The report contained in this article is based on entropy generation for a reactive Eyring–Powell nanoliquid transfer past a porous vertical Riga device. In the developed model, the impacts of viscous dissipation, thermophoresis alongside nonlinear heat radiation and varying heat conductivity are modelled into the heat equation. The dimensionless transport equations are analytically tackled via Homotopy analysis method while the computational values of chosen parameters are compared with the Galerkin weighted residual method. Graphical information of the various parameters that emerged from the model are obtained and deliberated effectively. The consequences of this study are that the temperature field expands with thermophoresis, Brownian motion and temperature ratio parameters as the modified Hartmann number compels a rise in the velocity profile. The entropy generation rises with an uplift in fluid material term as well as Biot and Eckert numbers whereas Bejan number lessens with Darcy and Eckert parameters.
Theoretical investigation of variable mass diffusivity, thermal conductivity, and viscosity on unsteady squeezed flow of dissipative Casson fluid is presented. Physically, for any effective heat and mass transfer process, a proper account of thermophysical properties in such a system is required to attain the desired production output. The magnetized free convective flow of unsteady Casson fluid encompassing Joule dissipation, radiation, and chemical reactive influence is induced as a result of squeezing property. The governing model assisting the magnetized flow is formulated and transformed via an appropriate similarity transformation. The resulting set of ordinary differential equations is solved numerically using Chebyshev based Collocation Approach (CCA). However, variable viscosity, thermal conductivity, and mass diffusivity effects are seen to diminish the fluid flow velocities, temperature, and concentration respectively along with the lower plate. Heat and mass transfer coefficient, skin friction downsized to an increasing value of variable thermal and mass diffusivity parameters while variable viscosity pronounces the skin friction coefficient. Furthermore, the present analysis is applicable in polymer processing, such as injection molding, extrusion, thermoforming among others.
4 November 2020 in The European Physical Journal Plus