Solid propellant is the main part of solid rocket motor (SRM). To further investigate the service life of SRM, aging of solid propellant should be concerned. The aim of this study is to propose a new aging constitutive model of solid propellant using the degree of crosslinking. The aging development equation of viscoelastic Poisson’s ratio (VPR) and relaxation modulus are considered in establishing the model. A series accelerated aging experiments accompanied with some tensile tests are designed to verify the new model. Aging experiments show that degree of crosslinking (DCL) can be used to act as a link to facilitate the communication between chemical aging and aged mechanical parameters well.
19 March 2022 in International Journal of Aerospace Engineering
A direct abort orbit design method is presented for direct abort missions in the Earth-Moon transfer phase of crewed lunar exploration missions. First, according to the demand of an emergency rescue in the Earth-Moon transfer phase, two direct abort orbit schemes are introduced. Then, a serial orbit design method is proposed for a high-fidelity direct abort orbit. An analytical model is established for the calculation of initial values, and the optimization design is performed in the high-fidelity orbit model to determine a single-impulse abort orbit. A hybrid optimization design process is proposed to generate a two-impulse abort orbit. The results of simulation examples verify the validity and feasibility of the proposed direct abort orbit design method. Finally, extensive simulations are carried out to analyze the characteristics of abort impulse and abort return time and reveal the general rules of direct abort orbits. The research conclusions can provide a reference for the design of emergency rescue schemes in future crewed lunar exploration missions.
15 June 2023 in International Journal of Aerospace Engineering
To further investigate the fracture response in propellant grain, numerical methodology is proposed to cope with crack propagation simulation especially for the mixed mode condition. The numerical discrete scheme of the propellant linear viscoelastic constitutive model is proposed, which provides a key means for the simulation of crack propagation. In order to simulate the cohesive traction distribution on the new crack surface, the extrinsic Park-Paulino-Roesler (PPR) cohesive zone model (CZM) is introduced. To let the crack propagate along any direction determined, element splitting technique and its corresponding topological operations are proposed step by step. Then, computational simulation implementation process is explained in greater detail. Typical fracture problem, single edge-notched tension test (SENT) is solved to demonstrate the efficiency and accuracy of the proposed method. In addition, double edge-notched tension test (DENT) as well as plate tension test with a slant crack is conducted to show the special fracture characters in viscoelastic solid propellant, like time dependence. Computational results reveal that the method proposed can be utilized in further fracture investigation in solid propellant combined with the experimental findings.