We present the plasmonic fiber based optical glucometer. A thin gold layer is coated on clad-free core of multimode optical fiber along 3 cm length to excite surface plasmons at 632.8 nm wavelength. Glucose oxidase is immobilized on the metal surface for glucose sensing. The effective surface refractive index increases by gluconic acid and hydrogen peroxide that are generated upon glucose injection, leading to plasmonic condition change with a consequence of optical power change at the fiber output. We obtain limit of detection of glucose concentration of 6.75 mg/dL, indicating higher sensitivity than the wavelength interrogating SPR glucometer that uses a spectrometer of 1nm spectral resolution. The coefficient of variation is 8.6% at a glucose concentration of 80 mg/dL at room temperature. We also examine the effects of ambient temperature variations from −10 °C to 40 °C on the performance of the presented sensor and compared them with those on commercially available glucometers that are based on enzyme electrodes. We find that the presented fiber sensor produced standard deviation of 12.1 mg/dL at a glucose concentration of 80 mg/dL under such varying temperature, which is, even without additional temperature correction function, comparable to the commercialized ones.
Pairs of entangled photons are crucial for photonic quantum technologies. The demand for integrability and multi-functionality suggests “flat” platforms—ultrathin layers and metasurfaces—as sources of photon pairs. Despite the success in the demonstration of spontaneous parametric downconversion (SPDC) from such sources, there are almost no works on spontaneous four-wave mixing (SFWM)—an alternative process to generate photon pairs. Meanwhile, SFWM can be implemented in any nanostructures, including ones made of isotropic materials, which are easier to fabricate than crystalline SPDC sources. Here, we investigate photon pair generation through SFWM in subwavelength films of amorphous silicon nitride (SiN) with varying nitrogen content. For all samples, we demonstrate two-photon quantum correlations, indicated by the normalized second-order correlation function g(2) (0): it exceeds 2 and decays as the pump power increases. By observing two-photon interference between SFWM from the SiN films and the fused silica (FS) substrate, we find the third-order susceptibilities of films with different nitrogen content.
8 November 2021 in ACS Sustainable Chemistry & Engineering
We demonstrate magnetic control of optical reflectance with no ferromagnetic material via combining the Faraday rotation and the surface plasmon resonance (SPR) in a Kretschman configuration under magnetic fields < 0.5 T. The SPR produces the polarization sensitive reflectance from the Au or Ag thin film coated on a N-BK7 prism in which the Faraday rotation occurs. The gold (Au) or silver (Ag) metal film as a plasmonic film somewhat acts as an incident angle-dependent reflection polarizer that can sensitively sense the polarization change induced by the Faraday rotation that occurs in a prism. We find that combination of Faraday rotation and the surface plasmon can induce a significant magnetic modulation of reflectance normalized with respect to that obtained with no magnetic fields at a specific incident angle of light. The magnetic control of optical reflectance presented may find an application in polarizer-free photonic devices with no ferromagnetic material for magneto-optical modulation.
Pairs of entangled photons are crucial for photonic quantum technologies. The demand for integrability and multi-functionality suggests “flat” platforms—ultrathin layers and metasurfaces—as sources of photon pairs. With the success in demonstrating spontaneous parametric down-conversion (SPDC) from such sources, an alternative process to generate photon pairs, spontaneous four-wave mixing (SFWM), also attracts interest. In materials with nonzero second-order nonlinear susceptibility χ(2) , SFWM can generate photon pairs both directly, through the third-order nonlinear susceptibility χ(3) , and in a cascaded way, through second harmonic generation (SHG) followed by SPDC. Usually, the cascaded process is more efficient. Here, we show that in a thin layer, direct SFWM is likely to dominate, because the wavevector mismatch for SFWM is much smaller than for SHG or SPDC. To demonstrate this, we implement photon pair generation via SFWM in a second-order nonlinear material—a thin layer of lithium niobate (LN). The existence of both second- and third-order nonlinear processes offers broader opportunities for quantum state engineering.