Fluids have played and still play a vital role in attaining an optimized output from industrial processes. However, due to technological advancement, fluids with high hydrothermal characteristics are required. In order to overcome these challenges, researchers have developed fluids with dispersed nanoparticles, which are recognized as nanofluids. Various types of nanoparticles can be added to base fluids to produce thermally enhanced liquids. Among these, the addition of multi-walled carbon nanotubes (MWCNTs) is considered the best due to the considerable enhancement of thermophysical properties and the stability of the solution. Thus, in the present investigation, an analysis of the heat transfer characteristics of an MWCNT–water nanofluid included in a star-shaped cavity equipped with a hot rectangular baffle is conducted. In addition, a uniform magnetic field is applied along the x-direction to oppose the convective flow generated by variations in density. Mathematical formulations under assumed boundary conditions and physical assumptions are established in the form of dimensionless PDEs. The finite-element-method-based software “COMSOL” is used to execute the numerical simulations. PARADISO is employed to resolve the developed non-linear system of equations. The effects of the governing parameters on the velocity and temperature fields are presented through streamlines and isotherms. The Nusselt number is evaluated to depict the impact of the addition of nanoparticles (MWCNTs) on the heat transfer enhancement. Changes in the horizontal and vertical components of velocity are also evaluated against the Rayleigh number and nanoparticle volume fraction via cutline representation.
19 January 2021 in Mathematical Problems in Engineering
Thermodynamical attributes of non-Newtonian fluids over stretched surfaces have gained pervasive essence due to extensive utilization in extruding plastic sheet procedures, liquid film condensation, glass blowing, paper production, biopolymer cylinder coatings, and so forth. So, currently communication is aimed to candidly explicate flow characteristic of Prandtl fluid generated by axial stretching of cylindrical surface. Mathematical modelling by using conservation laws of momentum, energy and concentration fields containing the aspects of magnetic field, convective heating, and chemical reaction are presented initially in the form of partial differential expressions. Later on, these attained PDEs are transmuted into nonlinear ordinary differential equations with implementation of similarity variables. Numerical approach renowned as shooting technique with improved coefficient of the Runge–Kutta (R–K) method by Cash and Karp is used to access accurate solution. Linear curved fitting analysis is also performed to analyze results. Influence of flow-controlling parameters on associated profiles is revealed through graphical visualization. Stream line plots representing flow behavior of Prandtl fluid versus different magnitudes of the curvature parameter are adorned. Variation in friction drag force at wall, heat flux, and concentration gradient are evaluated through numerical data and with interpolation of linear curved fittings. It is deduced from results that increasing curvature parameter momentum and temperature distributions enriches whereas skin-friction coefficient depicts reverse pattern. It is also inferred that temperature shows incrementing deviation in the absence of chemical reaction whereas concentration profiles exhibit reduction with consideration of influence of chemical reaction parameter. Magnetic field tends to reduce the velocity and create thinness of boundary layer thickness.
Currently, pagination clearly explains the increase in the thermophysical attributes of viscous hybrid nanofluid flow by varying morphological aspects of inducted triadic magnetic nanoparticles between two coaxially rotating disks. Copper metallic nanoparticles are inserted with three different types of metallic oxide nanoparticles: Al2O3, Ti2O, and Fe3O4. Single-phase simulation has been designed for the triadic hybrid nanofluids flow. The achieved expressions are transmuted by the obliging transformation technique because of dimensionless ordinary differential equations (ODEs). Runge–Kutta in collaboration with shooting procedure are implemented to achieve the solution of ODEs. The consequences of pertinent variables on associated distributions and related quantities of physical interest are elaborated in detail. It is inferred from the analysis that Cu-Al2O3 metallic type hybrid nanofluids flow shows significant results as compared with the other hybrid nanoparticles. The injection phenomenon on hybrid nanofluids gives remarkable results regarding shear stress and heat flux with the induction of hybridized metallic nanoparticles. Shape and size factors have also been applied to physical quantities. The morphology of any hybrid nanoparticles is directly proportional to the thermal conductance of nanofluids. Peclet number has a significant effect on the temperature profile.
A study on strategies regarding advancement in heat transfer characteristics in two-dimensional closed domains by placing cold cylinders is conducted. This effort is undertaken due to the fact that active and passive control in heat transmission is connected with provision of temperature differences at different locations of enclosures. Based on the experiments, researchers have concluded that placement of cold cylinder in non-uniformly distributed heat in a cavity is the most effective technique to enrich heat transfer rate, along with reducing the the waste of extra heat generation in processes such as polymer and aero dynamical extrusion, glass cooling, refrigeration, heating and cooling systems. Thus, the prime goal of this work is to outline heat and flow characteristics of non-linear fluid occupied in a square enclosure with adjustment of the cold cylinder. Heat transfer attributes are incorporated by accounting buoyancy forces and forming coupling of molecular diffusion of fluid within the flow domain. Formulation of the problem in dimensionless form is attained by encapsulating the aspects of natural convection in view of principal partial differential equations. Parametric study for governing expressions is computed numerically with the finite element method based on COMSOL Multiphysics version 5.6. Quadric interpolating functions are used to obtain information about velocity and temperature on nodes in elements. Hybrid meshing is manifested for discretization of the domain into rectangular and triangular elements. For the optimized variation in flow structures, prospective parameters are varied from and . The achieved results are projected graphically through streamlines, isotherms, and local and average Nusselt numbers. Tabular data for kinetic energy and wall heat flux are also calculated. It is inferred through the analysis that, with uplift in the Rayleigh number elevation in the magnitude of kinetic energy and convective heat transfer arises, whereas the reverse pattern is depicted versus the power–law index
17 May 2023 in Case Studies in Thermal Engineering