Steven Verpaele

Mr. Steven Verpaele

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
USUrs Schlueter
Urs Schlueter
SASusan Arnold
Susan Arnold
Francesca BorghiFrancesca Borghi
Francesca Borghi
John CherrieJohn Cherrie
John Cherrie
WFWouter Fransman
Wouter Fransman
NGNatalie von Goetz
Natalie von Goetz
On 20 October 2020, the Working Group “Exposure Models” of the Europe Regional Chapter of the International Society of Exposure Science (ISES Europe) organised an online workshop to discuss the theoretical background of models for the assessment of occupational exposure to chemicals. In this report, participants of the workshop with an active role before and during the workshop summarise the most relevant discussion points and conclusions of this well-attended workshop. ISES Europe has identified exposure modelling as one priority area for the strategic development of exposure science in Europe in the coming years. This specific workshop aimed to discuss the main challenges in developing, validating, and using occupational-exposure models for regulatory purposes. The theoretical background, application domain, and limitations of different modelling approaches were presented and discussed, focusing on empirical “modifying-factor” or “mass-balance-based” approaches. During the discussions, these approaches were compared and analysed. Possibilities to address the discussed challenges could be a validation study involving alternative modelling approaches. The wider discussion touched upon the close relationship between modelling and monitoring and the need for better linkage of the methods and the need for common monitoring databases that include data on model parameters.

21 June 2021 in Open Research Europe
Verified
Journal Article
Open access
AKAntti Koivisto
Antti Koivisto
Andrea SpinazzèAndrea Spinazzè
Andrea Spinazzè
FVFrederik Verdonck
Frederik Verdonck
Francesca BorghiFrancesca Borghi
Francesca Borghi
JLJakob Löndahl
Jakob Löndahl
IFIrini Furxhi
Irini Furxhi
Background: The Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) regulation requires the establishment of Conditions of Use (CoU) for all exposure scenarios to ensure good communication of safe working practices. Setting CoU requires the risk assessment of all relevant Contributing Scenarios (CSs) in the exposure scenario. A new CS has to be created whenever an Operational Condition (OC) is changed, resulting in an excessive number of exposure assessments. An efficient solution is to quantify OC concentrations and to identify reasonable worst-case scenarios with probabilistic exposure modeling. Methods: Here, we appoint CoU for powder pouring during the industrial manufacturing of a paint batch by quantifying OC exposure levels and exposure determinants. The quantification was performed by using stationary measurements and a probabilistic Near-Field/Far-Field (NF/FF) exposure model. Work shift and OC concentration levels were quantified for pouring TiO 2 from big bags and small bags, pouring Micro Mica from small bags, and cleaning. The impact of exposure determinants on NF concentration level was quantified by (1) assessing exposure determinants correlation with the NF exposure level and (2) by performing simulations with different OCs. Results: Emission rate, air mixing between NF and FF and local ventilation were the most relevant exposure determinants affecting NF concentrations. Potentially risky OCs were identified by performing Reasonable Worst Case (RWC) simulations and by comparing the exposure 95 th percentile distribution with 10% of the occupational exposure limit value (OELV). The CS was shown safe except in RWC scenario (ventilation rate from 0.4 to 1.6 1/h, 100 m 3 room, no local ventilation, and NF ventilation of 1.6 m 3/min). Conclusions: The CoU assessment was considered to comply with European Chemicals Agency (ECHA) legislation and EN 689 exposure assessment strategy for testing compliance with OEL values. One RWC scenario would require measurements since the exposure level was 12.5% of the OELV.

16 June 2025 in Environment International
Verified
Journal Article
Open access
Maryam Zare JeddiMaryam Zare Jeddi
Maryam Zare Jeddi
KGKaren Galea
Karen Galea
JAJillian Ashley-Martin
Jillian Ashley-Martin
JNJulianne Nassif
Julianne Nassif
TPTyler Pollock
Tyler Pollock
NHNancy B. Hopf
Nancy B. Hopf
Human biomonitoring (HBM) provides an integrated chemical exposures assessment considering all routes and sources of exposure. The accurate interpretation and comparability of biomarkers of exposure and effect depend on harmonized, quality-assured sampling, processing, and analysis. Currently, the lack of broadly accepted guidance on minimum information required for collecting and reporting HBM data, hinders comparability between studies. Furthermore, it prevents HBM from reaching its full potential as a reliable approach for assessing and managing the risks of human exposure to chemicals. The European Chapter of the International Society of Exposure Science HBM Working Group (ISES Europe HBM working group) has established a global human biomonitoring community network (HBM Global Network) to develop a guidance to define the minimum information to be collected and reported in HBM, called the "Minimum Information Requirements for Human Biomonitoring (MIR-HBM)". This work builds on previous efforts to harmonize HBM worldwide. The MIR-HBM guidance covers all phases of HBM from the design phase to the effective communication of results. By carefully defining MIR for all phases, researchers and health professionals can make their HBM studies and programs are robust, reproducible, and meaningful. Acceptance and implementation of MIR-HBM Guidelines in both the general population and occupational fields would improve the interpretability and regulatory utility of HBM data. While implementation challenges remain-such as varying local capacities, and ethical and legal differences at the national levels, this initiative represents an important step toward harmonizing HBM practice and supports an ongoing dialogue among policymakers, legal experts, and scientists to effectively address these challenges. Leveraging the data and insights from HBM, policymakers can develop more effective strategies to protect public health and ensure safer working environments.

JHJames Hanlon
James Hanlon
KGKaren Galea
Karen Galea
SVSteven Verpaele
Steven Verpaele
We provide a narrative review on published peer-reviewed scientific literature reporting comparisons of personal samplers in workplace settings published between 2004 and 2020. Search terms were developed for Web of Science and PubMed bibliographic databases. The retrieved studies were then screened for relevance, with those studies meeting the inclusion criteria being taken forward to data extraction (22 studies). The inhalable fraction was the most common fraction assessed with the IOM sampler being the most studied sampler. The most common workplace environment where samplers had been compared was that where metals/metalloids were present. The requirements of EN13205 standard (Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations) have also been considered, with these requirements not currently being met, or at least referred to, in the included published literature. A number of conclusions have been drawn from this narrative review. For studies that reported correction factors, no discernible trends could be identified. Correction factors also varied between samplers and settings, with correction factors varying from 0.67 for Button/IOM in agriculture settings to a correction factor of 4.2 for the closed face cassette/IOM samplers in aluminium smelters. The need for more detailed and informative data sharing from authors is highlighted, providing more context to both the sampling strategy and methodology, as well as the data analysis. It is recommended that the requirements of EN13205 are taken into account when designing sampler comparison studies at the workplace and that these are also reported. It is also considered that there is a need for a clear standardized workplace sampler comparison protocol to be developed, which can be used by the research and occupational hygiene community to allow more robust and transparent assessment of aerosol samplers and better-quality evidence for use by industrial hygienists, epidemiologists, and occupational safety specialists alike.

JHJames Hanlon
James Hanlon
KGKaren Galea
Karen Galea
SVSteven Verpaele
Steven Verpaele
We provide a narrative review on the published peer-reviewed scientific literature reporting sampler efficiency, performance and comparison studies (where two or more samplers have been assessed) in laboratory settings published between 1994 and 2021 (27 year period). This review is a follow-up to our narrative review on the published peer-reviewed scientific literature reporting sampler comparison in workplace settings. Search terms were developed for Web of Science and PubMed bibliographic databases. The retrieved articles were then screened for relevance, with those studies meeting the inclusion criteria being taken forward to data extraction (25 studies). The most common fraction assessed has been the inhalable fraction, with the IOM sampler being the most studied inhalable sampler and the SKC Aluminium cyclone being the most studied respirable sampler from the identified relevant articles. The most common aerosol used has been aluminium oxide. It was evident that standardisation for these sampler performance experiments is lacking. It was not possible to identify any discernible trends for the performance of samplers when assessed with different aerosols. The need for more detailed and informative data sharing from authors is highlighted. This includes provision of clear identifiable information on the samplers used for testing, sampler flow rates (both manufacturer and those actually used in the study, with an explanation given of any differences), detailed information on the test aerosols used and the sampler substrate materials used. An identified gap in the literature is the potential to perform studies aimed at revaluating the performance of samplers to allow any longer-term temporal changes in performance to be assessed. One approach in advancing the field is to produce an updated protocol for the laboratory testing of samplers. This updated protocol would be beneficial for both the research and occupational hygiene community and would allow harmonised assessment and reporting of sampler comparison studies.

21 February 2023 in Heliyon
Verified
Journal Article
Open access
MKMichelle Kelvin
Michelle Kelvin
SVSteven Verpaele
Steven Verpaele
YGYamini Gopalapillai
Yamini Gopalapillai
CPCraig Poland
Craig Poland
MLMatthew Leybourne
Matthew Leybourne
Daniel Layton-MatthewsDaniel Layton-Matthews
Daniel Layton-Matthews
Copper processing operations, such as smelters and refineries, can produce airborne particles that may impact the health of workers. At these operations, worker exposure to chemicals are regularly monitored to ensure that regulatory compliance with occupational exposure limit values (OELVs) are maintained. Determining the type of airborne particles present is important for characterizing the composition of dust exposures and better understanding the relationship between worker exposure and health. Routine methods of analysis (e.g., chemical assay) are unable to differentiate between phases containing the same elements and may result in ambiguity. A novel approach of a combination of Quantitative Evaluation of Materials by Scanning Electron Microscope (QEMSCAN) and chemical characterization was used here to evaluate airborne and settled dust collected at key locations throughout a copper smelter in Europe. The copper (Cu) phases present in the airborne dust are indicative of the activities performed at specific locations. In the batch preparation area where Cu concentrate is received, significant amounts of Cu were carried in sulfidic minerals (chalcocite, chalcopyrite/bornite, >40%), whereas near the anode and electric furnace, the majority of Cu in dust was carried in metallic and oxidic phases (60-70%). Particle size analysis of the settled dust indicates that the sulfidic and oxidic Cu minerals are more likely to become airborne over metallic Cu. Furthermore, overall Cu concentrations decreased with particle size where metallic and oxidic Cu dominate, which suggests that differences in the proportion of Cu forms present in the dust will impact how much Cu ends up in the respirable fraction. These results highlight the need to understand the characterization of Cu in dust in order to set better OELVs.