This paper presents a robust IoT-enabled smart water monitoring system that employs an ESP32 microcontroller for real-time analysis of domestic water consumption patterns. By integrating YF-S201 Hall-effect water flow sensor, the system accurately measures flow rates, processes data at the edge, and transmits results to a Grafana cloud visualization platform for intuitive monitoring and analysis. The proposed solution employs MQTT protocols for efficient data transmission, ensuring lowpower operation and minimal network overhead, integrating SQLite database and CSV file for data analysis. Experimental validation demonstrates the system's ability to identify anomalies, such as leaks and irregular usage, enabling proactive water conservation. The implementation showcases best practices in IoT data acquisition, transmission optimization, and scalable cloud storage. This work contributes to sustainable water management by providing a cost-effective and adaptable solution for residential and industrial applications.
This paper presents the design and implementation of a low-cost autonomous vehicle prototype that employs machine learning (ML) and computer vision techniques. The prototype integrates a ResNet-18 convolutional neural network (CNN), trained using PyTorch and deployed on an NVIDIA Jetson Nano-a compact, GPU-accelerated computing platform based on the JetBot architecture. The objective is to demonstrate the feasibility of implementing ML algorithms on affordable embedded hardware for real-time navigation tasks such as lane detection and path following. The development workflow includes image data acquisition, model training, and validation through physical testing on a $2.44 ~\mathrm{m} \times 1.24 ~\mathrm{m}$ modular track. More than 2,600 labeled images were used to train the model across five $t$ rack $s$ cenarios, $w$ ith $t$ he $b$ est $c$ onfiguration ob tained after 60 epochs. Experimental results show that the trained ResNet-18 model achieved up to 70 % trajectory-tracking accuracy and a continuous navigation distance of 208 cm before deviation. These results confirm t hat the J etson N ano p latform c an effectively execute CNN-based control tasks in real time. This study contributes to scalable and cost-effective autonomous vehicle research by bridging the gap between theoretical ML applications and practical embedded implementations in resource-constrained environments.
This work presents solar energy design for generation at high altitudes $(3800+$ meters above sea level) for domestic use, focusing on Puno, Peru. Most solar installations in the region rely entirely on controllers and inverters, lacking IoT-based monitoring to track real-time battery storage and system performance. To address this gap, we propose an embedded system combining a Raspberry Pi, PZEM-016 energy meter, MQTT protocol, and cloud visualization. The system provides real-time data on power storage, system efficiency, enabling optimized energy use. Additionally, we evaluate the scalability potential of photovoltaic systems in high-altitude environments, where solar radiation intensity differs significantly from lower elevations. This approach not only improves monitoring but also supports future expansions of residential solar power systems in similar regions. Unlike conventional IoT monitoring tested at sea level, our implementation specifically addresses high-altitude challenges $(3800+$ masl) in Puno, Peru, where irradiance is extreme and climatic variability requires robust and low-cost monitoring.