In the development process for a fractured-porous gas reservoir with developed fracture and active water, edge water or bottom water easily bursts rapidly along the fracture to the production well, and the reservoir matrix will absorb water, reducing the gas percolation channel and increasing the gas phase percolation resistance of the reservoir matrix, therefor reducing the stable production capacity and recovery efficiency of the gas reservoir. For this reason, this paper investigates physical simulation experimental technology and mechanisms as reported by both domestic and foreign scholars regarding water invasion in fractured-porous gas reservoirs. In this paper, it is considered that the future trend and focus of water invasion experiments will be to establish a more realistic three-dimensional physical model on the basis of fine geological description, combined with gas reservoir well pattern deployment and production characteristics, and to fully consider the difference between horizontal and vertical water invasion along the reservoir side; at the same time, dynamic parameters such as model pressure field and water saturation field can be obtained in real time. Based on this understanding of the water invasion mechanism of fractured-porous gas reservoirs, we propose the next research direction and the development countermeasures such as water controls, drainage, and dissolved water seals and water locks to combat water invasion in reservoirs, along with the injection of gas to replenish formation energy, etc., so as to slow down and control the influence of water invasion.

Carbonate gas reservoirs in China are rich in reserves. In the development process, there are many reserves with low permeability, low efficiency and low recovery degree. It is difficult to stabilize gas well production and prolong its life cycle. Under the condition of original water saturation (Sw) of 0%, 20%, 40%, 55% and 65%, respectively, the physical simulation experiment of gas reservoirs depletion development was carried out by using long core multi-point embedded pressure measuring system. The long cores with average gas permeability of 2.300 mD, 0.485 mD and 0.046 mD (assembled from 10 carbonate cores) were used to carry out this experiment. During the experiment, the pressure dynamics at different positions inside the long core and the gas production dynamics at the outlet were recorded in real time to reveal the production performance and reserves utilization law of carbonate gas reservoirs. The results show that the stable production period of tight reservoir in carbonate gas reservoirs is short, and the low production period is relatively long. The stable production time and recovery rate of gas reservoir increase with the increase of reservoir permeability and decrease with the increase of water saturation. The production of tight carbonate gas reservoirs with permeability less than 0.1 mD is greatly affected by pore water, and the reservoir pressure distribution shows a steep pressure drop funnel, and the reserves far from well are rarely used. Therefore, the reserves far from well should be utilized by closing well to restore formation pressure balance, densifying well pattern or transforming reservoir. The variation range of water saturation in the development of carbonate gas reservoirs is influenced by reservoir permeability and water saturation, and closely related to formation pressure gradient in production process. It decreases with the increase of reservoir permeability and increases with the increase of original water saturation. The research results provide a theoretical basis for understanding the relationship between physical properties of carbonate gas reservoirs and production performance, reserves utilization law, and realizing balanced utilization, efficient development and long-term stable production of carbonate gas reservoirs.

Thin layers and high-yield dolomite reservoirs were recently discovered in the Permian Guadeloupian Maokou Formation. The genetic mechanism of this reservoir is controversial because of its complex sedimentation and diagenesis in the Maokou Formation. Traditionally, the genesis has focused on sedimentation, karst, and fracture, whereas the influence of the Emeishan mantle plume activity (EMP) has been ignored. In this study, we enumerated petrographic (grouped into micritic bioclastic limestone, limy dolomite, grain dolomite, dolomite cement, calcite cement, and saddle dolomite) and geochemical data (δ¹³C, δ¹⁸O, REE, and ⁸⁷Sr/⁸⁶Sr) from a microscopic perspective to support the impact of EMP on reservoirs. We conclude that EMP activity altered the sedimentary environment and induced a complex diagenesis. The paleogeomorphic reconstruction data indicate that the EMP caused an uplift zone in the NE–SW direction, depositing advantageous high-energy beach facies. In terms of diagenesis, the abnormally high ⁸⁷Sr/⁸⁶Sr ratios and REE with positive Eu anomalies suggest that dolomitization was influenced by both seawater and hydrothermal fluids. Based on the above evidence, we established a reservoir genetic model for the Maokou Formation related to the intensity of the EMP. This study provides a new perspective on the mantle plume activity for the study of carbonate reservoir genesis.

The influence of the type of lamina and its combination on the reservoir quality in deep-sea shales of the Zigong Block in the southern Sichuan Basin was investigated. The shale reservoirs in the Wufeng and Longmaxi Formations were characterized in detail by employing a variety of advanced techniques such as full-scale thin section imaging, micro-X-ray fluorescence spectroscopy (Micro-XRF), field emission scanning electron microscopy, and a quantitative mineral evaluation system (QEMSCAN). This study systematically analyzed the structural characteristics of different types of lamina and their effects on the reservoir porosity, permeability, and gas content. The findings reveal that the type and combination of laminae significantly affect the reservoir quality of shale. Among the identified combinations, the "authigenic quartz-organic matter + carbonate + felsic-carbonate" lamina combination demonstrates the most favorable characteristics, with higher organic content, brittle mineral content, and porosity, making it the optimal "sweet spot" for shale gas development. This research provides crucial theoretical insights into the formation mechanisms of deep marine shale gas reservoirs and supports further advancements in shale gas exploration and development.

The propagation pattern of pressure drawdown effectively reflects the recoverable reserves range around the gas well and serves as a crucial basis for development strategies. However, it is not easy to detect the pressure propagation boundary near the producing well, especially in low-permeability reservoirs where the drainage radius is small. Physical simulation experiments can serve as a crucial method as the whole pressure profile and gas rate can be obtained in real time. Using long core plugs with permeabilities of 2.300 mD, 0.486 mD, and 0.046 mD, physical simulation experiments were carried out under varying initial water saturation (Swi) conditions of 0%, 20%, 40%, and 55% to observe the dynamic variations in pressure profiles of the core plugs during pressure depletion. Based on the material balance equation and pressure profile characteristics of the core plugs, a method for evaluating recoverable reserves within a well-spacing radius through laboratory experiments was proposed and performed. Mechanism analysis was conducted based on mercury injection tests, and suggestions for enhancing gas recovery were presented. Research findings indicate that lower permeability, higher initial water saturation, and higher abandonment gas rates result in reduced reserve utilization range and degree. Under abandoned gas rate conditions, for type I and II rocks, the pore radius is primarily distributed between 0.1 and 1 μm, the pressure drawdown can reach the well-spacing radius of 600 m, and the ultimate recovery efficiencies are more than 70.6%. For type III rocks, the pore radius mainly falls below 0.1 μm, the drainage radius is smaller than 10 m with Swi greater than 40%, and the ultimate recovery is below 10%. This paper provides an experimental method for recoverable reserves evaluation while formulating gas reservoir development strategies before well testing.

The late-stage development of gas reservoirs often encounters the paradox of significant remaining formation pressure coupled with low wellhead pressure, which indicates small drainage volume, low gas production rate, and low recovery efficiency, reducing gas supply and economic benefit. Owing to the lack of experimental research, the reasons behind this contradiction between gas production and producing pressure differential are unclear. The key factors affecting the development outcomes are reservoir permeability and initial water saturation, while the evaluation parameters include gas and water production rates, reservoir pressure, and recovery efficiency. Based on the characteristic properties of typical gas fields, physical simulation experiments of constant-rate gas production are conducted on spliced long cores with average permeabilities of 2.300, 0.486, and 0.046 millidarcy (mD). Furthermore, leveraging the multi-point embedded pressure measurement technique, the pressure drawdown propagations and the macroscopic and microscopic characteristics of connate water production at the initial water saturations of 0%, 20%, 40%, and 55% are investigated. By connate water, we mean water that occurs naturally within the pores of rock. Pre- and post-experiment core weighing and nuclear magnetic resonance testing are performed. In addition to the mercury injection tests, the results indicate that during gas reservoir depletion, connate water primarily stems from macropores and mesopores, with micropores and nanopores capturing water through capillary imbibition. Moreover, lower permeability and higher initial water saturation lead to greater pressure gradients, increased connate water production, and reduced recovery efficiency. Reservoirs with permeabilities below 0.1 mD are significantly affected by connate water, exhibiting steep pressure profiles. Owing to connate water, the near-wellbore pressure quickly decreases, while distant reservoir pressure barely decreases, implying a limited drainage area. To enhance the recovery efficiency, measures like infill drilling and reservoir stimulation are recommended for low-permeability gas reservoirs.