Low-complexity compressed sensing (CS) techniques for monitoring electrocardiogram (ECG) signals in wireless body sensor network (WBSN) are presented. The prior probability of ECG sparsity in the wavelet domain is first exploited. Then, variable orthogonal multi-matching pursuit (vOMMP) algorithm that consists of two phases is proposed. In the first phase, orthogonal matching pursuit (OMP) algorithm is adopted to effectively augment the support set with reliable indices and in the second phase, the orthogonal multi-matching pursuit (OMMP) is employed to rescue the missing indices. The reconstruction performance is thus enhanced with the prior information and the vOMMP algorithm. Furthermore, the computation-intensive pseudo-inverse operation is simplified by the matrix-inversion-free (MIF) technique based on QR decomposition. The vOMMP-MIF CS decoder is then implemented in 90 nm CMOS technology. The QR decomposition is accomplished by two systolic arrays working in parallel. The implementation supports three settings for obtaining 40, 44, and 48 coefficients in the sparse vector. From the measurement result, the power consumption is 11.7 mW at 0.9 V and 12 MHz. Compared to prior chip implementations, our design shows good hardware efficiency and is suitable for low-energy applications.
15 July 2021 in Journal of Signal Processing Systems
This article presents a high-throughput and low-routing complexity low-density parity check (LDPC) decoder design based on a novel second minimum approximation min-sum (SAMS) algorithm. The routing congestion is mitigated by reducing the required interconnections in the critical path of the routing network. The implementation and postlayout results with 28-nm 1P9M CMOS process show that the proposed design can achieve a throughput of 10.5 Gb/s for a millimeter-wave 60-GHz baseband system while satisfying the low bit error rate (BER) requirements (10 -7 ). The proposed design reduces the wiring in the routing network by 21% and improves the area by 12% compared to the conventional min-sum (MS) and normalized MS (NMS) algorithm. Additional hardware optimizations are obtained by considering the internal message passing resolution based on the BER and signal-to-noise ratio (SNR) requirements for a practical baseband system. The power consumption is efficiently reduced by the employment of a shared address generator that exploits the degree of parallelism to reduce the switching activity on a group of memory elements. The LDPC decoder is implemented with a core area of 0.14 mm 2 , power consumption of 81 mW at 312.5 MHz, and the area and power efficiency of 75 Gb/s/mm 2 and 10.2 pJ/bit, respectively.
6 January 2014 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a hardware-efficient architecture for 4×4 and 8×8 high-throughput MIMO detectors. The adopted non-constant K-best algorithm tends to keep more survival nodes in top search tree layers and reduce computational complexity in bottom layers as opposed to the conventional K-best algorithm. A pipelined architecture is used to generate one detection output per clock cycle, thus meeting multi-gigabit throughput requirements for advanced wireless communication systems. The proposed efficient folding scheme strikes a suitable balance between complexity and throughput. This paper also presents a discussion on the scalability of this architecture with respect to the setting of QAM size, K values, and antenna number. One 4×4 MIMO detector IC has been manufactured and one 8×8 MIMO detector layout has been realized, both in 90-nm CMOS technology. The 4×4 detector IC has 232 kilogates (KG). Its maximum measured throughput is 4.08 Gbps at 170-MHz operating frequency and 1.3-V core voltage. The 8×8 detector has 665 KG. Its post-layout simulation results show that it achieves 4.37-Gbps throughput at 182-MHz operating frequency and 0.9-V core voltage. Compared to earlier hard-output detectors, both implemented detectors demonstrate good normalized power and normalized hardware efficiencies.
: Feature extraction from photoplethysmography (PPG) signals is an essential step to analyze vascular and hemodynamic information. Different morphologies of PPG waveforms from different measurement sites appear. Various phenomena of missing or ambiguous features exist, which limit subsequent signal processing. : The reasons that cause missing or ambiguous features of finger and wrist PPG pulses are analyzed based on the concept of component waves from pulse decomposition. Then, a systematic approach for missing-feature imputation and ambiguous-feature resolution is proposed. : From the experimental results, with the imputation and ambiguity resolution technique, features from 35,036 (98.7%) of 35,502 finger PPG cycles and 36307 (99.1%) of 36,652 wrist PPG cycles can be successfully identified. The extracted features became more stable and the standard deviations of their distributions were reduced. Furthermore, significant correlations up to 0.92 were shown between the finger and wrist PPG waveforms regarding the positions and widths of the third to fifth component waves. : The proposed missing-feature imputation and ambiguous-feature resolution solve the problems encountered during PPG feature extraction and expand the feature availability for further processing. More intrinsic properties of finger and wrist PPG are revealed. The coherence between the finger and wrist PPG waveforms enhances the applicability of the wrist PPG.
5 March 2019 in IEEE Transactions on Circuits and Systems I: Regular Papers
A singular-value-decomposition (SVD) processor having adjustable precision for 8 x 8 multiple-input multiple-output precoding systems supporting up to 256-quadrature amplitude modulation (QAM) is designed and implemented. The memory-based architecture that consists of eight processing elements, each having two coordinate rotation digital computer modules, is employed. Golub-Reinsch SVD (GR-SVD) algorithm with Rayleigh quotient shift is used. Thus, two-phase operations are performed including bidiagonalization and implicit shifted QR for diagonalization. The split, deflation, and shift techniques of GR-SVD are helpful to accelerate the diagonalization and reduce the computation complexity. To cover the precision requirements for compact 256-QAM constellation and spatially correlated channels, hybrid datapath representations are used. The threshold for split and deflation can be adjusted and thus the precision of the SVD processor is variable according to the requirements. Although the high precision results in a large gate count, this SVD processor in 40-nm CMOS technology can complete the decomposition of an 8 x 8 matrix in 313 clock cycles averagely and is able to provide a throughput rate of 591K matrix/s with good power efficiency.