Complex engineering problems are often required to be addressed for multiobjective optimization. Wire electric discharge machining is one such multiobjective optimization problem. Conflicting objectives such as material removal rate, surface roughness and kerf have always been research interest for optimization. In this article, a novel optimization strategy has been formulated by coupling grey relational analysis with firefly algorithm to optimize the responses. Process parameters such as pulse-on time, pulse-off time, peak current and servo voltage are studied. Response parameters such as material removal rate, surface roughness and kerf are considered. Firefly algorithm is the main technique and grey relational analysis is used to generate a grey relational grade. This grade is further used in firefly algorithm for movement of firefly to the neighboring brighter and attractive firefly. In this process of self-organization, simultaneous optimal solution for material removal rate, surface roughness and kerf is obtained. Peak current is found to be the most influencing factor affecting all the three responses. Pareto surface plot is also plotted to recommend alternate solutions for various responses based on the priorities. As the proposed strategy is generalized, it can be customized and applied for any multiobjective optimization problem.
3 February 2025 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Aluminum alloys, broadly used in aerospace and automotive, are particularly susceptible to fatigue failures. The grain refinement characteristics can improve the fatigue behavior of aluminum alloys, which can be achieved using friction stir welding (FSW). The primary aim of this study is to examine how incorporating a brass insert influences the fatigue crack growth behavior of AA6061-T6 alloy welded through FSW, comparing welds with and without the insert. Microstructural analysis showed fine recrystallized grains are obtained for both welds. However, welding with the insert exhibited smaller grains. Moreover, robust intermetallics are formed for welding with insert due to the intermixing reaction at FSW temperature, which improves mechanical properties such as hardness and tensile strength. The findings on fatigue indicate that the fatigue resistance of the weld with insert is significantly high, which can be attributed to the increased grain boundaries and development of strong intermetallic compounds, which hindered the crack propagation. Fractographic analysis of the fracture surfaces indicated the presence of striation marks in the weld with the insert, which slowed crack propagation and prolonged fatigue life. The findings suggest real-world applications in industries, where improving the fatigue life and structural reliability of welded aluminum components is critical.
1 November 2021 in Journal of Physics: Conference Series
Lathe turning is one of the manufacturing sector’s most basic and important operations. From small businesses to large corporations, optimising machining operations is a key priority. Cooling systems in machining have an important role in determining surface roughness. The machine learning model under discussion assesses the surface roughness of lathe turned surfaces for a variety of materials. To forecast surface roughness, the machine learning model is trained using machining parameters, material characteristics, tool properties, and cooling conditions such as dry, MQL, and hybrid nano particle mixed MQL. Mixing with appropriate nano particles such as copper, aluminium, etc. may significantly improve cooling system heat absorption. To create a data collection for training and testing the model, many standard journals and publications are used. Surface roughness varies with work parameter combinations. In MATLAB, a Gaussian Process Regression (GPR) method will be utilised to construct a model and predict surface roughness. To improve prediction outcomes and make the model more flexible, data from a variety of publications was included. Some characteristics were omitted in order to minimise data noise. Different statistical factors will be explored to predict surface roughness.
Since engineering discipline is at the forefront of latest innovations and developments, there is an increasing emphasis on the critical responsibilities of engineers towards sustainability. There are several studies investigating the incorporation of sustainability principles into engineering curriculum but studies analyzing the knowledge, attitude, and behavior of engineering students are lacking. A deeper understanding of the current state of students’ knowledge, attitude, and behavior towards sustainability is crucial to determine the type of pro-sustainability trainings, strategies and pedagogical activities needed. Hence, the current study is aimed at assessing the level of sustainability cognizance of Mechanical Engineering students via an online Sustainability Consciousness Questionnaire. The final sample size was 134 students from a Higher Education Institute in India with 90% male responders and 52% from urban areas. Results indicate that 70% of the respondents have heard of the Sustainable Development Goals, only around 32% of the students demonstrate a positive behavior and attitude towards sustainability whereas 30% of the students do not hold any opinion towards sustainability principles. The current exploratory study contributes to the knowledge base about sustainability awareness and consciousness and advocates for measures to insert its principles in engineering courses.