This paper introduces a new, reference trajectory following, sliding mode control strategy for disturbed discrete time systems. The strategy uses an external trajectory generator based on a switching type reaching law. The trajectory following strategy not only ensures all the properties of the quasi-sliding mode as defined by Gao $et\ al.$ , but with a certain choice of the control parameters it also guarantees a significant reduction of the quasi-sliding mode band width and the errors of all the state variables. The study also considers the problem of error calculation in the discrete time, reaching law based sliding mode control systems. It is shown that the limitation of the sliding variable in the sliding phase directly results in bounded errors of all state variables. The results are verified with a simulation example.
13 August 2018 in International Journal of Adaptive Control and Signal Processing
Variable structure control systems are known to provide a high level of robustness to external disturbances and modeling uncertainties with comparably low computational complexity. Thanks to these features, they have found applications in various fields, such as power engineering, electronics, robotics, and aviation. In recent decades, the field of sliding mode control has developed significantly. Therefore, this study aims to discuss the basic concepts and design methodology of such strategies. Although in the 20th century, continuous-time sliding mode control has been the center of the control engineering society’s attention, it has certain major shortcomings. In particular, such control schemes result in undesirable high-frequency oscillations when applied digitally. Therefore, the more recent discrete-time approach to sliding mode control has gained recognition in the 21st century. Since the introduction of discrete-time sliding mode control strategies, the reaching law-based controller design method has been designed, within which two main paradigms may be named: the switching type and the nonswitching type quasi-sliding mode. This paper presents a broad review of the discrete-time sliding mode control strategies, starting from the definition of sliding mode through the controller design procedures and up to potential applications. The aim of this study is to provide an up-to-date state of the art and introduce readers to the newest trends and achievements in the field of sliding mode control.
7 September 2020 in Mathematical Problems in Engineering
The paper addresses the problem of chattering elimination in sliding mode control for sampled data dynamical systems and proposes an innovative control scheme. The key to the proposed control method is utilizing a pregenerated nonswitching type reference sliding variable profile to control the disturbed plant. As sampled data systems contain sample-and-hold devices in their input and output channels, we carry out a discrete time analysis. We consider the discretization effects on the controller in two aspects: the pace of convergence of the system and the ultimate band width. Consequently, in the reference sliding variable generator, we analyse two reaching laws, differently adapting to changes of the controller’s frequency. We prove that this approach not only minimizes the chattering phenomenon but also provides a reduction of the quasi-sliding mode band width, which in general case remains of O(T) order. Furthermore, the proposed control method incorporates a disturbance compensation algorithm, which results in the ultimate band width of O(T2) order. Finally, we also show that a certain selection of the sliding plane guarantees limitation of all the state variables’ errors to O(T2) order as well. Therefore, the proposed control algorithm significantly improves the system’s robustness.
1 September 2019 in International Journal of Applied Mathematics and Computer Science
This study presents a new, reference trajectory based sliding mode control strategy for disturbed discrete time dynamical systems. The desired trajectory, which is generated externally according to an existing switching type reaching law, determines the properties of the emerging sliding motion of the system. It is proved that an appropriate choice of the trajectory generator parameters ensures the existence of the quasi-sliding motion of the system according to the definition by Gao et al. (1995) in spite of the influence of disturbances. Moreover, the paper shows that the application of the desired trajectory based reaching law results in a significant reduction in the quasi-sliding mode band width and errors of all state variables. Therefore, in comparison with Gao’s control method, the system’s robustness is increased. The paper also presents an additional modification of the reaching law, which guarantees a further reduction in the quasi-sliding mode band in the case of slowly varying disturbances. The results are confirmed with a simulation example.
The aim of this study is to design a new sliding mode controller with disturbance compensation for disturbed sampled data systems. As in such systems, the state measurements and control signal updates take place at the discrete time instants only, discrete time sliding mode analysis must be applied. Considering previous findings in this field, a new quasi-sliding mode controller, based on a reference sliding variable profile is developed. In order to eliminate the chattering problem, the reference is generated with a simple, nonswitching type reaching law. Next, the reference is incorporated into the control law for the real disturbed system. This approach limits the disturbance influence on the plant and results in an ultimate band width of O(T) order. Furthermore, the proposed control strategy is extended with a disturbance compensation method, which allows to achieve the quasi-sliding mode band width of O(T2) order. Hence, the system’s robustness improves with each reduction of the discretization period T. The paper clearly shows that the proposed sliding mode controller guarantees stability of the closed-loop system and eliminates the chattering phenomenon.