The high penetration of inverter-fed renewable energy sources (RESs) in modern energy systems has led to a reduction in the system’s inertial response. This reduction in the rotational inertial response is associated with synchronous generation and might result in a deteriorated frequency response following a power disturbance. This paper investigates the frequency stability of the Kingdom of Saudi Arabia’s (KSA) grid. It includes a description of the changing energy landscape of the KSA’s electricity grid and an investigation of the impact of high penetration levels of inverter-fed RESs on the dynamic behavior of the KSA grid. The impact of RESs has been studied through a simulation of case studies of the future KSA power system using the MATLAB/Simulink simulation software. The frequency stability of the KSA’s power system has been evaluated with various RES levels under peak and base load conditions. The simulation results show that the high penetration levels of RESs dramatically affect the system’s frequency response, especially under off-peak conditions. In addition, the significance of battery energy storage systems (BESSs) for compensating the reduction in the system inertial response has been addressed. The results show the effectiveness of aggregated BESSs for enhancing the system frequency control of the KSA grid.
This paper explores the potential of rooftop solar PV to meet the electricity demand in the urban areas of Abha city, Saudi Arabia (KSA), minimising imports from the grid. A localised energy system for Abha is proposed that considers two types of loads: (i) residential loads with a monthly aggregated energy consumption of 172,440 MWh and an electric demand of 239.5 MW, and (ii) commercial loads with a monthly aggregated energy consumption of 179,280 MWh and an electric demand of 249 MW. The grid currently supplies this load. This paper proposes a PV development planning tool for residential and commercial areas to calculate the total PV production for each type of load to achieve a balanced energy area, considering (i) the number of buildings, (ii) the type of load, (iii) the peak load, and (iv) the total PV array area in m2 per building. The results of the modelling study using real data demonstrate that the anticipated total PV production in residential and commercial areas is sufficient to meet local peak demand, and there is an excess of power that can either be stored locally or exported to the grid.