Ammonia is becoming increasingly popular as a carbon-neutral fuel with zero carbon dioxide emissions. However, a significant hurdle lies in its combustion, which leads to substantial emissions of NOx. The current research involves conducting a chemical kinetic investigation to examine the characteristics of Intense Low oxygen Dilution (MILD) or Moderate combustion in ammonia (NH3)/air flames. This study is carried out under specific conditions, such as oxygen concentrations ranging from 11to 23%, premixed reactant temperatures between 1300 and 1700 K, and a pressure of one atmosphere. The study focuses on investigating the combustion characteristics of MILD using dilution with H2O and N2.With the rise in the inlet temperature of the premixed reactant, the peak temperature of the flame also rises. Moreover, flames diluted with H2O exhibit lower peak temperatures compared to flames diluted with N2.Flames diluted with H2O result in lower NOx emissions compared to flames diluted with N2. Additionally, for N2diluted flames, the exit NOx emissions rise as the oxygen concentration increases.Despite this, NOx emissions from H2Odiluted flames demonstrate non-monotonic behaviour.This means that the exit NOx increases initially as the oxygen concentration reaches 21%, but then begins to decrease. In contrast to N2and H2Odiluted flames exhibits a wider regime of no-ignition.Moreover, the rise in peak temperature in H2Odiluted flames is less apparent than in N2diluted flames, corresponding to broader ranges MILD combustion ranges.Furthermore, to attain MILD combustion in H2O diluted flames at a specific O2 concentration, the temperature of reactant needs to be higher than that required for N2diluted flames.
An experimental and numerical model to determine the exergy balance based on flow availability and availability transfer in the process of liquefied petroleum gas (LPG)/air combustion in mesoscale gas turbine combustor is developed to elucidate the second law efficiency and total thermodynamic irreversibility. In terms of developing an energy and exergy-efficient combustor design, the present work highlights the influence of vortex shedding and recirculation in the volumetric entropy production and the exergy efficiency. It is performed in a heat recuperative high-intensity LPG-fueled mesoscale combustor for mini-gas turbine applications. The combustor is operated at different thermal inputs ranging from 0.2 to 1.0 kW under range of equivalence ratios of ϕ = 0.4–1.23. The Favre-averaged governing equations are solved by using finite volume-based approach. The standard k–ε turbulence model with modified empirical constant, , is considered to model the turbulence quantities. The volumetric reaction-based eddy-dissipation concept model and a reduced skeletal model (50 species and 373 reactions) are used for turbulence–chemistry interaction. The design methodology, total volumetric entropy generation, destructive exergy due to thermodynamic irreversibility, exergy efficiency, flow recirculation, and mixing characteristics (reacting and non-reacting) are reported. The entropy generation rate due to thermal conduction is approximately 50% of the total entropy generation, while its contribution percentage due to chemical reaction is the smallest. The exergy efficiency reaches its peak with = 79.41% at 1.0 kW under fuel-rich condition, while its minimum value of 41.49% is obtained at 0.2 kW under fuel-lean (ϕ = 0.8) condition.
This article presents the results of computations on pilot-based turbulent methane/air co-flow diffusion flames under the influence of the preheated oxidizer temperature ranging from 293 to 723 K at two operating pressures of 1 and 3 atm. The focus is on investigating the soot formation and flame structure under the influence of both the preheated air and combustor pressure. The computations were conducted in a 2D axisymmetric computational domain by solving the Favre averaged governing equation using the finite volume-based CFD code Ansys Fluent 19.2. A steady laminar flamelet model in combination with GRI Mech 3.0 was considered for combustion modeling. A semi-empirical acetylene-based soot model proposed by Brookes and Moss was adopted to predict soot. A careful validation was initially carried out with the measurements by Brookes and Moss at 1 and 3 atm with the temperature of both fuel and air at 290 K before carrying out further simulation using preheated air. The results by the present computation demonstrated that the flame peak temperature increased with air temperature for both 1 and 3 atm, while it reduced with pressure elevation. The OH mole fraction, signifying reaction rate, increased with a rise in the oxidizer temperature at the two operating pressures of 1 and 3 atm. However, a reduced value of OH mole fraction was observed at 3 atm when compared with 1 atm. The soot volume fraction increased with air temperature as well as pressure. The reaction rate by soot surface growth, soot mass-nucleation, and soot-oxidation rate increased with an increase in both air temperature and pressure. Finally, the fuel consumption rate showed a decreasing trend with air temperature and an increasing trend with pressure elevation.