Understanding the atomic-level phenomena occurring upon the wetting of graphene-coated Cu with liquid Ag is pivotal for the description of the wetting phenomenon and the role of graphene as a diffusion barrier. We have performed molecular dynamics (MD) simulations and confronted with our present experimental results to characterize wetting behavior of graphene coated Cu surfaces. Perfect and defected graphene layers covering Cu surface were wetted with liquid Ag droplet at 1273 K. Structural and topological aspects are discussed to characterize structure of the liquid Ag droplet and a product of wetting reaction occurring on Cu/Gn and Cu/Gndef substrates, also including perfect graphene layer and a pure Cu surface. The obtained results reveal the importance of defects in graphene structure, which play a key role in wetting mechanism and the formation of AgCu alloy. As a consequence, we observe a change of the wetting behavior and topology of both bulk and adsorbed Ag atoms by using Voronoi analysis (VA). Despite the differences in time scale, atomistic simulations allowed us to catch the early stages of wetting, which are important for explaining the final stage of wetting delivered from experiment. Our findings reveal also graphene translucency to metal-metal interactions, observed in previous papers.
Oxidation results in the formation of an oxide film whose properties and structure can be tailored by controlling the oxidation conditions. Reactive molecular dynamics simulations were performed to study thermal oxidation of polycrystalline Al substrates as a function of O2 density and temperature. The structural, chemical, and topological aspects of polycrystalline Al (poly-Al) substrates and oxide films formed upon oxidation were studied. The studies were supported by surface topography and morphology analyses before and after oxidation. An analysis of Al–O atomic pair distribution showed the development of long-range order in the oxide films grown upon exposure to low-density (0.005 g/cm3) and high-density (0.05 g/cm3) O2 gas. The long-range order was more apparent for the high-density environment, as the oxide films formed in low-density O2 gas did not fully cover the poly-Al surface. The dominance of over-coordinated polyhedral units in a tightly packed structure was indicative of medium- and long-range atomic order in the oxide films. The two-phase structure of the oxide was found in the films, with a crystalline phase at the metal/oxide interface and an amorphous phase at the oxide/O2 interface. The combination with topological analyses supported the conclusions of the chemical analysis and enabled us to capture an amorphous-to-crystalline phase transformation in the oxide films with increasing oxygen density and temperature. An important effect of Al surface roughness before oxidation on the behavior of the metal/oxide interface and on the oxide film structure was observed.
The wetting behavior and intermetallic compounds formation at the liquid Sn/Ni solid interface were studied using molecular dynamics (MD) simulations and supported with experimental studies. MD simulations and experiments were performed at 513, 533, and 553 K to evaluate the influence of temperature on wetting dynamics and the formation of Ni–Sn intermetallic compounds. Ni dissolution into the Sn drop leads to the occurrence of a reaction zone that thickens with time and temperature. It is a mixture of intermetallic compounds and amorphous Sn-enriched alloy at 553 K, as confirmed by structural analysis and intermetallic phase distribution maps. The growth of the reaction zone leads to a decrease in both the fraction and concentration of solute in the liquid phase. Experimental wetting tests based on the sessile drop method confirm the trends in contact angle decrease and spreading behavior with increasing wetting temperatures. This study provides atomic-scale insight into the dissolution process at the liquid/solid interface and wetting phenomenon, offering valuable data for the development of lead-free solder technologies. Graphical Abstract