This research addresses the challenge of effectively removing methylene blue (MTB) dye from wastewater, given its high solubility and stubborn resistance to biodegradation. Iraqi silica sand coated with synthesized aluminum oxide nanoparticles (SSC–Al2O3) was investigated as a novel adsorbent for removing MTB molecules. This study demonstrated the adsorption capacity of SSC–Al2O3 in a batch configuration and predicted the breakthrough curves in a fixed-bed column reactor. At the ideal pH (6), under an agitation speed of 200 rpm and 75 minutes, isothermal equilibrium adsorption achieved 95.33% adsorption efficiency. Adsorption isotherms followed the Freundlich isotherm type. Experiments were carried out applying fixed bed columns with bed heights of 4 cm (78.5 g), 7 cm (137.4 g), and 10 cm (196.3 g) with a flow rate of 10 L h−1. The bed height of (10 cm) offered the longest breakthrough time and the least steep breakthrough curve. Higher flow rates decreased the adsorption capacity and yielded steeper breakthrough curves. FTIR analysis of SSC–Al2O3 showed that the hydroxyl, carboxyl, and amine functional groups were involved in bonding between MTB dye and the sorbent. This shows that SSC–Al2O3 has excellent ability in batch and continuous flow systems to treat industrial wastewater containing MTB dye.
Dissolution of gypsum rock in water is significant, which may result in hydrocarbon reservoir formation and evaporate deposits. However, the complexity of the gypsum dissolution process is still of interest because of its uncleanness that requires more critical analysis. The objectives of this experimental study are emphasis on the dissolution characteristics of gypsum rock under room temperature and by various types of water; namely: deionized, tap, fresh, acidic, well, and normal rainwatre. In addition, the influences of dissolution on gypsum rock's mechanical and physical characteristics. Gypsum rock was obtained from Agjalar area, in the southwest of Sulaymaniyah city, Northern Iraq. Experimental results show that well water is the most effective type to dissolve gypsum and cause significant reductions in the mechanical characteristics of gypsum rock.