model is a coupling of the Navier–Stokes equations for glottal flow dynamics and a finite element model of vocal fold dynamics. The numerical simulations employed a cover-body vocal fold structure with the geometry reconstructed from magnetic resonance imaging scans and the material properties determined through an optimization-based inverse process of experimental indentation measurement. The results showed that the simulations predicted key features of the dynamics observed in the experiments, including the skewing of the glottal flow waveform, mucosal wave propagation, continuous increase of the divergent angle and intraglottal swirl strength during glottal closing, and flow recirculation between glottal jet and vocal fold. The simulations also predicted the increase of the divergent angle, glottal jet speed, and intraglottal flow swirl strength with the subglottal pressure, same as in the experiments. Quantitatively, the simulations over-predicted the frequency and jet speed and under-predicted the flow rate and divergent angle for the larynx under study. The limitations of the model and their implications were discussed.
25 September 2018 in Journal of Biomechanical Engineering
A three-dimensional fluid-structure interaction computational model was used to investigate the effect of the longitudinal variation of vocal fold inner layer thickness on voice production. The computational model coupled a finite element method based continuum vocal fold model and a Navier–Stokes equation based incompressible flow model. Four vocal fold models, one with constant layer thickness and the others with different degrees of layer thickness variation in the longitudinal direction, were studied. It was found that the varied thickness resulted in up to 24% stiffness reduction at the middle and up to 47% stiffness increase near the anterior and posterior ends of the vocal fold; however, the average stiffness was not affected. The fluid-structure interaction simulations on the four models showed that the thickness variation did not affect vibration amplitude, glottal flow rate, and the waveform related parameters. However, it increased glottal angles at the middle of the vocal fold, suggesting that vocal fold vibration amplitude was determined by the average stiffness of the vocal fold, while the glottal angle was determined by the local stiffness. The models with longitudinal variation of layer thickness consumed less energy during the vibrations compared with the constant layer thickness one.
16 February 2022 in Journal of Biomechanical Engineering
This paper proposes a deep-learning based generalized empirical flow model (EFM) that can provide a fast and accurate prediction of the glottal flow during normal phonation. The approach is based on the assumption that the vibration of the vocal folds can be represented by a universal kinematics equation (UKE), which is used to generate a glottal shape library. For each shape in the library, the ground truth values of the flow rate and pressure distribution are obtained from the high-fidelity Navier-Stokes (N-S) solution. A fully-connected deep neural network (DNN) is then trained to build the empirical mapping between the shapes and the flow rate and pressure distributions. The obtained DNN based EFM is coupled with a finite-element method (FEM) based solid dynamics solver for flow-structure-interaction (FSI) simulation of phonation. The EFM is evaluated by comparing to the N-S solutions in both static glottal shapes and FSI simulations. The results demonstrate a good prediction performance in accuracy and efficiency.
1 September 2018 in The Journal of the Acoustical Society of America
This study aims to develop a high-fidelity computer model of voice production which can employ the image-based realistic three-dimensional geometries of larynges and simulate the complex mechanical process of voice production and control, from muscle contraction to flow-structure-acoustics interactions. Such a model will advance our understanding of the relationship between muscle contraction, vocal fold posturing, vocal fold vibration, and final voice outcome, which has important clinical implications for voice management, training, and treatment. The key components of the model include a sharp-interface-immersed-boundary-method based impressible flow model, a finite-element method based nonlinear structural dynamics model and a hydrodynamics/acoustics splitting method based acoustics model. A Hill-based contractile model is coupled in the finite element analysis to capture the active response of vocal fold tissues, and a fiber-reinforced model is employed for the passive response. A series of validations have been performed. The coupled Hill-based model and fiber-reinforced model demonstrated a good agreement with literature experimental data for dynamics, concurrent tissue stimulation, and stretching. The flow-structure-acoustics interaction model was validated with excised canine experiments using realistic geometric and material properties. The simulations showed a good agreement on the fundamental frequency, vocal fold maximum divergent angle, flow rate, and intraglottal velocity and pressure fields.